The following 5808 products have been found matching your search "Deskbox":

Item/s (5808)

Categories | Others (10)

Found in shop categories: 10

Socket board - How many consumers can be connected to a socket strip? How do you integrate the power strips into office furniture? You can find out in this eibabo® catalogue, and find the right product for you from the large selection of socket strips. Socket strips are also referred to as multiple sockets or power strips. These provide a connection to the power grid for several electrical consumers with a standardized plug connection. In contrast, an extension cord usually only has a single connection.Which criteria are important for the purchase of a power strip?A power strip is a relatively simple tool for expanding the electrical installation. Nevertheless, it is advisable to pay attention to a few basic things. These are:Sufficient number of slotsStable material quality of cable, plug and socketsThe presence of surge protectionSpecification of a test mark such as the GS seal or the VDE sealAn adequate IP rating for the intended useAdditional equipment (switches, child protection and so on) How many devices can be connected to a power strip?In principle, the number plays a subordinate role. It depends on the sum of the power. Please note that under no circumstances should too many powerful consumers be connected to a socket strip. Remember that a device doesn't have to be big to require large amounts of power. You should therefore not connect high-power devices such as refrigerators, washing machines, dryers, space heaters, air conditioners or ovens to a power strip. Small consumers such as lamps, computers, entertainment devices or printers do not pose a problem. TIP:The connected loads should not exceed a combined output of around 2300W at 10A or 3600W at 16A measured at 230V mains voltage. Please make sure that you do not connect multiple socket strips in a row. Otherwise the resistance (impedance) could become too large due to the concatenation.Can socket strips also be sources of danger?As long as you are using a power strip properly, there is nothing to worry about. Pay attention to the performance of the connected devices and to a safe laying of the cable. Never lay a line under a carpet that many people walk over every day. Over time, this can cause the wires in the line to break, heat up, and cause sparks. Check the cable and the power plug of the strip regularly. If you find any damage, replace the power strip.Image: Bachmann 333.400 19 inch power stripWhat types and equipment are possible with socket strips?Combinations of different equipment features are also often available. At eibabo® you can get socket strips with switches and overvoltage protection or master/slave socket strips with switches, among other things. Further explanations would be, for example:Switch, toggle switch or foot switchtimersOvervoltage protectionchild lockMaster/slave power strips Or the following statements:19 inch power stripsALU socket stripsOutdoor sockets and garden sockets or combination plugsDesk boxes and table socketsEnergy cube (SCHUKO or up to 400V CEE)Multiple crafting barsSocket strips for IEC cold devicessocket towerssurge outlets What are the advantages of power strips with surge protection?Power strips with overvoltage protection protect connected devices from damage because voltage peaks are reduced. An upstream coarse protection in the meter cabinet and medium protection in the electrical distribution is also advisable. TIP:We recommend the use of surge protection if you supply valuable technology with the additional sockets. A surge protector has another protective element that absorbs additional current. These can be current fluctuations or voltage peaks, which could otherwise damage or destroy your connected electronics.What are master/slave power strips?Power can be saved with master/slave socket strips. An integrated electronic circuit detects whether power is flowing through the master socket. If power is present at the master socket, the slave sockets are activated. If no more current flows through the master socket, the slave sockets switch off. The typical application is a computer and its connected peripheral devices. If the computer is switched on via the master socket, monitors, scanners and printers also start. Turning off the computer also disables all other devices, avoiding going into sleep mode.What do I use 19 inch power strips for?19 inches is a standard installation size for server cabinets. If you want to install many devices in your server cabinet, you need an adequate power supply. With a 19-inch socket strip, up to 10 devices can be connected. The socket strip is adapted to the profile rail of the 19-inch server cabinet and can be mounted directly.We recommendIn order to set up additional protection, we also recommend an uninterruptible power supply (UPS) in addition to integrated overvoltage protection.You can also get high-quality UPS systems in the eibabo® shop. Use our intelligent search.What options do I have for permanent installation of power strips?You need electricity at practically every workplace. With socket strips for mounting on, under or in a desk, you can create connection points for monitors, printers, beamers and telephones. So you don't have to crawl under the desk every time you want to connect something. In addition, the connections don't get dusty as quickly because they are easy to access for cleaning or are integrated into a housing. In addition to the desired number of power connections, other interfaces (USB, HDMI and others) are often available. In addition to mounting on or under the tabletop, it is sometimes possible to retrofit it by drilling or cutting out the tabletop.With socket units you remain flexible. These are housings that you can individually equip with suitable inserts. This is how you put together the perfect supply bar yourself. Catalogue content:In this eibabo® catalogue Domestic switching devices > Multiple socket you will find items from the following product groups:Item overview:Artisan tinComputer power stripConnection accessoriesDouble socketEnergy measurementFranceGarden socketGround spike socketMains interference filterMonitoringNetwork cabinetsNetwork connectivityNetwork interfaceNine-way socketOvervoltage protectionPlug-in modulePower distributionPower stripsPower supplyRedundancy moduleRetrofitSchuko socketSocket caseSocket coverSurge protection deviceSurge protection moduleTable socketTable socketsfrom the following manufacturers:Manufacturer overview catalogue Socket board:BachmannBrennenstuhlDehnE+P ElektrikEatonEaton USVEgloEnocHamaHartingJungKindermannLegrand BticinoOBOPentairPollmannRittalSchneider Elec.(APC)Schneider ElectricSchäfer IT-SystemsTehalitVertiv

