Impulse switch, 1 NO, 8-230VUC, 16A ES61-UC

ES61-UC 61100501 4010312107966 EAN/GTIN DE 30298319 WEEE

Our best price
$35.35 excl. VAT
$65.10 (-45.7% RRP***)

4-5 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Impulse switch 8-230VUC,1S,16A ES61-UC function other, type of installation other, width in... more
Impulse switch, 1 NO, 8-230VUC, 16A ES61-UC – Eltako – 61100501 – 4010312107966: Impulse switch 8-230VUC,1S,16A ES61-UC function other, type of installation other, width in modular units 3.1, installation depth 18mm, number of contacts as NO contact 1, number of contacts as NC contact 0, number of contacts as changeover contact 0, control voltage 1 8 ... 230V, control voltage type 1 AC/DC, control voltage 2 230 ... 230V, control voltage type 2 AC, rated switching current 10A, supply voltage 250 ... 250V, voltage type of the supply voltage AC, max. incandescent lamp load 2000W, max. fluorescent lamp load 1000VA, max Fluorescent lamp load (duo circuit) 1000VA, max. 1 potential-free NO contact 10A/250V AC, incandescent lamps 2000W. No standby loss. For flush mounting. 45mm long, 45mm wide, 18mm deep. The latest hybrid technology combines the advantages of wear-free electronic control with the high performance of special relays. Either universal control voltage 8..230V UC at the control input +A1/-A2 or 230V with up to 5mA glow lamp current at the control input with glow lamp symbol (L)/-A2(N). The simultaneous use of two potentials at the control inputs is not permitted. Very low switching noise. No constant power supply required, therefore no standby loss. Due to the use of a bistable relay, there is no coil power loss and no heating as a result, even when switched on. The relay contact can be open or closed during commissioning and is synchronized with the first actuation. If this impulse switch is in a circuit that is monitored with a FR12-230V field isolation switch, it does not require an additional base load, but the monitoring voltage of the FR12-230V must be set to max. The electronics do not have their own power supply and therefore no power consumption in either contact position. Only during the short control pulse of only 0.2 seconds does the control current flow, which activates the microcontroller, allows it to read the last switching state from its non-volatile memory, switches the bistable relay in the opposite direction accordingly and writes the new switching state back to the memory.
... more
Function other
Mounting Flush mounting
Width in division units 3.1
Depth 18 mm
Number of contacts as normally open 1
Control voltage 1 8..230 V
Control voltage type 1 AC/DC
Control voltage 2 230V
Control voltage type 2 AC
Rated operating current 10 A
Supply voltage 250V
Voltage type of the supply voltage AC
Max. Incandescent lamp load 2000 W
Max. Fluorescent lamp load 1000 VA
Suitable for manual operation no

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Impulse switch, 1 NO, 8-230VUC, 16A ES61-UC"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.