Fan - Ventilator for in-house bathrooms ER 60 H

ER 60 H 0084.0104 4012799841043 EAN/GTIN DE 78107228 WEEE

Our best price
$258.96 excl. VAT
$625.14 (-58.58% RRP***)

4-5 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Fan ER 60 H nominal width 75mm, volume flow 62m³/h, color white, medium temperature -20 ... 40°C,... more
Fan - Ventilator for in-house bathrooms ER 60 H – Maico – 0084.0104 – 4012799841043: Fan ER 60 H nominal width 75mm, volume flow 62m³/h, color white, medium temperature -20 ... 40°C, mounting type flush-mounted, rated voltage 230V, mains frequency 50Hz, composition other, nominal current 0.12A, speed 8501/min, material of the housing Plastic, direction axial, protection class (IP) other, width 250mm, height 250mm, depth 150mm, version with humidity control and base load switching: Barrier-free product as it switches on/off automatically. Switch-on point: 60%, 70%, 80% or 90% relative humidity adjustable with jumper. Switch-off point: approx. 10% below the switch-on point (always a fixed value). Not speed controllable. Not suitable for second room ventilation. Manual operation possible via a switch, e.g. B. Switching on full load using the light switch. Standard circuit: Fan runs in base load operation, humidity control is active, full load operation when the switch-on point is exceeded, base load operation when the switch-off point is undershot. Further switching variants: fan operation with or without base load operation, manual switching on of full load, switching the fan on or off using a switch. Switching on the full load using the light switch and associated follow-up control (run-on time 6 minutes) of the fan. The fan always runs until the humidity in the room has fallen below the switch-off humidity, regardless of the circuit variant. Fan with cover and G2 filter for installation in flush-mounted housing. For one-room or two-room ventilation with a single fan (exception: version H and GVZC EC). Electrical plug connection for quick installation of the fan in the housing. Hassle-free filter changes without tools. Cover can be rotated by +- 5°, making it possible to compensate if the housing is inserted crookedly. Easy-to-install snap fastening of the fan in the housing. Color traffic white, similar to RAL 9016. All MAICO ER devices comply with protection class IP X5 and can therefore be installed in area 1 according to DIN VDE 0100-701, even with water jets. For details see planning information. Protection class II. The extremely steep characteristic curve shows the high pressure capacity of the ER fans. Robust energy-saving capacitor motor. ER 60 GVZC EC: with energy-saving EC motor. Motor with thermal overload protection. Maintenance-free, with ball bearings closed on both sides. Volume flow characteristic curve and leakage air rate tested by TÜV Bayern eV Leakage air volume flow < 0.01 m3/h. Shaft level difference according to DIN 4109, tested by IAB Oberursel. With VDE mark. Article: ER 60 H, version: humidity control, delivery volume: 35 m3/h / 62 m3/h, speed: 850 1/min / 1250 1/min, air direction: ventilation, speed controllable: no, SEC average: -20.12 kWh /(m2*a), voltage type: alternating current, rated voltage: 230 V, mains frequency: 50 Hz, power consumption: 10 W / 21 W, IMax: 0.12 A / 0.16 A, protection class: IP X5, mains supply cable: 5 / 1.5 mm2, installation location: wall / ceiling, installation type: flush-mounted, system type: decentralized, material: plastic, color: traffic white, similar to RAL 9016, weight: 1.5 kg, filter class: G2, blow-out direction: sideways, width: 250 mm , height: 250 mm, depth: 150 mm, conveyor temperature at IMax: 40 °C, follow-up time: 6 min / follow-up time available when using an optional switch (e.g. light switch), sound pressure level: 26 dB(A) / 36 dB(A) / Information according to DIN 18017-3 with an equivalent absorption area AL = 10 m2, nominal width: 75 mm / 80 mm
... more
Nominal width 75 mm
volume flow 62 m³/h
Colour white
Medium temperature -20..40 °C
Mounting Flush
Rated voltage 230V
Power frequency 50 Hz
Compilation other
Current 0.12 A
Number of revolutions 850 1/min
Material of the housing Plastic
Direction Axial
IP protection) other
Noise 26 dB(A) re 1 pW
Width 250 mm
Height 250 mm
Depth 150 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Fan - Ventilator for in-house bathrooms ER 60 H"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.