Circuit breaker D25A,2pol,T=70.10kA 5SY4225-8

Siemens - 5SY4225-8 - Circuit breaker D25A,2pol,T=70.10kA 5SY4225-8
Photo source: fig. possibly similar
Photo source: fig. possibly similar
5SY4225-8 4001869202303 EAN/GTIN DE 23691322 WEEE

$79.10 excl. VAT
$136.05 (-41.86% RRP***)

15-16 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Built-in depth=70 mm, Release characteristic=D, Number of poles (total)=2, Number of protected... more
Circuit breaker D25A,2pol,T=70.10kA 5SY4225-8 – Siemens – 4001869202303: Built-in depth=70 mm, Release characteristic=D, Number of poles (total)=2, Number of protected poles=2, Rated current=25 A, Rated voltage=400 V, Rated insulation voltage Ui=440 V, Rated impulse withstand voltage Uimp=4 kV, Rated short-circuit breaking capacity Icn according to EN 60898 at 230 V=10 kA, Voltage type=AC, Rated short-circuit breaking capacity Icn according to EN 60898 at 400 V=10 kA, Rated short-circuit breaking capacity Icu according to IEC 60947-2 at 230 V=20 kA, Rated short-circuit breaking capacity Icu according to IEC 60947-2 at 400 V=20 kA, Frequency=50 Hz, Current limiting class=3, Flush-mounted installation=no, Concurrently switching neutral conductor=no, Over voltage category=3, Pollution degree=3, Additional equipment possible=yes, Width in number of modular spacings=2, Degree of protection (IP)=IP20, Ambient temperature during operating=-40..70 °C, Connectable conductor cross section multi-wired=0,75..35 mm², Connectable conductor cross section solid-core=0,75..35 mm²
... more
Depth 70 mm
Release characteristic D
Number of poles (total) 2
Number of secured poles 2
Rated current 25 A
Rated voltage 400V
Rated insulation voltage Ui 440V
Rated impulse withstand voltage Uimp 4 kV
Voltage AC
Frequency 50 Hz
Limiting class 3
Flush mounting no
Coupling neutral conductor no
Overvoltage category 3
Pollution degree 3
Additional equipment possible yes
Width in division units 2
IP protection) IP20
Explosion protection no

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Circuit breaker D25A,2pol,T=70.10kA 5SY4225-8"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.