Console systems - Console systems make it easier to read and operate components such as keyboards, touch screens or mice and offer a flexible, often folding additional storage area for documents and small parts during work. They can be part of fittings for machine operation and of server, standing and add-on control cabinet systems. So-called connection boxes are also part of the console systems and are central distributors that provide a different number of different types of sockets depending on the model. With the use of console systems from the eibabo online shop, on the one hand, the requirements for occupational safety with regard to compliance with ergonomic guidelines are taken into account, on the other hand, with connection boxes, they offer the operators of systems and machine operators clearly arranged and central energy extraction points for performing important tasks.Catalogue content:In this eibabo® catalogue Cabinet enclosures > Desk system (switchgear cabinet) you will find items from the following product groups:Item overview:Connection boxConsoleConsole system baseConsole system middle sectionConsole system upper partControl housingControl panelCoverDeskDesk baseDesk center sectionDesk housing (empty)Desk in one pieceDesk systemDesk system (enclosure/cabinet)Desk system (switchgear cabinet)Desk topLecternMiddle partMounting plateOperator housingOperator panelPartial mounting plateService deskService tableStorage deskTeacher's deskUniversal deskfrom the following manufacturers:Manufacturer overview catalogue Console systems:Conrad ElectronicHenselRittalSchneider Electric

Corded analogue telephone - In this eibabo® catalogue Telecommunication equipment/office devices > Analogue telephone with cord you will find items from the following product groups:Item overview:Analog base phoneAnalog comfort telephoneAnalogue telephone with cordBase phoneCard phoneCard telephoneComfort desk phoneCompact phoneConvenience phoneCorded analog phoneCorded PhoneDesigner phoneDesk phoneMemory phoneMini pay phoneMobile moduleMonitor stationPay phonePhonePhone deviceSpecial phoneSpecial telephoneStandard phoneTelephoneTelephone analogue, cordedTelephone setWall apparatusWall phonefrom the following manufacturers:Manufacturer overview catalogue Corded analogue telephone:AgfeoAuerswaldGigasetIVSKomsaPanasonicTiptel

