Sensor interior light - Ceiling-/wall luminaire RS PRO LED P2 NW

Steinel - RS PRO LED P2 NW - Sensor interior light - Ceiling-/wall luminaire RS PRO LED P2 NW
Photo source: fig. possibly similar
Photo source: fig. possibly similar
RS PRO LED P2 NW 056070 4007841056070 EAN/GTIN DE 39896667 WEEE

Our best price
$85.15 excl. VAT
$134.98 (-36.92% RRP***)

4-5 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Ceiling-/wall luminaire, Suitable for wall mounting yes, Suitable for pendulum suspension no,... more
Sensor interior light - Ceiling-/wall luminaire RS PRO LED P2 NW – Steinel – 056070 – 4007841056070: Ceiling-/wall luminaire, Suitable for wall mounting yes, Suitable for pendulum suspension no, Suitable for ceiling mounting yes, Suitable for recessed mounting no, Suitable for surface mounting yes, Illuminant LED not interchangeable, With illuminants yes, Suitable for light band configuration no, Lamp holder other, Material of the housing Plastic, Housing color white, Material of the cover Plastic opal, Type of grid without, Voltage AC, Rated voltage 220..240 V, LED rated current at constant current 400 mA, Operating device LED operating device current-controlled, With operating device yes, Dimming 0-10 V no, Dimming 1-10 V no, Dimming DALI no, Dimming DMX no, Dimming DSI no, Dimming Potentiometer (device-integrated) no, GPRS dimming no, Dimming LineSwitch no, Dimming manufacturer-specific no, Dimming Mains voltage modulation no, Dimming Phase section no, Dimming Phase control no, Programmable dimming yes, Dimming RF no, Dimming Sine Wave Reduction no, Dimming Touch and Dim no, Dimming Zigbee no, Dimming with push-button no, Without dimming function no, light distributor without, Light distribution symmetrical, Beam angle extremely wide beam > 80 °, Light outlet directly, Degree of protection (IP) IP54, Impact resistance IK03, Protection class II, Suitable for emergency light no, With motion detector yes, With light sensor yes, With louvers no, Suitable for lamp power 16 W, Max. System performance 16 W, Rated luminous flux according to IEC 62722-2-1 1810 lm, Light color white, Color temperature 4000K, Color rendering index CRI 80-89, luminous efficacy 113.125 lm/W, Power factor 0,91, Height/depth 110 mm, Number of poles 2, Conductor cross-section 2.5 mm², Connection type other
... more
Suitable for wall mounting yes
Suitable for pendulum suspension no
Suitable for ceiling mounting yes
Suitable for recessed mounting no
Suitable for surface mounting yes
Suitable for light band configuration no
Version other
Material of the housing Plastic
Housing Color white
Material of the cover Plastic opal
Execution of the grid without
Voltage AC
Nominal voltage 220..240 V
Control gear LED operating device current-controlled
With operating device yes
Dimming 0-10 V no
Dimming 1-10 V no
Dimming DALI no
Dimming DMX no
Dimming DSI no
Dimming potentiometer (integrated in device) no
GPRS dimming no
Dimming LineSwitch no
Dimming manufacturer-specific no
Dimming Mains voltage modulation no
Dimming Phase section no
Dimming Phase control no
Programmable dimming yes
Dimming RF no
Dimming Sine Wave Reduction no
Dimming Touch and Dim no
Dimming Zigbee no
Dimming with push-button no
Dimming dependent on control gear no
Without dimming function yes
light distributor without
Light distribution symmetrical
Beam angle extremely wide beam > 80 °
Light output directly
IP protection) IP54
Impact resistance IK03
Protection class II
Suitable for emergency light no
With motion detector yes
With light sensor yes
With louvres no
Suitable for lamp power 15.4 W
Max. System performance 15.4 W
luminous efficacy 112,403 lm/W
Rated luminous flux according to IEC 62722-2-1 1731 lm
Light color white
Color temperature 4000K
Color rendering index CRI 80-89
Power factor 29,6 W
Height / depth 110 mm
Length 110 mm
Outer diameter 320 mm
Number of poles 2
Cross section 2.5 mm²
Connection other
Distortion factor (THD) 16.9
Photobiological safety according to EN 62471 RG1
Compatible with Amazon Alexa no
Lamp LED not interchangeable
With bulbs yes

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Sensor interior light - Ceiling-/wall luminaire RS PRO LED P2 NW"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.