Radio switch actuator for shading - roller shutters FSB14

FSB14 30014004 4010312313732 EAN/GTIN DE 30298319 WEEE

Our best price
$50.43 excl. VAT
$73.00 (-30.92% RRP***)

4-5 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Switching actuator for shading/roller shutters FSB14 radio bus system, radio bidirectional,... more
Radio switch actuator for shading - roller shutters FSB14 – Eltako – 30014004 – 4010312313732: Switching actuator for shading/roller shutters FSB14 radio bus system, radio bidirectional, installation type REG, width in modular units 1, with bus coupling, removable bus module, on-site/manual operation, switching current ohmic 4A, max. switching capacity 4W, max. number of blind outputs 2, function Switching, type of current AC, switching actuator for shading elements and roller shutters with 2 channels for two 230V motors. 2+2 NO contacts 4A/250V AC, electrically isolated from the 12V supply voltage. Bidirectional. Standby loss only 0.1 watts. Modular installation device for mounting on DIN rail. Connection to the Eltako RS485 bus. Bus cross-wiring and power supply with jumper. Contact switching in the zero passage to protect the contacts and motors. A motor is connected to 1, 2 and N, a second motor, if necessary, to 3, 4 and N. If both relays of the FSB14 are switched on, 0.4 watts are required. If the supply voltage fails, the system is switched off in a defined manner. The buttons can be taught in either as direction buttons or as universal buttons: Local control with universal button: With each pulse, the switch position changes in the sequence up, stop, down, stop. Local control with direction button: The open switch position is specifically activated with a button impulse at the top. The DOWN switch position is specifically activated with a button pulse below. Another key pulse in the same direction interrupts the process immediately. With a key pulse in the other direction, however, the system is stopped and switched to the opposite direction after a pause of 500ms. Dynamic central control without priority: With a control signal from a button taught in as a central control button without priority, the up or down switch position is specifically activated. No priority because this function can be overridden by other control signals. Dynamic central control with priority: With a control signal of at least 2 seconds from a button taught in as a central control button with priority, the up and down switch positions are specifically activated. With priority because these control signals cannot be overridden by other control signals until the central command is canceled again by a key pulse up or down from the central control button. With a control signal, eg an FSM61 taught-in as a central control button with priority, the up or down switch position and the priority are specifically activated. With priority because these control signals cannot be overridden by other control signals until the central command is canceled again by the end of the control signal. Shading scene control: Up to 4 previously stored down times can be called up with a control signal from a button with double rocker that has been taught-in as a scene button or automatically by an additional wireless outdoor brightness sensor that has been taught-in. When controlled via the GFVS software, travel commands for up and down can be started with the exact travel time information. Since the actuator reports exactly the time driven after each activity, even when the button is used to move, the position of the shading is always displayed correctly in the GFVS software. The position is automatically synchronized when the upper and lower end positions are reached. The LED under the upper rotary switch accompanies the teach-in process according to the operating instructions and indicates control commands during operation by flashing briefly.
... more
Bus system KNX no
Bus system KNX radio no
Bus system radio bus yes
Bus system LON no
Bus system Powernet no
Radio bidirectional yes
Mounting REG
Width in division units 1
With bus coupling yes
Bus module removable yes
On-site / manual operation yes
With LED display no
Switching current ohmic 4 A
Max. Switching capacity 4 W
Max. Number of blind outputs 2
Function switching yes
Current Type AC

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Radio switch actuator for shading - roller shutters FSB14"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.