The following 7500 products have been found matching your search "Single":

Item/s (7500)

Categories | Others (10)

Found in shop categories: 10

Single beam light barrier - In this eibabo® catalogue Sensors > Single beam light curtain you will find items from the following product groups:Item overview:Garage door operatorGate drivePhotoelectric barrierSafety accessoriesSafety device single-beam photocellSafety-oriented single-beam photocellSingle beam light curtainSingle-beam photocellfrom the following manufacturers:Manufacturer overview catalogue Single beam light barrier:LeuzeRademacherSomfy

Accessories mechanical lights - Luminaires and recessed spotlights are used in almost every house. However, accessories are often required for their installation. If you also need spacers, suspensions or mounting brackets, you will find them in this catalogue. Read more here about the numerous components that often make the small difference when installing lights and spotlights.The right lighting can really bring a room to life. Whether it is a single lamp or an entire system, the installation of luminaires always involves a certain amount of effort. To ensure that the lighting is a pleasure for a long time to come, you should pay attention to the right accessories when installing the lights. Before you can start installing the lights themselves, you usually have to drill the necessary holes and lay the electrical cables. Once these preparations are complete, you can quickly proceed with attaching the lights or spotlights. But often the first questions arise at this point or small problems arise.Do I have hooks to attach the lamp?Are the hooks suitable for my wall and ceiling?Do I have to pay attention to the construction behind the wall or ceiling?How do I fix recessed lights in a brick wall?Do I have to take precautions to protect against contact?Do I need additional cover caps or couplings for a rail system or light strips?Do I have the required ground spike or ground socket for my outdoor light?Questions upon questions, which can vary greatly depending on the environment and the type of lighting to be installed. This also results in a huge assortment of different small parts, with which all possible difficulties should be solved. In this catalog we have grouped numerous accessories which:can be used universally for individual lightingare available in addition to the most common lighting systems from well-known manufacturers NoticePlease pay particular attention to the manufacturer's instructions for the mounting profiles, retaining clips, blind covers, end caps, built-in springs or connecting elements.This ensures that the respective item fits your existing system.Which lighting accessories can I find in this catalogue?Our range in this shop category is extensive and the items are very different. For your orientation, the individual components can be divided into three product groups:Fixing accessoriesThis is used to attach the lights to the ceiling or wall. This includes items such as wall brackets, ceiling hooks, wall hooks or ceiling spacers. Outdoor lighting is fixed with ground spikes or ground sleeves.Accessories for installationThis accessory is needed to properly install the light. It includes cable glands, junction boxes, plaster housings or installation frames.Accessories for the lightsItems of this type are special add-on parts or supplements for manufacturer-specific systems. These include profile rails, retaining springs, end caps, blind covers, couplings, swivel brackets, wire protection baskets, table clamps or busbar supports. TIP:Take advantage of our huge range of lighting. You are sure to find the right lighting for your home, office or production facility among tens of thousands of items. Other accessories for lights also include wiring, cores and conventional light sources or LEDs. For a better overview, we offer you these product groups in separate categories.What are flush-mount housings?Plaster housings are boxes made of metal or plastic that are embedded in solid walls. Installation is carried out by opening the wall in the height, width and depth of the box. The plaster housing is usually fixed with plaster and the wall is then plastered. You get an installation area for the flush mounting of various recessed wall lights including cable feed. Similar housings are also offered for mounting in drywall.What do I need ceiling junction boxes for?Ceiling distribution boxes are used to accommodate screw terminals or plug-in terminals and thus for the distribution of power lines. They are typically stable plastic housings that are flush-mounted or surface-mounted. These components can also be found under the name 'canopy'.For which lights do I use spacers?Spacers are installation aids for recessed spotlights that are used in drywall. You can buy these components in different diameters and heights. Spacers are clamped into the installation openings before installing the recessed spotlights. This creates a safety distance between the radiator, vapor barrier film and/or insulation material and avoids the risk of fire due to heat build-up.Picture: EVN EPK P21 metal