Mini distributor category 6A TH35 MPD6-HS K - Patch panel copper 2x RJ45 8(8) J02021A0055

Mini distributor category 6A TH35 MPD6-HS K - Patch panel copper 2x RJ45 8(8) J02021A0055 – Telegärtner – 4018359368203: Mini distributor Cat.6A TH35MPD6-HS K J02021A0055, number of sockets/couplings=6, suitable for number of sockets/couplings=6, connector type=RJ45 8(8), shielded=no, category=6A (IEC), connection type= LSA, number of height units (U)=3, color=other, mounting type=DIN rail, height=23.4 mm, width=111.6 mm, depth=95.8 mm, small networks do not necessarily require 19 inch cabinets or large wall cabinets. Simple, inexpensive distributors are in demand that can be installed discreetly and unobtrusively. The compact distributor housing can be mounted on the wall, under the desk, in the furniture and, thanks to the integrated adapter, also on DIN EN 60715 mounting rails TH35. The MPD6 mini distributor in LSA category 6A version - with component certificate according to ISO/IEC 11801 - is available for the highest transmission rates up to and including 10 Gbit/s. The RJ45 sockets are designed for at least 750 mating cycles with RJ45/RJ11/RJ12 plugs and are also suitable for applications such as PoE+ according to IEEE 802.3at. 360 degree shielding contact (shielded version) directly on the printed circuit board using a clamp without additional twisting of the shielding braid, shielding hood made of stainless steel, connection of the wires via LSA Plus insulation displacement terminals with color coding according to EIA/TIA 568A and B, connection-friendly when adhering to the twisted section of the Connection wires to max. 13 mm, Cat.6A (ISO/IEC) & Cat.6A versions with contact overbending protection: suitable for 6- (RJ11/12) and 8-pin plugs (RJ45), can be used alternately in the MJ sockets are used, slide-in versions 3 HU/7 TE with 6xRJ45 and 3 HU/10 TE with 12xRJ45, anodised aluminum front panel, housing made of thermoplastic, halogen-free, with anti-slip feet, cable strain relief with enclosed cable ties without screws and special tools, printed circuit board Horizontally mounted, shielded versions are provided with an internal metal shielding can. In addition, a PE cable (with M4 screw) can be fixed on the printed circuit board, MPD6, MPD8 MPD12 mini-splitters with 6, 8 or 12 RJ45 sockets on a common printed circuit board, MPD8 AMJ/UMJ and MPD12 AMJ/UMJ mini-splitters for 8 or 12 AM-S/AMJ/UMJ modules and couplings, tool-free attachment of the shielding hood (shielded version), suitable for RJ45/11/12 plugs, for TH35 mounting rail, design: 6-way mini distributor metal incl. 2 mounting rail adapters, MPD6-HS K Cat.6A (ISO/IEC)