The following 7500 products have been found matching your search "Siemens":

Item/s (7500)

Categories | Others (10)

Found in manufacturer pages: 7

Siemens - Use Siemens Industry services and products to secure the lasting success of your company. The industry division of the Siemens Group (Siemens Industry) offers a comprehensive portfolio of services and products, enabling companies and consumers alike to secure a decisive competitive edge or gain an advantage through innovation. Ever increasing demands require maximum productivity and efficiency when it comes to the operation of industrial plants. At eibmarkt®, you will find a wide range of relevant items from Siemens in our eibabo® stores. For example, Gamma building control from SIEMENS Industry offers solutions for future-proof electrical installations. Buildings equipped with Gamma building control are energy efficient, cost-effective and can be adapted to your specific user requirements. Siemens KNX® power supplies, bus coupling units, KNX® IP interfaces and routers, plus KNX® outdoor motion detectors and KNX® switch actuators are particularly popular products at eibabo®. The lighting, sunlight protection, and indoor climate of buildings can be controlled in an energy-saving, user-friendly way by means of KNX®. Siemens offers cost-effective solutions for low-voltage switchgear: not only can they be integrated into control cabinets, distribution boards or distributed systems, they also communicate perfectly with one another. Highlights also include Siemens classic, best-selling solutions in the LOGO series for conventional applications, which can also be integrated into KNX® automation applications using the LOGO KNX® communication module. Siemens expertise in automation technology will also contribute significantly to the continuous optimization of your processes. With over 7,000 items from Siemens, eibabo® offers a huge range of products to choose from. Over 2,000 Siemens items can be ordered via the eibabo® electrical material main catalogs under PLC control systems, electrical distribution installation, residual current circuit breakers, low-voltage switching devices or in the smart home mains catalog under switch actuator, with fast delivery worldwide.