plaster potWhen is the use of a wire protection cage necessary?Wire guards protect both people and the luminaire. These wire grids are mounted directly on the lighting and prevent accidental touching of the possibly hot bulb. On the other hand, the illuminant is also protected from impacts and other mechanical influences.Why should I use cable glands?Cable glands are important components in cable management. This allows cables and lines to be inserted into the housing, distribution boxes or terminal compartments of the lights. These protect:the internal cable connections from moisture, dust and other dirtthe cables at the grommet opening from kinking and twisting What happens if I ordered the wrong accessories?The eibabo® technology store is a leading specialist center for electrical installations and lighting. We ship worldwide and offer secure payment methods. Our customer service also includes accommodating complaints processing. If an item you have ordered does not meet your expectations, you always have the option of returning it. To do this, contact us personally or send your written revocation within the applicable deadlines via one of the specified contact channels. Catalogue content:In this eibabo® catalogue Accessories for lighting > Mechanical accessories for luminaires you will find items from the following product groups:Item overview:Aluminum railCable holderClamping pieceCooling profileCover ringFastening profileFluorescent lampHall lightingHotel lightingInterior lightsJoint coverageLight controlLuminaire fastenerMounting accessoriesMountsOffice lightOptical glassPaint rollerPlaster railPlastic cuffShadow gapShrink tubingSurface mountingTrack spotlightWall baseWarehouse lightingWaterproofWire suspensionsfrom the following manufacturers:Manufacturer overview catalogue Accessories mechanical lights:AbalightABNAlbert LeuchtenAura LightBachmannBarthelmeBrumbergBöhmerErcoEricoESYLUXGiraGrotheHellermann TytonHoubeniiMJungKleinhuisKrüger-WerkeLedlenserLEDVANCELeipzigerLichtlineLTSOligoOpple LightingPerformance in LightPhilips LichtPhoenixPollmannRidi-LeuchtenRP-TechnikSchmitz-LeuchtenSchnepelSchuchSitecoSLVSonluxStahlSteinelThebenTriluxTrio-LeuchtenVitramoWibreWihaWitte + SutorZumtobelZumtobel GroupZweibrüder

Push button - Experience the extensive product selection of our switch programs and find your product from the button and momentary switch area here. Read on and learn more about the different types of buttons, their functions and areas of application. This eibabo® catalog mainly contains buttons for classic domestic use. These are either styli or complete devices for wall installation and wall mounting. The different types include single and double buttons and rocker buttons, rotary buttons, manual release buttons, key buttons and key switches, series buttons and pull-cord switches. Another product group are the pushbutton switches / rocker switches.Are you looking for pushbutton sensors, pushbuttons for industrial applications (e.g. on machines or in consoles) or pushbuttons for use in control cabinets? For this we offer you separate categories with a huge selection. Please use our powerful search.Image: Jung 531-41 U Multi-Switch double buttonWhat is the difference between a button, a switch and a tactile switch?Switching processes accompany us every day. This begins early in the morning when the alarm clock is switched off and the light is switched on. As a rule, we don't worry about how the technology behind each shift works. Typically, these are devices in which a mechanism ensures that a circuit is closed or opened. However, if we take a closer look at the type of circuit, clear differences become apparent.The deskThe classic, simple switching process (e.g. at the light switch) consists of two states - ON and OFF. A conductive connection is made or broken between two contacts. We operate the rocker switch, a circuit closes and the light shines. We operate the other side of the paddle switch, the circuit is broken and the light goes out. The shift paddle remains in the corresponding position with every shift. As a result, the respective switching status ON or OFF remains until the rocker switch is pressed into the other position.The buttonThe basic function of the button is slightly different. A button does not switch, but closes the circuit via a pressure pulse. The functional principle corresponds to that of a switch. Here, too, a conductive connection is established between two contacts by actuating a rocker or a push button. The current flows and the lamp lights up or a bell rings. Unlike the switch, the circuit is immediately broken again when the pressure pulse ends. The rocker or pushbutton is returned to its original position by a spring mechanism. Other types of styli work in the opposite way. The circuit is separated by the pressure pulse and then closed again. An application example for this are electromagnets on the door opener. Switching scenarios can also be implemented via these pressure pulses by using additional relays. You know this from lighting in stairwells, for example.The tactile switchA tactile switch is a combination of a button and a