KNX presence detector ARGUS including bus coupler, 180 degrees, mounting height 2.20m, polar whit...

630419 4042811072223 EAN/GTIN DE 33842582 WEEE

Our best price
$107.37 excl. VAT
$150.10 (-28.47% RRP***)

15-16 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Presence detector pws/bril KNX ARGUS 180/2.20m 630419 bus system KNX, other bus systems without,... more
KNX presence detector ARGUS including bus coupler, 180 degrees, mounting height 2.20m, polar whit... – Merten – 4042811072223: Presence detector pws/bril KNX ARGUS 180/2.20m 630419 bus system KNX, other bus systems without, design presence detector, type of installation flush-mounted, material plastic, material quality thermoplastic, surface untreated, design of the surface glossy, color white, RAL number (similar) 9010, With bus coupling, creep under protection/rear field monitoring, stairwell monitoring, response brightness adjustable, optimal mounting height 2.2m, max. range to one side 8m, max. frontal range 12m, detection field diameter on the floor 16m, horizontal detection angle 0... 180°, number of channels 5, number of binary inputs 0, switching capacity 0W, min. duty cycle 1s, max. duty cycle 15300min, min. depth of device box 46mm, for system M. Presence detection indoors. If the KNX ARGUS Presence detects small movements in the room, data telegrams are sent via KNX, e.g. to control lighting, blinds or heatingxx With brightness-dependent motion detection for lighting control, the device constantly checks the brightness in the room. If there is sufficient natural light, the device switches off the artificial light even if a person is present. The run-on time can be set via the ETS. With integrated bus coupler. For wall mounting in a 60 mm installation box, optimal use at 2.2 m. With creep protection. KNX software functions: Five movement/presence blocks: Up to four functions can be triggered per block. Telegrams: 1 bit, 1 byte, 2 bytes. Normal operation, master, slave, monitoring, security pause, locking function. Two motion sensors: Sensitivity and range can be set separately for each sensor. Learnable staircase lighting time. Actual brightness value: Can be recorded via the internal and/or an external light sensor. actual value correction. Detection angle: 180 degrees. Range: 8 m right/left, 12 m forward (at a mounting height of 2.20 m). Mounting height: 2.2 m or 1.1 m with half the range. Time: adjustable in steps from 1 s to 8 min (potentiometer) or adjustable from 1 s to 255 hours (ETS). Number of levels: 6. Number of zones: 46. Number of motion sensors: 2, separately adjustable. Light sensor: internal light sensor continuously adjustable from approx. 10 to 2000 lux (ETS), external light sensor via KNX. EC directives: Low Voltage Directive 2006/95/EG and EMC Directive 2004/108/EG. Scope of delivery: With bus connection terminal and support plate. With cover segments to limit the detection area. Material: thermoplastic brilliant. Colour: glossy polar white.
... more
Bus system KNX yes
Bus system KNX radio no
Bus system radio bus no
Bus system LON no
Bus system Powernet no
Other bus systems without
Radio bidirectional no
Execution Presence detector
Mounting Flush
Material Polycarbonate
Material quality Thermoplastic
Surface protection untreated
Execution of the surface glittering
Colour polar white
RAL number (similar) 9010
Transparent no
With bus coupling yes
Extension input no
Undercrawl / Rearfield yes
Mode switch no
Animal zone no
Staircase monitoring yes
Adjustable response brightness yes
Teach function for response brightness no
Off-delay self-learning no
Optimum mounting height 2.2 m
Max. Range to one page 8 m
Max. Range frontal 12 m
Detection field diameter on floor 16 m
Detection angle horizontal 0..180 °
Amount of channels 5
Switching capacity 0 W
Minimum duty cycle 1 s
Max. Duty cycle 15300 min
Min. depth of the device socket 46 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "KNX presence detector ARGUS including bus coupler, 180 degrees, mounting height 2.20m, polar whit..."
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.