Found in shop categories: 3

Through terminal - Which feed-through terminals should you use for your control cabinet? Are terminal blocks the same as feed-through blocks? Find out here what the differences are between feed-through terminals and what they are used for. In the eibabo® technology store you can get feed-through terminal blocks from all well-known manufacturers such as ABB, Eaton, Eberle, Hager, Metz, Phoenix, Schneider Electric, Siemens, Spelsberg, TE Connectivity, WAGO, Weidmüller, Wieland and Wöhner at great prices and in large quantities. We deliver our range worldwide.Feed-through terminals fulfill several functions and are among the most important components within a control cabinet. It is mounted on the DIN rail. Feed-through terminals are connecting elements between the incoming cables and lines of an installation and the actual control cabinet installation.What is the difference between feed-through terminals and terminal blocks?Feed-through terminals are terminal blocks. 'Terminal block' is a generic term that also includes other types of terminals. These include, for example, fuse terminals and relay terminals. Other terms describe the way a terminal is constructed or its ability to connect the conductors. In these contexts, one often hears about one-tier terminals, three-tier terminals, spring-loaded terminals, push-in terminals or screw terminals. We would like to briefly discuss some of these types in the following sections.Why are feed-through terminals indispensable components in the control cabinet?Feed-through terminals offer the necessary flexibility in the control cabinet to connect rigid incoming cables and lines to the relevant fuses, actuators or other devices. A direct connection without feed-through terminals does not make sense. A clear installation would not be possible. First, the cables and lines are clearly laid out on the terminal blocks. They then lead them from there to the devices in the control cabinet. As a result, the entire installation remains flexible because there are connection points and nodes for checking and changing the system structure.Image: Phoenix PT 2.5-3L feed-through terminalEach connection that is made takes on a function previously defined in the circuit diagram. The installation of the system and the function of individual connections remains traceable. This makes later additions, repairs and maintenance easier. If you want to make changes, these can be done by reconnecting individual wires. The rigid supply lines remain unaffected.And there are other advantages: For example, you can only connect two wires to many modular installation devices. The feed-through terminal blocks offer further advantages here. An example: A fuse is intended to protect several lines. However, you can only connect the cores of one line. In order to also integrate the other lines, you can create clear bridge connections on the feed-through terminals. The electrician can also carry out insulation measurements and other control work directly on the terminal blocks. Troubleshooting is made much easier and faster.What different feed-through terminals are there?Each manufacturer builds the feed-through terminals slightly differently. However, the principle is the same. There are single-level terminals and multi-level terminals. While you can only connect one line in the single-level terminal, several incoming and outgoing lines can be installed in multi-level terminals. Use a three-tier terminal for a three-wire cable. The is designed for connecting the protective conductor, the L conductor and the N conductor. This arrangement saves an enormous amount of space in the control cabinet. Three-tier terminals are mainly found in the control cabinets of private households and in smart home installations. TIP:On some models, the protective conductor has no connection point for the outgoing line. The protective earth contact is made directly by the clamp connection with the DIN rail. Another feature that distinguishes feed-through terminals is the way the wires are fastened. The screw terminal fixes the respective wire with a screw connection. This method takes a comparatively long time, especially when the plant is complex. A spring-loaded terminal makes electrical contact with a mechanical spring. This consists of a bent, flat copper contact. The wire must be inserted through a hole in the copper contact. This is only possible if the contact is clamped with a pointed tool. When the clamping tool is removed, the spring pulls back and the wire is jammed. The connection is released in the same way. The push-in connection is another fastening variant, similar to the spring-loaded terminal. Here, too, a spring presses against the wire. In contrast to the spring-cage connection, installation is tool-free and therefore even faster. The wire is inserted into the spring shaft of the feed-through terminal and the spring locks automatically. If you want to loosen the connection, you need a pointed tool. A small screwdriver is usually sufficient, which bends the retaining spring to the side and loosens the wire. This method saves a lot of time with cores with solid conductors. Wires with flexible conductors can also be attached using wire end sleeves using this method.Solid and flexible veinsYou can connect cables with solid cores and flexible strands in feed-through terminals. Both variants and combinations are permitted. Flexible cores can easily fan out. The use of ferrules makes handling easier with spring