switch. Such a device is similar to a switch in terms of the switching function and a button in terms of operation. A rocker switch or push button closes the circuit when pressed and then returns to the starting position. Unlike the button, however, the circuit remains closed until another pressure pulse interrupts the circuit. So it is the mechanism that distinguishes the pushbutton switch from the switch.Perfect opticsThe rockers of pushbutton switches arranged next to each other are always in the same position relative to each other, regardless of the current switching status.This results in an always uniform and orderly view. Unlike pushbuttons, relay switching with pushbutton switches is not possible. As a rule, there is no significant optical difference between switches, buttons and pushbutton switches from the same switch range. Especially when it comes to rockers, tilting controls, sliding elements or rotary handles.What are normally open, normally closed and changeover contacts?Buttons are available as openers, closers and changers. In most cases, a button is used as a closer. The connected circuit is closed with a pressure pulse. As already described, this state only lasts as long as the button is pressed. The closer works in the opposite direction. In a basically closed circuit, pressing a button breaks the circuit. As you probably already suspected, a changer can take over both functions. You will surely wonder if this is not a switch. And you are right. A changeover contact corresponds to the pushbutton switch described above.What is a key switch?Key buttons are classic buttons, but they do not have manual controls. Instead, a suitable key is required. Turning the key in the lock changes the switching status. For example, turning the key will open a roller door for as long as it is held in the OPEN position. The roller door stops when the key returns to the zero position. However, such devices are usually designed as pushbutton switches / changeover switches. In these cases, turning and holding the key in the other direction closes the roller door.How do I recognize the switching status of pushbutton switches?Simply designed pushbutton switches can leave you in the dark about which switch position is currently applied. However, most pushbutton switches have a small indicator light that signals the active status.Are all button inserts compatible with all switch ranges?You can buy buttons from us for the most popular switch programs from all relevant manufacturers. These include Berker, Busch-Jaeger, Siemens, Jung, Gira, Elso, Merten, Hekatron, Sommer, Rademacher as well as von Peha, Hager and WindowMaster. We carry both flush-mounted devices and surface-mounted versions.Please note that every manufacturer offers both button inserts for installation in the switch box and complete devices for flush-mounting and surface-mounting. If you decide to buy button inserts, please make sure they are compatible with the switch range you want. TIP:Choose pushbutton inserts and switches from the same manufacturer and from the same series. Cross-series or cross-manufacturer compatibility is not guaranteed, especially for switch ranges with a very individual design. We recommend first choosing a switch range that corresponds to your visual ideas. After that, the search for the right switches and buttons is easier.Can I also carry out KNX controls with a normal button?In this catalog you will receive buttons without a network connection. With a network-capable KNX button, you can operate the end devices integrated in your smart home network. This can be:the blinds, which let you move up and downthe light that you switch and dimthe heating you controlthe doors you open and closecompletely individual, user-defined scenarios It is generally operated using a different number of buttons or rocker switches on the device and/or via displays. KNX buttons specially made for this are more complex than the buttons without network connection offered in this catalogue. This extends to controls with an elegant touch display. Temperature sensors, LED displays and backlights are often already part of a unit. In addition, it is often possible to provide each key with additional functions, which are triggered, for example, by long pressing, double-clicking or even triple-clicking. A corresponding interface is required for communication with your building automation. With some KNX buttons, the so-called bus coupling is already integrated, with others you have to install it additionally and plug in the button. TIP:Using a KNX universal button interface, you can make simple buttons network-capable. With a KNX universal button interface, however, you can basically turn any conventional button into a KNX button. These interfaces are installed in a deep device box behind the conventional button and take on the task of a binary input. This converts the analogue, mechanical switching processes into KNX signals. But this solution is more for:simple standard applications such as switching lightsthe modernization of analogue existing installationsinexpensive and functionally manageable system extensions Complex