Button gateway for FTS14 systems - Touch sensor connector for home FTS14TG

Button gateway for FTS14 systems - Touch sensor connector for home FTS14TG – Eltako – 30014061 – 4010312315088: Button gateway f. FTS14 systems FTS14TG radio bus system, other bus systems, radio bidirectional, type of installation REG, width in modular units 2.5, number of actuation points 10, type of fastening clamp fastening, protection class (IP) IP20, button gateway for FTS14 systems . Standby loss only 1.3 watts. Connection to the Eltako RS485 bus. Bus cross-wiring and power supply with jumper. Operation in connection with FAM14 or FTS14KS. For better heat dissipation, a ventilation gap of 0.5 pitch units must be maintained on the left side. Use the enclosed DS14 spacer for this. Supply voltage 230V. With up to 3 FTS14TG button gateways, the telegrams of up to 90 B4T65 and B4FT65 4-way bus buttons or FTS61BTK and FTS61BTKL bus button couplers connected via a 2-wire button bus can be fed in with the conventional buttons connected to them. Data transmission and power supply take place simultaneously via just 2 wires. This eliminates the need for numerous individual button control lines. An FTS14EM may then not be required. Up to 30 B4T65, B4FT65, FTS61BTK and FTS61BTKL can be connected to an FTS14TG button gateway. The 2-wire bus is used to supply the connected devices with 29V DC and data is transmitted at the same time. Please only use standard bus or telephone lines. The 2-wire bus is galvanically isolated from the Eltako RS485 bus. The permissible total cable length is 200m. The RLC element included with the FTS14TG must also be connected to terminals BP and BN on the most distant bus button or bus push button coupler. With an FTS14FA in the Eltako RS485 bus, the button telegrams of the connected devices are also sent to the Eltako wireless network.