connections.The attachment of the wire using cutting terminals is rather rare. Use this variant if your veins are particularly thin. Here, the contact is made through a small cut in the insulation.Depending on the function and area of application, cables and wires with different cross-sections are used in the electrical installation. This affects the feed-through terminals. Appropriate feed-through terminals are available for all common cable cross-sections. Whether a clamp can be used for a specific cross-section is indicated on the clamp. It is usually possible to bridge the L conductor and the N conductor using several feed-through terminals, sometimes on several levels. Suitable cable bridges are available here in the shop.markLabeling the lines helps with orientation, especially when a new employee or another electrical company takes over the system. Some terminals have labeling fields. We recommend using this option and labeling all devices and connections in a meaningful way.The design of the neutral conductor contact is another distinguishing feature. In addition to models for classic wiring, there are feed-through terminals with which an N busbar can be used. The neutral contact on these terminals is designed accordingly so that the connection can be made with one hand. When using a busbar, you need an additional terminal for feeding. To securely fix the rail, use suitable support blocks or the fastening levers on the end clamps at the beginning and end of the row. Longer rails are additionally fixed every 20 cm. To be able to use cables with five cores, use multi-level terminals to connect the outer conductors.How to use feed-through terminals in the KNX area?In addition to the classic feed-through terminals, you can get special terminal blocks for low-voltage or KNX use. These have a different color and can therefore immediately be distinguished from other terminal blocks. This also contributes to order and clarity in the control cabinet. In terms of function, these terminal blocks hardly differ from conventional terminal blocks. You can connect cables with a cross-section of up to 1.5 mm2 to these terminals.Why are feed-through terminals not closed on one side?The available space in the control cabinet is specified in modular widths (HP). These provide information about the capacity of a control cabinet. Feed-through terminals are not manufactured according to this pitch, but as narrow as possible. The narrower a terminal, the more terminals can be installed on a specific area of the DIN rail. Good to know:Feed-through terminals are not closed on one side. The missing cover saves a little space. In relation to the length of a top-hat rail, more terminals can be mounted. Since feed-through terminals are mounted directly next to each other on the DIN rail, there is no danger of touching the contacts on the open sides. Without a side cover, a terminal is narrower. A cover is only attached to the last terminal in a row.Which installation aids and which accessories are available for feed-through terminal blocks?For the construction of a control cabinet, you receive numerous well thought-out components that simplify your work. For feed-through terminals, for example, the cross-bridges and busbars already mentioned are available. In addition, you will receive separator plates and end plates, covers, feeds or end blocks as well as test plugs, fuses, labeling fields and other components.  Catalogue content:In this eibabo® catalogue Terminal blocks > Feed-through terminal block you will find items from the following product groups:Item overview:Base clampBolt clampChangeover relayCompartment clampConnecting combsConnection moduleConnection technologyDistribution blockFeed terminalFour-level clampLightning arrowMarshalling boxMini clampMotor connection terminalMotor output terminalMulti-level clampMulti-wire terminalNeutral terminalPotential clampRelay terminalSocketSpring clampsSpring clipSwitching relayTerminal block connectorThermal voltage terminal blockThrough terminalUniversal clampfrom the following manufacturers:Manufacturer overview catalogue Through terminal:ABBEatonEberleHagerMetzPhoenixSchneider ElectricSiemensSpelsbergTE ConnectivityWAGOWeidmüllerWielandWöhner
Multi-level installation terminal - Which multilevel installation terminals are there and what functions do they have in the control cabinet? Are multi-level installation terminals the same as feed-through terminals? What's the difference? How is the assembly done? Here you will find answers to many questions. In the eibabo® technology store you can get multi-level installation terminals from all well-known manufacturers such as ABB, Hager, Phoenix, Siemens, WAGO, Weidmüller and Wieland at top conditions and in large quantities. Delivery is worldwide, fast and safe.Installation multi-level terminals are among the most important components within a control cabinet and fulfill several functions. The terminals represent connecting elements between the incoming cables and lines of an installation and the actual control cabinet installation. The assembly is carried out on the DIN rail.What are installation multi-level terminals?Installation multi-level terminals are multi-pole terminal blocks. The term 'terminal block' not only includes multi-level installation terminals, but also, for example, feed-through terminals, fuse terminals and relay terminals. Surely you have already heard or read about single-level clamps and triple-level clamps. These are other common names for