Direct starter 400V/0.9KW 0.15A-2A 3RK1304-5KS70-2AA3

Siemens - 3RK1304-5KS70-2AA3 - Direct starter 400V/0.9KW 0.15A-2A 3RK1304-5KS70-2AA3
Photo source: fig. possibly similar
Photo source: fig. possibly similar
3RK1304-5KS70-2AA3 4011209680487 EAN/GTIN DE 23691322 WEEE

$841.74 excl. VAT

15-16 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
DOL starter 400V/0.9KW 0.15A-2A 3RK1304-5KS70-2AA3 Type of motor starter DOL starter, With... more
Direct starter 400V/0.9KW 0.15A-2A 3RK1304-5KS70-2AA3 – Siemens – 4011209680487: DOL starter 400V/0.9KW 0.15A-2A 3RK1304-5KS70-2AA3 Type of motor starter DOL starter, With short-circuit release, Rated control supply voltage Us at AC 50 Hz 400 ... 400V, Rated control supply voltage Us at DC 20.4 ... 28.8V, Type of voltage for actuation DC, rated operational power at AC-3, 400 V 0.9 kW, rated operational current Ie 2A, rated operational current at AC-3, 400 V 2A, overload release current setting 0.15 ... 2A, tripping class other, connection type main circuit flat plug connection, type of coordination according to IEC 60947-4-3 class 1, degree of protection (IP) IP65, width 110mm, height 230mm, depth 160mm, full motor protection consisting of: electronic overload protection + thermistor 3 AC 400 V/0.9kW 0.15 A...2.00 A Brake contact AC 400 V 4DI Han Q4/2 - Han Q8/0 SIMATIC ET 200pro motor starters for operational switching of three-phase motors in the field, with short-circuit and overload protection and for fully TIA-integrated, highly automated applications, e.g. in conveyor technology. The multifunctional motor starters are fully integrated in the ET 200pro I/O system. The quick and extensive configuration takes place in the TIA Portal. Use without a control cabinet thanks to the high degree of protection IP65/67. Consistent communication via PROFIBUS and PROFINET. Due to the wide adjustment range, the effort for storage and project planning is reduced with low device variance. The simple installation thanks to the wiring bus and plug-in technology enables the motor starter to be replaced quickly and increases system availability. The Motor Starter ES software is available for configuration, commissioning, operation and diagnostics. PROFIenergy supports active and efficient energy management. The devices are approved worldwide (eg IEC, CCC and UL/CSA) and IE3/IE4ready. Available as a direct or reversing starter with different motor current ranges, as a standard or high-feature variant (incl. soft start function). A repair switch module can be used as an option to ensure safe disconnection for all downstream motor starters during repair work. In addition, there is a fail-safe repair switch and a switch-off module for fail-safe applications. Motor starter ET 200pro - compact and intelligent.
... more
Type of motor starter Direct starter (DOL)
With short-circuit release yes
Voltage type for actuation DC
Rated operating power at AC-3, 400V 0.9 kW
Rated operational current Ie 2 A
Rated operating current at AC-3, 400 V 2 A
Overload release Current setting 0.15..2 A
Trip class other
Connection type main circuit Blade terminal
With transformer no
Assignment type according to IEC 60947-4-3 Class 1
IP protection) IP65
Supports protocol for ASI no
Width 110 mm
Height 230 mm
Depth 160 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Direct starter 400V/0.9KW 0.15A-2A 3RK1304-5KS70-2AA3"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.