Front panel patch panel empty - To create an individual data flow distribution, you can either rely on ready-made patch panels or configure your patch panel yourself. Depending on what you need, the eibabo online shop offers you empty housings that are completely unequipped and, depending on the model, have a different number of places for installing plug connections, so-called ports. As a rule, these are devices made of stable sheet steel for surface mounting, where the upper part of the housing can usually be easily attached and removed without tools. If you do not want to mount your patch panels directly on the wall, you also have the option of placing them on your desk or mounting them on a top-hat rail in the control cabinet using a top-hat rail adapter. You can also get the data cables you need, the modules for the plug connections and the tools you need to hang up here in the shop.Catalogue content:In this eibabo® catalogue Cabinet enclosures > Front panel/patch panel empty (switchgear cabinet) you will find items from the following product groups:Item overview:19'' patch panelConnector plateData patch panelDIN railDIN rail panelDistribution panelDistributor plateFiber optic distributorFront panelFront Panel/Patch PanelFront panel/patch panel blankFront panel/patch panel empty (control cabinet)Front panel/patch panel empty (enclosure/cabinet)Front panel/patch panel empty (switchgear cabinet)Meter cabinetModular panelModule carrierModule housingMounting plateMounting plate patch panelMultimedia fieldPatch panelPower supplySplice boxSubrackSupporting frameSurface boxfrom the following manufacturers:Manufacturer overview catalogue Front panel patch panel empty:CorningEFB-ElektronikMetzPhoenixRittalTelegärtner

Mounting box - Have you ever heard of a device cup? They are also known as module carriers, universal carriers or device holders and create the connection between built-in sockets and wired office desks, for example. In this case, the outlets are the devices. They are snapped into the upper part of the device cup and connected. Then the base of the device cup is simply inserted into the supply unit of the table, in which the power, telephone or network are connected. The supply units are usually installed on the side below the table top or can be reached directly via a covered access shaft in the table top. The device cups can be equipped individually. Depending on the size of the cup, a different number of power, telephone or network connections can be made. If you are looking for device cups, then the eibabo technology store is the right address for you. Here you will find device cups in different sizes and from different manufacturers.Catalogue content:In this eibabo® catalogue Sub-floor systems > Mounting box you will find items from the following product groups:Item overview:Assembly setBuilt-in boxCarrier systemConnector panelDevice carrierDevice cupDevice useDIN railElectra planEquipment carrierHinged lidInstallation devicesInstallation housingMetal mugModule carrierModule housing rackMounting boxMounting bracketMounting frameMounting plateMounting rail adapterRail adapterSnap-in socketUniversal carrierfrom the following manufacturers:Manufacturer overview catalogue Mounting box:CommScope EMEACommScope/AMP NetconnCorningOBOPanduitTehalitTelegärtner