feed-through terminals and tier terminals. When it comes to spring-loaded terminals, push-in terminals or screw terminals, the focus is on the type of wire attachment. But these terminals can also be counted among the multi-level installation terminals. The main feature of the installation multi-level terminals is the potential entries arranged one above the other.What is the difference to a feed-through terminal?The differences between feed-through terminals and multi-level terminals are small and mainly lie in the number and arrangement of the potential entries. A simple feed-through terminal usually only has one potential, while tier terminals can have several potentials. This saves space compared to feed-through terminals, since the feed-through terminals are arranged next to each other as individual terminals. A clear assignment of the different cores is guaranteed by the colored conductor entry openings in multi-level terminal blocks. Tier terminals are therefore more complex feed-through terminals and are often equipped with special functions for building installation, for example with N disconnect terminals, equipotential bonding terminals or distribution feed terminals.How important are multi-level installation terminals for control cabinet construction?With multi-level installation terminals, you achieve enormous flexibility in control cabinet construction. Rigid incoming cables and lines are clearly laid out on the terminals. You thus create flexible connection points to connect the actuators, fuses or other devices in the control cabinet with individual wires. This keeps the entire installation flexible, as there are nodes for testing and changing the entire system. A direct connection without installation multi-level terminals would not be clear and would lead to considerable effort in the event of changes.Image: WAGO 2003-7641 Multi-level installation terminalWith the implementation of a well-structured circuit diagram, each link created in this way takes on a comprehensible function. The installation of the system remains clear. Additions, repairs and maintenance in the future are made easier. Changes to the system are always possible by reconnecting individual wires. The rigid supply lines remain untouched.For a better overviewYou can attach labeling fields to some tier terminals. We recommend using this. Label all devices and connections sensibly. Matching labeling fields are available here in the shop.But this structure offers other advantages. During maintenance work, the electrician can carry out his insulation measurements and other control work directly on the tier terminals. This saves time and money when troubleshooting. For example, many DIN rail mounted devices (REG) only have two contact points for connecting the cables. With the use of installation clamps, you can expand this if necessary. An example: You want to protect several lines with one fuse. Unfortunately, you can only connect the wires from one line directly to the fuse. What can you do? In order to link further lines, establish clear jumper connections on the installation multi-level terminals.How can the cables be attached to the installation multi-level clamps?Each manufacturer builds the multi-level installation terminal blocks slightly differently. However, the principle is the same. While single-level terminals connect only one line as simple feed-through terminals, the installation of several incoming and outgoing lines is possible in multi-level terminals / tier terminals. A three-tier terminal block is designed for the connection of the protective conductor, the N line and the L line. The arrangement in tiers saves a lot of space in the control cabinet. Multi-level terminal blocks are used very frequently, especially in the smaller switch cabinets in private households and in smart home installations. TIP:If a terminal block does not have a connection point for the outgoing protective conductor, snapping it onto the DIN rail ensures 100 percent contact with the protective conductor contact foot. The types of attachment for the cables represent a special distinguishing feature. There are screw terminals, spring-loaded terminals and push-in terminals.With the screw terminal, a screw fixes the respective wire. This method is comparatively time-consuming, especially when dealing with a large system with many connections. Fastening with a screw must be done carefully so as not to damage the solid or flexible cable too much.With the spring-loaded terminal, the electrical contact is made with a mechanical metal spring. The spring is in the form of a curved flat contact with a hole. The wire must be put through the hole to connect. This is only possible if the spring is stretched with a pointed tool. The line will bind as soon as the tool is removed and the spring relaxes. The connection is released in the same way.The push-in connection is a variant of the spring-loaded terminal. Here, too, a spring-loaded metal contact presses against the wire. Installation is tool-free. The wire is inserted into the spring shaft of the multi-level terminal block and the contact is locked directly by the spring force. You need a tool to loosen the connection. Using a small screwdriver, bend the spring contact to the side and the wire will come loose. These connections save a lot of time with cables with solid conductors. Wires with flexible strands can also be fixed using this method, but they should be stabilized with a ferrule.The attachment of the cores using insulation