Converter Sinamics 1, 1kW unfiltered - Frequency converter 200...240V 1,1kW 6SL3210-5BB21-1UV1
6SL3210-5BB21-1UV1
4042948676950
EAN/GTIN
DE 23691322
WEEE
Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.
Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.
Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Converter SINAMICS 1.1kW unfiltered 6SL3210-5BB21-1UV1 Mains voltage 200 ... 240V, mains...
more
Converter Sinamics 1, 1kW unfiltered - Frequency converter 200...240V 1,1kW 6SL3210-5BB21-1UV1 – Siemens – 4042948676950: Converter SINAMICS 1.1kW unfiltered 6SL3210-5BB21-1UV1 Mains voltage 200 ... 240V, mains frequency 50/60 Hz, number of input phases 1, number of output phases 3, max. output frequency 550Hz, max. output voltage 240V, rated output current I2N 6A, max. power output at square . Load at rated output voltage 1.1kW, Max. power output with linear load at rated output voltage 1.1kW, Relative symmetrical mains frequency tolerance -5%, Relative symmetrical mains voltage tolerance -15%, Number of analog outputs 1, Number of analog inputs 2, Number of digital outputs 2, Number of digital inputs 4, With control element, Can be used in industrial areas, Supports protocol for MODBUS, Supports protocol for other bus systems, Number of HW interfaces Industrial Ethernet 0, Number of interfaces PROFINET 0, Number of HW interfaces serial RS- 232 1, number of HW interfaces serial RS-422 0, number of HW interfaces serial RS-485 1, number of HW interfaces serial TTY 0, number of HW interfaces USB 0, number of HW interfaces parallel 0, Number of HW interfaces others 1, type of converter U converter, degree of protection (IP) IP20, height 160.9mm, width 91mm, depth 147mm, SINAMICS V20 1 AC 200-240 V - 10/+ 10 % 47-6 Rated power 1.1 kW with 150 % overload for 60 s unfiltered I/O interface: 4 DI, 2 DO, Fieldbus: USS/MODBUS RTU with built-in BOP protection : IP20/ UL open Str.: Str. AC 160x90x147(HxWxD) frequency converter SINAMICS V20. Easy. Robust. Efficient. For industrial and commercial applications in the 1AC 200 V to 240 V voltage range. SINAMICS V20 is characterized by short commissioning times, simple operation, robustness and cost efficiency. The converter can be operated straight out of the box without additional modules. To increase energy efficiency, the converter is equipped with an energy-optimized control process with automatic flux reduction. It also shows the current energy consumption and has other integrated energy saving functions. The keep-running mode enables stable operation even under difficult and fluctuating network conditions. The converter is available in nine sizes in a power range from 0.12 kW to 30 kW for operation on single and three-phase networks (200 V to 240 V 1AC, 380 V to 480 V 3AC). The SINAMICS V20 can be individually adapted to the requirements of the application using various options, such as the local Basic Operator Panel (BOP) or mobile SINAMICS V20 Smart Access Module operating unit, BOP interface, standard network cable, line filter, braking resistors, shielding, etc. It also enables simple system configuration with predefined macros in the converter and ready-made function blocks from the Totally Integrated Automation Portal (TIA Portal) for quick connection to a SIMATIC S7-1200 controller, for example. The SINAMICS V20 basic converter is a technical and economical alternative to the Micromaster 420 frequency converter. SINAMICS - simply my drive.
...
more
Mains voltage | 200..240 V |
Power frequency | 60 Hz |
Input phase number | 1 |
Output phase number | 3 |
Max. Output frequency | 550 Hz |
Max. Output voltage | 240V |
Rated output current I2N | 6A |
Relative symmetric power frequency tolerance | -5% |
Relative symmetrical mains voltage tolerance | 10% |
Number of analog outputs | 1 |
Number of analog inputs | 2 |
Number of digital outputs | 2 |
Number of digital inputs | 4 |
With operating element | yes |
Use in the industrial sector permitted | yes |
Use in residential and commercial areas permitted | no |
Supports protocol for TCP / IP | no |
Supports protocol for PROFIBUS | no |
Supports protocol for CAN | no |
Supports protocol for INTERBUS | no |
Supports protocol for ASI | no |
Supports protocol for KNX | no |
Supports protocol for MODBUS | yes |
Supports data highway protocol | no |
Supports protocol for DeviceNet | no |
Supports protocol for SUCONET | no |
Supports protocol for LON | no |
Supports protocol for PROFINET IO | no |
Supports protocol for PROFINET CBA | no |
Supports protocol for SERCOS | no |
Supports protocol for EtherNet / IP | no |
Supports protocol for DeviceNet Safety | no |
Supports protocol for INTERBUS safety | no |
Supports protocol for PROFIsafe | no |
Supports protocol for SafetyBUS p | no |
Supports protocol for other bus systems | yes |
Number of HW interfaces serial RS-232 | 1 |
Number of HW interfaces serial RS-485 | 1 |
Number of HW interfaces other | 1 |
With optical interface | no |
With PC connection | no |
Integrated brake chopper | no |
4-quadrant operation possible | no |
Type of inverter | Voltage converters |
IP protection) | IP20 |
Height | 160,89999999 mm |
Width | 91 mm |
Depth | 147 mm |
Cookie settings
This website uses cookies that are required for the technical operation of the website and always stored. Other cookies that enhance convenience when using this website, or that are intended for direct marketing or to simplify interaction with other websites and social networks, are only stored with your consent.
Configuration
Technically required
These cookies are required for the basic functions of the shop.
Accept all cookies
Amazon Pay
CSRF token
Cookie settings
Currency change
Customer recognition
Customer-specific caching
FACT-Finder tracking
Individual prices
Reject all cookies
Selected shop
Session
Wish list
Device recognition
Saferpay payments
PayPal payments
IP2location
Listing settings
Trustami
Wishlist
TagManager
Statistics and tracking
Google analytics
Partner program
Custom tracking