parameterizations are not possible with these simple buttons. If you want this, the KNX push-button sensors designed for this are the better choice. Catalogue content:In this eibabo® catalogue Domestic switching devices > Push-switch button you will find items from the following product groups:Item overview:Branch officeButton buttonsCard switchDouble buttonDouble button series buttonDouble toggle switchFire alarmGroup buttonInstallation buttonInternal buttonManual releaseManual release buttonNostalgia switchPanic buttonParallel buttonPush buttonPush button switchRadio controlReversing buttonRocker switchSignaling contactsSingle buttonTactile elementToggle switchVentilation buttonWireless sensorWireless wall buttonZero clampfrom the following manufacturers:Manufacturer overview catalogue Push button:Assa Abloy effeffBEGA GantenbrinkBerkerBerner TorantriebeBusch JaegerElsoEltakoGiraHagerHekatronHHGIssendorffJungKindermannLegrand BticinoMertenOBOPehaRademacherSiemensSomfySommerWindowMaster

Snap-in clamp - Pressure clamps are small brackets that can be used to fasten single or multiple cables and pipes. These pressure clamps are mostly made of plastic, are available for different diameters and have a special holding system. Basically, such a clamp consists of two parts. On the one hand there is the base, which is attached to the substructure either by means of an adhesive or a screw connection, and on the other hand there is a second part which is snapped or clicked onto the base. The more pressure is exerted, the more the upper part snaps into place and thus creates a firm connection with the cable or pipe. Some clamps can be connected to form rows using a plug-in system. Other models also have a grub screw with which you can also fix the attached cable or pipe. Your eibabo online shop offers you both individual pressure clamps and pressure clamps in different packaging units at reasonable prices.Catalogue content:In this eibabo® catalogue Installation material for cables and tubes > Pressure clamp you will find items from the following product groups:Item overview:Adhesive clampBraceCable bracketCable clampCable spacing clampClampData cableDouble clampFastening clampFixing clipFunctional integrityInsulating tubeIso clampIso grip clampIso pressure clampLine clampPlastic clampPressure clampPressure clipPressure iso clampPressure saddle clampPressure saddle clamp (cables / conduits)Pressure saddle clamp (cables/conduits)Series clampSeries pressure clampSOM clipSpacer clampUniversal clampfrom the following manufacturers:Manufacturer overview catalogue Snap-in clamp:EricoFischer DEKleinhuisOBO

Single-led - In this eibabo® catalogue Lamps > Single LED you will find items from the following product groups:Item overview:BulbsDiodeFestoon lampLampLEDLED diodeLed packageLed-packageLEDsLight Emitting DiodePhone plug lightReflector lampSignal lampSignal lightSingle LEDfrom the following manufacturers:Manufacturer overview catalogue Single-led:ABBBarthelmeEaoEatonHagerNovar AckermannScharnberger+Has.Schneider ElectricSiemens

Socket board - How many consumers can be connected to a socket strip? How do you integrate the power strips into office furniture? You can find out in this eibabo® catalogue, and find the right product for you from the large selection of socket strips. Socket strips are also referred to as multiple sockets or power strips. These provide a connection to the power grid for several electrical consumers with a standardized plug connection. In contrast, an extension cord usually only has a single connection.Which criteria are important for the purchase of a power strip?A power strip is a relatively simple tool for expanding the electrical installation. Nevertheless, it is advisable to pay attention to a few basic things. These are:Sufficient number of slotsStable material quality of cable, plug and socketsThe presence of surge protectionSpecification of a test mark such as the GS seal or the VDE sealAn adequate IP rating for the intended useAdditional equipment (switches, child protection and so on) How many devices can be connected to a power strip?In principle, the number plays a subordinate role. It depends on the sum of the power. Please note that under no circumstances should too many powerful consumers be connected to a socket strip. Remember that a device doesn't have to be big to require large amounts of power. You should therefore not connect high-power devices such as refrigerators, washing machines, dryers, space heaters, air conditioners or ovens to a power strip. Small consumers such as lamps, computers, entertainment devices or printers do not pose a problem. TIP:The connected loads should not exceed a combined output of around 2300W at 10A or 3600W at 16A measured at 230V mains voltage. Please make sure that you do not connect multiple socket strips in a row. Otherwise the resistance (impedance) could become too large due to the concatenation.Can socket strips also be sources of danger?As long as you are using a power strip properly, there is nothing to worry about. Pay attention to the performance of the connected devices and to a safe laying of the cable. Never lay