displacement terminals is rare and is only used if your cable is particularly thin. With this method, the conductive contact is made by cutting the wire insulation.Special features of the neutral conductor contactIn addition to models with screw attachment and spring clamps, there are multi-level terminals where you can use an N busbar. With these terminals, the neutral conductor contact is designed in such a way that a busbar can be connected with a flick of the wrist. In this case you need an additional terminal for feeding. To ensure that the rail is held securely, use suitable trestles at the beginning and end of the row. Some clamps also offer mounting levers. Please also fix longer rails every 20 centimetres.Are there different tier terminals for the different cable cross-sections?Cables and lines with different cross-sections are used in electrical installations. This affects the tier terminals. Appropriate terminals are available for all common cable cross-sections. The suitability for certain cross-sections is indicated on the terminals. In addition, there is the option of bridging the N lines and the L lines via several tier terminals, sometimes on several levels. Suitable cable bridges are available here in the shop.Why are multi-level installation terminals open on one side?As you may know, the space available in the control cabinet is specified in modular widths (TE). The specification of the pitch units provides information about the capacity of a control cabinet and helps with the purchase decision. Installation multi-level terminals do not correspond to this grid dimension, but are manufactured as narrow as possible. So the narrower the individual terminal is, the more terminals you can install on a certain area of the DIN rail. Good to know:A pitch unit is 18 millimeters according to DIN 43880:1988-12. The installation width of the devices is 17.5 millimeters (deviation plus 0.5 millimeters) and its multiples. Installation multi-level terminals are typically mounted directly next to each other on the mounting rail. There is therefore no risk of touching the contacts on the open sides. This saves material in production and some space. Without a side cover, a terminal is slightly narrower. Only the last terminal in a row is covered.What are N disconnect terminals?Electrical systems must be checked regularly. The insulation measurement (e.g. between neutral conductor and protective conductor) is an essential part of such a test. As a result, possible insulation faults, which can cause fires and the associated damage to persons or property, are detected at an early stage. To do this, the neutral wire of each circuit must be disconnected. The use of neutral conductor disconnect terminals is therefore necessary in this country in public facilities, workplaces in trade and industry and in fire-endangered premises.  Catalogue content:In this eibabo® catalogue Terminal blocks > Multi level installation terminal block you will find items from the following product groups:Item overview:Cage clampDouble clampFeed blockFeed-through terminal blockFuse plugGround terminalInsta clampInstallation clampMulti-level clampPhase terminal blockSingle clampSpring clampSpring clipSpring terminalTerminal blockThree-wire terminalTier clampTripod clampUniversal clampfrom the following manufacturers:Manufacturer overview catalogue Multi-level installation terminal:ABBHagerPhoenixSiemensWAGOWeidmüllerWieland
Dimming actuator - The technical requirements for the use of dimming actuators are very extensive. Why do I need a dimming actuator and which dimming actuator is the right one for me? In this eibabo catalog you will find many dimming actuators from different manufacturers, for example from the top brands ABB, Berker, Busch-Jaeger, Eaton, EVN, Gira, Hager, Issendorf, Jung, Lingg & Janke, MDT, Merten, Siemens and Theben various automation systems or conventional applications.How do I plan the lighting correctly?You should not start with the control technology first, because this follows at the very end of the lighting planning. First you should plan the lighting according to necessity, appearance, ambience and your own wishes, followed by the functional requirements and then find the right lights.Save by planning!The more precise, the cheaper the execution of the installations. The more complex the functional requirements are, the more important it is to plan and research a suitable SmartHome system.Only then is the functional implementation carried out, which consists of many other topics.What should I know beforehand?Which lights do I want to install?Do I want to use a conventional installation or a bus system?Should the SmartHome be wired or radio (KNX, DALI, or Zigbee radio protocols such as Hue)?Which lights are switched and/or dimmed together and how?Should it be controlled via app or voice assistant?and much more... ... this results in the following findings, for example:Which cables and lines are required?Which control components (e.g. dimming actuators) have to be considered?To what extent do the operating resources have to be secured?How much space must be provided in the electrical distribution?Do I have to consider special flush-mounted sockets for lights?and much more... What do I have to consider before buying a dimming actuator?Before you buy a KNX dimming actuator, the load types of the equipment and their performance should be checked carefully. There are basically 3 types of KNX dimming actuators. There are dimming actuators with the control type leading edge, trailing edge or universal dimming actuators that recognize the connected load type and automatically activate the correct type of control. TIP:Install a few more lights in the room and use a dimming actuator to create a pleasant lighting ambience. KNX dimming actuators are available for installation in the electrical distribution system, then they have the suffix 'REG' for modular installation devices or as a concealed version 'UP' for installation in a mounting box or junction box or as an installation version 'EB' for integration in ducts or similar. 