Push button - Experience the extensive product selection of our switch programs and find your product from the button and momentary switch area here. Read on and learn more about the different types of buttons, their functions and areas of application. This eibabo® catalog mainly contains buttons for classic domestic use. These are either styli or complete devices for wall installation and wall mounting. The different types include single and double buttons and rocker buttons, rotary buttons, manual release buttons, key buttons and key switches, series buttons and pull-cord switches. Another product group are the pushbutton switches / rocker switches.Are you looking for pushbutton sensors, pushbuttons for industrial applications (e.g. on machines or in consoles) or pushbuttons for use in control cabinets? For this we offer you separate categories with a huge selection. Please use our powerful search.Image: Jung 531-41 U Multi-Switch double buttonWhat is the difference between a button, a switch and a tactile switch?Switching processes accompany us every day. This begins early in the morning when the alarm clock is switched off and the light is switched on. As a rule, we don't worry about how the technology behind each shift works. Typically, these are devices in which a mechanism ensures that a circuit is closed or opened. However, if we take a closer look at the type of circuit, clear differences become apparent.The deskThe classic, simple switching process (e.g. at the light switch) consists of two states - ON and OFF. A conductive connection is made or broken between two contacts. We operate the rocker switch, a circuit closes and the light shines. We operate the other side of the paddle switch, the circuit is broken and the light goes out. The shift paddle remains in the corresponding position with every shift. As a result, the respective switching status ON or OFF remains until the rocker switch is pressed into the other position.The buttonThe basic function of the button is slightly different. A button does not switch, but closes the circuit via a pressure pulse. The functional principle corresponds to that of a switch. Here, too, a conductive connection is established between two contacts by actuating a rocker or a push button. The current flows and the lamp lights up or a bell rings. Unlike the switch, the circuit is immediately broken again when the pressure pulse ends. The rocker or pushbutton is returned to its original position by a spring mechanism. Other types of styli work in the opposite way. The circuit is separated by the pressure pulse and then closed again. An application example for this are electromagnets on the door opener. Switching scenarios can also be implemented via these pressure pulses by using additional relays. You know this from lighting in stairwells, for example.The tactile switchA tactile switch is a combination of a button and a switch. Such a device is similar to a switch in terms of the switching function and a button in terms of operation. A rocker switch or push button closes the circuit when pressed and then returns to the starting position. Unlike the button, however, the circuit remains closed until another pressure pulse interrupts the circuit. So it is the mechanism that distinguishes the pushbutton switch from the switch.Perfect opticsThe rockers of pushbutton switches arranged next to each other are always in the same position relative to each other, regardless of the current switching status.This results in an always uniform and orderly view. Unlike pushbuttons, relay switching with pushbutton switches is not possible. As a rule, there is no significant optical difference between switches, buttons and pushbutton switches from the same switch range. Especially when it comes to rockers, tilting controls, sliding elements or rotary handles.What are normally open, normally closed and changeover contacts?Buttons are available as openers, closers and changers. In most cases, a button is used as a closer. The connected circuit is closed with a pressure pulse. As already described, this state only lasts as long as the button is pressed. The closer works in the opposite direction. In a basically closed circuit, pressing a button breaks the circuit. As you probably already suspected, a changer can take over both functions. You will surely wonder if this is not a switch. And you are right. A changeover contact corresponds to the pushbutton switch described above.What is a key switch?Key buttons are classic buttons, but they do not have manual controls. Instead, a suitable key is required. Turning the key in the lock changes the switching status. For example, turning the key will open a roller door for as long as it is held in the OPEN position. The roller door stops when the key returns to the zero position. However, such devices are usually designed as pushbutton switches / changeover switches. In these cases, turning and holding the key in the other direction closes the roller door.How do I recognize the switching status of pushbutton switches?Simply designed pushbutton switches can leave you in the dark about which switch position is currently applied. However, most pushbutton switches have a small indicator light that signals the active status.Are all button inserts compatible with all switch ranges?You can buy buttons from us for the most popular switch programs from all relevant manufacturers. These include Berker, Busch-Jaeger, Siemens, Jung, Gira, Elso, Merten, Hekatron, Sommer, Rademacher as well as von Peha, Hager and WindowMaster. We carry both flush-mounted devices and surface-mounted versions.Please note that every manufacturer offers both button inserts for installation in the switch box and complete devices for flush-mounting and surface-mounting. If you decide to buy button inserts, please make sure they are compatible with the switch range you want. TIP:Choose pushbutton inserts and switches from the same manufacturer and from the same series. Cross-series or cross-manufacturer compatibility is not guaranteed, especially for switch ranges with a very individual design. We recommend first choosing a switch range that corresponds to your visual ideas. After that, the search for the right switches and buttons is easier.Can I also carry out KNX controls with a normal button?In this catalog you will receive buttons without a network connection. With a network-capable KNX button, you can operate the end devices integrated in your smart home network. This can be:the blinds, which let you move up and downthe light that you switch and dimthe heating you controlthe doors you open and closecompletely individual, user-defined scenarios It is generally operated using a different number of buttons or rocker switches on the device and/or via displays. KNX buttons specially made for this are more complex than the buttons without network connection offered in this catalogue. This extends to controls with an elegant touch display. Temperature sensors, LED displays and backlights are often already part of a unit. In addition, it is often possible to provide each key with additional functions, which are triggered, for example, by long pressing, double-clicking or even triple-clicking. A corresponding interface is required for communication with your building automation. With some KNX buttons, the so-called bus coupling is already integrated, with others you have to install it additionally and plug in the button. TIP:Using a KNX universal button interface, you can make simple buttons network-capable. With a KNX universal button interface, however, you can basically turn any conventional button into a KNX button. These interfaces are installed in a deep device box behind the conventional button and take on the task of a binary input. This converts the analogue, mechanical switching processes into KNX signals. But this solution is more for:simple standard applications such as switching lightsthe modernization of analogue existing installationsinexpensive and functionally manageable system extensions Complex parameterizations are not possible with these simple buttons. If you want this, the KNX push-button sensors designed for this are the better choice. Catalogue content:In this eibabo® catalogue Domestic switching devices > Push-switch button you will find items from the following product groups:Item overview:Branch officeButton buttonsCard switchDouble buttonDouble button series buttonDouble toggle switchFire alarmGroup buttonInstallation buttonInternal buttonManual releaseManual release buttonNostalgia switchPanic buttonParallel buttonPush buttonPush button switchRadio controlReversing buttonRocker switchSignaling contactsSingle buttonTactile elementToggle switchVentilation buttonWireless sensorWireless wall buttonZero clampfrom the following manufacturers:Manufacturer overview catalogue Push button:Assa Abloy effeffBEGA GantenbrinkBerkerBerner TorantriebeBusch JaegerElsoEltakoGiraHagerHekatronHHGIssendorffJungKindermannLegrand BticinoMertenOBOPehaRademacherSiemensSomfySommerWindowMaster