a line under a carpet that many people walk over every day. Over time, this can cause the wires in the line to break, heat up, and cause sparks. Check the cable and the power plug of the strip regularly. If you find any damage, replace the power strip.Image: Bachmann 333.400 19 inch power stripWhat types and equipment are possible with socket strips?Combinations of different equipment features are also often available. At eibabo® you can get socket strips with switches and overvoltage protection or master/slave socket strips with switches, among other things. Further explanations would be, for example:Switch, toggle switch or foot switchtimersOvervoltage protectionchild lockMaster/slave power strips Or the following statements:19 inch power stripsALU socket stripsOutdoor sockets and garden sockets or combination plugsDesk boxes and table socketsEnergy cube (SCHUKO or up to 400V CEE)Multiple crafting barsSocket strips for IEC cold devicessocket towerssurge outlets What are the advantages of power strips with surge protection?Power strips with overvoltage protection protect connected devices from damage because voltage peaks are reduced. An upstream coarse protection in the meter cabinet and medium protection in the electrical distribution is also advisable. TIP:We recommend the use of surge protection if you supply valuable technology with the additional sockets. A surge protector has another protective element that absorbs additional current. These can be current fluctuations or voltage peaks, which could otherwise damage or destroy your connected electronics.What are master/slave power strips?Power can be saved with master/slave socket strips. An integrated electronic circuit detects whether power is flowing through the master socket. If power is present at the master socket, the slave sockets are activated. If no more current flows through the master socket, the slave sockets switch off. The typical application is a computer and its connected peripheral devices. If the computer is switched on via the master socket, monitors, scanners and printers also start. Turning off the computer also disables all other devices, avoiding going into sleep mode.What do I use 19 inch power strips for?19 inches is a standard installation size for server cabinets. If you want to install many devices in your server cabinet, you need an adequate power supply. With a 19-inch socket strip, up to 10 devices can be connected. The socket strip is adapted to the profile rail of the 19-inch server cabinet and can be mounted directly.We recommendIn order to set up additional protection, we also recommend an uninterruptible power supply (UPS) in addition to integrated overvoltage protection.You can also get high-quality UPS systems in the eibabo® shop. Use our intelligent search.What options do I have for permanent installation of power strips?You need electricity at practically every workplace. With socket strips for mounting on, under or in a desk, you can create connection points for monitors, printers, beamers and telephones. So you don't have to crawl under the desk every time you want to connect something. In addition, the connections don't get dusty as quickly because they are easy to access for cleaning or are integrated into a housing. In addition to the desired number of power connections, other interfaces (USB, HDMI and others) are often available. In addition to mounting on or under the tabletop, it is sometimes possible to retrofit it by drilling or cutting out the tabletop.With socket units you remain flexible. These are housings that you can individually equip with suitable inserts. This is how you put together the perfect supply bar yourself. Catalogue content:In this eibabo® catalogue Domestic switching devices > Multiple socket you will find items from the following product groups:Item overview:Artisan tinComputer power stripConnection accessoriesDouble socketEnergy measurementFranceGarden socketGround spike socketMains interference filterMonitoringNetwork cabinetsNetwork connectivityNetwork interfaceNine-way socketOvervoltage protectionPlug-in modulePower distributionPower stripsPower supplyRedundancy moduleRetrofitSchuko socketSocket caseSocket coverSurge protection deviceSurge protection moduleTable socketTable socketsfrom the following manufacturers:Manufacturer overview catalogue Socket board:BachmannBrennenstuhlDehnE+P ElektrikEatonEaton USVEgloEnocHamaHartingJungKindermannLegrand BticinoOBOPentairPollmannRittalSchneider Elec.(APC)Schneider ElectricSchäfer IT-SystemsTehalitVertiv