230V halogen lamps or incandescent lamps, for example, can be operated with both types of control.What is the difference between leading edge dimming and trailing edge dimming?Very simply explained; 12V low-voltage lighting (NV) with a conventional iron-core transformer requires phase control dimming, although these transformers are hardly ever used. 12V low-voltage lighting (NV) with an electronic transformer requires trailing edge dimming.The type of dimming of the dimming actuator can be recognized by the abbreviation 'RL' for trailing edge dimming for incandescent lamps, 230 volt halogen lamps and the abbreviation 'RC' for trailing edge dimming for incandescent lamps, 230V high-voltage halogen lamps, 12V low-voltage halogen lamps, dimmable LEDs and dimmable ones energy-saving lamps. It is also possible that both abbreviations 'RC' and 'RL' can be found printed on the dimming actuator. Often you will also find this imprint: 'R, L, C'. It designates which equipment the dimming actuator can work with (dimmer, transformer, LED). If you find all 3 letters or the abbreviations 'RL' and 'RC', then it is usually a universal dimming actuator.Image: KNX LED universal dimming actuator - Jung 390041SRIn this case, however, the limit values of the power ranges for each type of dimming with connected equipment must be observed. Dimming actuators often have minimum loads, which may not be suitable for the use of LEDs. Trailing edge dimming 'RC' (trailing edge control) is the most common application. Basically, the lamp and the dimmer must be marked as 'dimmable' and fit together. TIP:For LEDs, we always recommend LED dimmers or LED controllers, which have also been developed for exactly this application. If in doubt, you can also contact the manufacturer of the dimming actuator directly if you send a data sheet for the equipment (lamps and, if applicable, ballasts).Can I dim a fluorescent lamp? Are energy-saving lamps dimmable?Yes, fluorescent lamps and energy-saving lamps can also be dimmed, provided the lamp is suitable and marked as 'dimmable' or, in the case of fluorescent lamps, there is a dimmable electronic ballast (EVG) for 1-10V or the DALI standard. You can find KNX dimming actuators for electronic ballasts with a 1-10V interface under Smart Home > Light control unit. Another standard for electronic ballasts is DALI (Digital Addressable Lighting Interface). The advantage over the 1-10V variant is that addressing is possible and there is no wiring according to groups. Further advantages are direct addressing, status messages, scene memory and a wide range of dimming options with the DALI ECG.How do I find out if my lamp / luminaire is dimmable?Basically, the light source used should first be checked to see whether it is dimmable. You can find this marking in the item description or on the packaging. Lamps that have already been planned and fitted with light sources must be checked for dimmability and the type of control with the control gear used.How do I determine the power for my dimming actuator?It must be clear which light groups are to be switched and dimmed together and how high the total output (W/VA) of the group is in order to select the appropriate KNX dimming actuator with regard to the required maximum output, the minimum load and the number of channels as well as the type of control Find. eibabo always recommends a thorough analysis of the application prior to purchase. Lamps and illuminants must be technically analyzed and checked against the technical data of the dimming actuator. In addition, there are countless different parameter properties of KNX dimming actuators between the manufacturers.Why can't I dim my LED light?All dimming actuators meet the standard requirements for dimming. In addition, many manufacturers offer additional interesting parameters. These parameters may be functionally important for your project. The marking KNX universal dimming actuator does not automatically mean that these dimming actuators are also suitable for dimming the LEDs you use.  Catalogue content:In this eibabo® catalogue Installation bus systems > Dimming actuator for bus system you will find items from the following product groups:Item overview:ActuatorBasic moduleBinary inputBrightness controlBus technologyControl blockControl unitDimmer plugDimming actuatorsDimming extensionDIN railEnergy efficientExpansion moduleFan driveFunction moduleLight controllerLightbulbsLightingLighting technologyLuminaire controlOutput moduleRadio controlRadio receiverRetrofit lampsSocket coverStarter packUniversal dimmerUniversal dimming actuatorfrom the following manufacturers:Manufacturer overview catalogue Dimming actuator:ABBBerkerBusch JaegerEatonElsoEltakoESYLUXFinderfrogblue AGGiraHagerIssendorffJungLegrand BticinoLegrand SEKOLingg & JankeMDTMean WellMertenPehaSchneider ElectricSiemensThebenWielandZumtobel
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to