Wiring diagram pocket - Electrical installations can be very confusing at first glance. It is not always immediately obvious where the required connections are located or where the lines to be checked have been laid. In order to be able to get a quick overview of the installation structure, circuit diagrams are created, especially for complex systems, and stored in the control cabinet for the maintenance personnel. And so that the circuit diagram doesn't get stuck in a crack somewhere, only to be lost later, thorough installers put a circuit diagram pocket in, on or near the control box in which all the documentation for the installation can be kept. Plastic circuit diagram pockets with different attachment options are available from the eibabo technology store. This means that the storage of circuit diagrams or maintenance logs is well organized and immediately accessible when needed.Catalogue content:In this eibabo® catalogue Cabinet enclosures > Document holder (switchgear cabinet) you will find items from the following product groups:Item overview:Accessories for control cabinetAdd-on distributorAttachment accessoriesBayed cabinetCircuit diagram pocket/holderCircuit diagram pocket/holder (control cabinet)ClipboardControl cabinet accessoriesControl cabinet bagDocument bagDocument filingDocument holder (control cabinet)Document holder (enclosure/cabinet)Document holder (switchgear cabinet)Door componentDrawing bagHigh current systemPlan holderPlan pocketSchematic compartmentSchematic deskSchematic holderSchematic pocketTransparent pocketWiring diagram compartmentWiring diagram deskWiring diagram holderWiring diagram pocketfrom the following manufacturers:Manufacturer overview catalogue Wiring diagram pocket:ABNCorningEatonEFB-ElektronikHagerHenselLegrand BticinoRittalSchneider ElectricSiemensStriebel & John

Table lamp - Regardless of whether it stands on the chest of drawers and envelops a room in subtle light or whether it provides optimal lighting for doing homework on the children's desk. The table lamp is used in almost every household and fulfills different functions. It can therefore serve as an element for decoration or as an important and helpful piece of furniture for completing necessary work. With the modern table lamps from the eibabo technology store, you can bring light into even the darkest of corners. With numerous designs, different lighting technologies and clever mounting options, there are hardly any limits to their possible uses. In addition to classic light sources, modern and energy-efficient LEDs are also used.Catalogue content:In this eibabo® catalogue Luminaires > Table luminaire you will find items from the following product groups:Item overview:Ambient lightCling lightClip lightDesk lampDesk luminaireExamination lightFloor luminaireHousing lighting luminaireInterior lightLoupe lightMagnet stick lampMagnetic lightMagnifying lampOffice lightOffice luminaireOptician lampOutdoor lampReading lightSingle lightSingle seat lampTable clamp lampTable lampTable luminaireTable top lightTask lightUmbrella lightWorkbench lightWorkplace lighting lampfrom the following manufacturers:Manufacturer overview catalogue Table lamp:BEGA GantenbrinkBrilonerBrumbergBöhmerEgloFabas LuceFischer & HonselHelestra LeuchtenHonselIDVLEDVANCEMeyer + SohnNeuhaus LeuchtenPhoenixRidi-LeuchtenRohrluxScharnberger+Has.SLVTriluxTrio-LeuchtenWaldmann