Connection box - copper - In the field of data communications technology, you will find a wide range of junction boxes at eibabo®. In this catalog we offer you devices for signal transmission with copper cables. Here you can read interesting facts about the use of the well-known RJ plug connections and their origin. These proven junction boxes for data technology offer you maximum flexibility, reliability and ease of installation.We carry modular and compact junction boxes in different performance classes for:flush mountingsurface mountingMounting on the DIN rail or for duct installation In connection sockets, a distinction is usually made between single sockets and double sockets. In addition to the variants for copper cables, you will find connection sockets for fiber optic cables in other categories of our shop. Matching keystone modules are also available for almost every connection. Our range includes products of the highest quality, which also meet high demands or industrial use.Image: Rutenbeck UAE-ClassEAiso8/8Up0 UAE junction boxJunction boxes with connector types from the RJ seriesRJ plug connections are mainly used to create network connections. The 'Registered Jack' connectors are standardized network interfaces with a defined design for plugs, sockets and their circuits. These are used to connect telecommunication devices. The most well-known standards include RJ-11, RJ-12, RJ-45 and others. The contacts inside are in the form of blades which, when crimped with a special tool, cut through the conductor's insulation and create a conductive connection. The connectors are usually made of transparent plastic so that the assignment of the contacts can be seen.The crimpingYou can obtain special crimping tools for assembling connectors from the RJ series here in the shop. There are universal crimping tools that you can use to crimp all types of RJ plugs. There are also crimping tools that are only suitable for certain connector types.The Registered Jack Standard was originally developed and patented by Bell Laboratories in 1975. This should standardize the connectors used and simplify the work of connecting end devices. Thanks to the support of the US Federal Communications Agency, these were quickly established as the standard for connecting subscribers to telephone networks.Which RJ connectors are the most common?In order to better understand the designation of the plugs and sockets, you should know their structure. The plugs and sockets have a specific number of contact positions. Depending on the model, this can be four, six, eight or ten pieces. However, a contact does not have to be installed at every contact position. This results in the plug designation or the socket designation. Some examples:A 4P4C connector has four contact positions, all four of which are occupied by contacts.A 6P2C connector has six contact positions, only two of which are occupied by contacts.An 8P8C connector has eight contact positions, all eight of which are occupied by contacts. The RJ-9 connector (4P4C) is mainly used to connect telephone handsets to telephone sets. These are the smallest connectors in the RJ series. These have four contact positions and four contacts.RJ-11 connectors are used to connect the phone cords from landline phones. There are two types of RJ-11 connectors: two-pin as 6P2C and four-pin as 6P4C.RJ-12 connectors are similar to RJ-25 connections. These have six positions and six contacts (6P6C) and are primarily used to connect proprietary telephones with a six pin connector.The RJ-45 connectors are very common. These have eight occupied contact positions (8P8C) and are designed for the connection of telecommunication devices. You will find them on computers, network connection sockets, network switches or patch panels. Depending on the cable used, these plugs differ in the shape of the cutting blades:Blades for single core twisted pair cables where the conductors consist of only one solid conductive coreBlades for multi-core twisted pair cables, where the conductors consist of several conductors (strands) braided togetherTriple blades for both types of twisted pair cables Externally, the RJ-45 connectors for different cables do not differ. The difference lies in the position of the contact blades that cut through the cable insulation. Shielded RJ-45 connectors are used with a shielded twisted pair FTP cable for protection against interference and radio interference. You will receive suitable junction boxes for this, which also offer shielding. TIP:There are rubber caps with different color markings for some RJ plugs. These enable better assignment and prevent kinking and damage to the cable at the connector input. 10P10C plugs and sockets are referred to as RJ-50. These have ten occupied contact positions and are used to control uninterruptible power supplies, barcode scanners and medical devices.What are keystone junction boxes?Keystone is a modular insert for passive network devices such as junction boxes or patch panels. These inserts fulfill the function of ports to which, among other things, RJ plugs can be connected. You will receive Keystone junction boxes, which form the framework for using your Keystone modules. All Keystone modules have a set shape and two sides for connecting wires and/or connectors. Depending on the type of connections, the models are divided into 3 types:Unchangeable ? there are identical connectors on both sidesVariable ? with different connectionsSocket ? the most common, on the front side there is a socket for inserting a plug (for example RJ-45), and on the back side there is a connector with insulation displacement terminals for fastening an uncrimped cable. What does the specification of the category mean for a junction box?If you