1 From 625
No results were found for the filter!
RECOMMENDED
3D
Siemens - 5SY4201-7 - Miniature circuit breaker C1A, 2-pole 5SY4201-7
$66.61 excl. VAT

*

plus shipping
($111.80 RRP***)
Miniature circuit breaker C1A, 2-pole
Siemens
| 5SY4201-7
RECOMMENDED
3D
Siemens - 5WG1528-1DB01 - KNX universal dimming actuator 2-fold, 2x 300VA 5WG1528-1DB01
$174.24 excl. VAT

*

plus shipping
($371.55 RRP***)
KNX universal dimming actuator 2-fold, 2x 300VA
Siemens
| 5WG1528-1DB01
RECOMMENDED
3D
Siemens - 5WG1125-1AB22 - KNX power supply 640mA, N125/22 5WG1125-1AB22
$202.92 excl. VAT

*

plus shipping
($432.72 RRP***)
KNX power supply 640mA, N125/22
Siemens
| 5WG1125-1AB22
RECOMMENDED
3D
Siemens - 5WG1141-1AB31 - KNX DALI gateway, 2x64 5WG1141-1AB31
$369.72 excl. VAT

*

plus shipping
($788.41 RRP***)
KNX DALI gateway, 2x64
Siemens
| 5WG1141-1AB31
RECOMMENDED
3D
Siemens - 5WG1567-1AB22 - KNX switching actuator, 16-fold, N 567/22 5WG1567-1AB22
$292.16 excl. VAT

*

plus shipping
($623.02 RRP***)
KNX switching actuator, 16-fold, N 567/22
Siemens
| 5WG1567-1AB22
RECOMMENDED
3D
Siemens - 3NA3830 - NH fuse link G000 100A 500AC - Low Voltage HRC fuse NH000 100A 3NA3830
$2.92 excl. VAT

*

plus shipping
($6.92 RRP***)
NH fuse link G000 100A 500AC - Low Voltage HRC fuse NH000 100A
Siemens
| 3NA3830
RECOMMENDED
3D
Siemens - 5WG1117-2AB12 - KNX bus coupler 5WG1117-2AB12
$23.74 excl. VAT

*

plus shipping
($50.63 RRP***)
KNX bus coupler
Siemens
| 5WG1117-2AB12
RECOMMENDED
3D
Siemens - 6AV2124-0MC01-0AX0 - Graphic panel TFT 12,1'' 6AV2124-0MC01-0AX0
$3,021.26 excl. VAT

*

Graphic panel TFT 12,1''
Siemens
| 6AV2124-0MC01-0AX0
RECOMMENDED
3D
Siemens - 5WG1534-1DB51 - Switch actuator 8x230VAC, 16/20AX - KNX Switch actuator for home automation 8-ch 5WG1534-1DB51
$261.88 excl. VAT

*

plus shipping
($558.45 RRP***)
Switch actuator 8x230VAC, 16/20AX - KNX Switch actuator for home automation 8-ch
Siemens
| 5WG1534-1DB51
RECOMMENDED
3D
Siemens - 5SV3314-6 - Residual current circuit breaker 40A,1+N,30mA,230V 5SV3314-6
$23.82 excl. VAT

*

plus shipping
($120.07 RRP***)
Residual current circuit breaker 40A,1+N,30mA,230V
Siemens
| 5SV3314-6
RECOMMENDED
3D
Siemens - 5WG1562-7AB02 - KNX electromotive actuator 5WG1562-7AB02
$144.38 excl. VAT

*

plus shipping
($271.86 RRP***)
KNX electromotive actuator
Siemens
| 5WG1562-7AB02
RECOMMENDED
3D
Siemens - 5WG1141-1AB03 - KNX DALI gateway Plus N 141/03 5WG1141-1AB03
$340.50 excl. VAT

*

plus shipping
($726.10 RRP***)
KNX DALI gateway Plus N 141/03
Siemens
| 5WG1141-1AB03
1 From 625