want to buy a junction box and look at the characteristics of the devices, you often come across the indication of a category. This information is an indication of the possible speed of data transmission. Just like the connection sockets, your network cables are also classified into different categories.The CAT-5 standard offers a transmission speed of up to 100 Mbit/s.The CAT-5e standard offers ten times faster speeds of up to 1000 Mbit/s or 1 Gbit/s.Networks based on the CAT-6 standard and associated hardware support 10 Gbit/s. The specification 6A designates the further development of this standard with an increased transmission frequency. Please match the rating of the junction box to the rating of your connection and the type of cable you are running. Catalogue content:In this eibabo® catalogue Data and telecommunication > Data communication connection box copper (twisted pair) you will find items from the following product groups:Item overview:Cable connectorCentral plateChannel socketCommunication junction boxCommunication socketCommunication technologyConnection module carrierConnection unitData connector housingData couplingData socketDevice cupDevice socketDouble frameFlush-mounted boxInsulation displacement connectionJunction boxLocal loopModule carrierMounting frameNetwork socketRaised floorRecording moduleScrew connectionScrew terminalSupport plateTelecommunicationsUnderfloor boxfrom the following manufacturers:Manufacturer overview catalogue Connection box - copper:3MABLBerkerBrand-RexBusch JaegerCommScope EMEACommScope/AMP NetconnCorningDätwylerEFB-ElektronikElsoGiraHagerHartingLeoni DatacomLumberg ConnectMennekesMertenMetzMurrelektronikOBOPanduitReichle & De-MassariRutenbeckSetecSiemensTehalitTelegärtnerWAGOWeidmüller

Toaster - Toasters come in many varieties. The choice for or against a particular model depends on the needs you have for toasting bread. For a single household, a compact one-slice toaster may be sufficient. Two-slot toasters make more sense for couples, and families should go for larger ones that can toast four or more slices of toast at once. You should also pay attention to the length of the slits. If you would like to toast black bread or farmhouse bread from time to time, we recommend a long-slot toaster from the eibabo online shop. Most models also have a bun attachment. With it you can easily give rolls, bagels and croissants the desired bite. This is usually very quick and you save electricity because the large oven does not have to be turned on. The sandwich toasters, which are constructed similar to waffle irons, are a special form. This means that toasted and folded toast slices can be browned from above and below at the same time while the topping heats up or melts.Catalogue content:In this eibabo® catalogue Small domestic appliances > Toaster you will find items from the following product groups:Item overview:2-slice toaster4 slice toaster4-slice toasterBread roll warmerBun bakerBun toasterCold wall toasterCompact toasterElectronic toasterKitchen utensilLong slot toasterMini toasterReversible toasterRoll bakerRotating toasterSandwich makerSandwich toasterSoft lift toasterToast machineToasterToaster/mini ovenToaster/sandwich makerToaster/sandwich toasterToasterSandwich ToasterTwo slot toasterWaffle makerfrom the following manufacturers:Manufacturer overview catalogue Toaster:Beko Grundig SDABomannBomann DABosch HausgeräteBosch SDABraun HausgeräteBraun SDACloerFakir SDAGraefGrundig SDAKrupsMoulinexOmegaPrincessRommelsbacherRowentaRussel HobbsSeverinStebaTefalUnoldVarta Cons.Russell

Emergency stop button - compl. - With the exception of hand-operated and hand-portable machines, it must be possible for bystanders to stop any other machine immediately with a single action as soon as danger is imminent. Such a possibility must also be guaranteed if people are random and not familiar with the function of the machine. This is regulated in DIN EN ISO 13850. In general, this scenario is ensured via an emergency stop function or an emergency stop button. With high-quality emergency stop button complete devices from your eibabo online shop, you comply with the legal provisions and protect your employees against accidents and injuries. All of the complete devices offered here comply with the legal regulations with regard to color coding and operation, are reliable, robust and can be secured with a key, depending on the model, if required.Catalogue content:In this eibabo® catalogue Low-voltage industrial components > Emergency stop complete you will find items from the following product groups:Item overview:Command deviceComplete deviceControl unitEmergency stopEmergency stop buttonEmergency stop button, complete deviceEmergency stop completeEmergency stop switchEmergency switchIlluminated pushbuttonIndicator lightMushroomMushroom buttonMushroom pushbuttonMushroom switchPush buttonPushbuttonSelector switchSignaling deviceSlam switchSponge button combinationfrom the following manufacturers:Manufacturer overview catalogue Emergency stop button - compl.:ABBBerkerCeagEatonIfm ElectronicLegrand BticinoPilzRafiRockwellSchlegelSchneider ElectricSiemensStahl