The following 8947 products have been found matching your search "AP-box":

Item/s (8947)

Categories | Others (10)

Found in shop categories: 10

Plug-in terminal - Would you like to connect solid or stranded conductors quickly and safely? This is not a problem with the plug-in terminals from the eibabo® technology store. Choose from numerous different versions for a wide range of applications. Best prices, a wide range of additional information and illustrations, fast availability and worldwide shipping characterize our shop. In addition to the company Wago, other well-known manufacturers offer high-quality plug-in terminals. The eibabo® shop stocks plug-in terminals from the brands ABN, Barthelme, Eaton, Finder, Hager, Hellermann Tyton, Kleinhuis, OBO, Phoenix, PROTEC.class, Spelsberg and Striebel & John.You will find a large selection of clamps for different requirements and areas of application. There is a large number of terminals, which are designed in different designs depending on the wire type and cross-section and thus perfectly match the respective area of application. These include bus coupler terminals, compact connection terminals, box terminals, terminal strips and connection terminals. Depending on the design and area of application, the plug-in terminals have a certain number of slots. Some variants of clamps are transparent. This will help you see if the wire is properly attached.Image: WAGO 243-208 screwless connection terminalWhat are plug-in terminals?Plug-in terminals is the name for numerous different spring-loaded terminals, spring-loaded terminals, connecting terminals or screw terminals. These are used in electrical engineering to connect wires, cores and lines. Clamping or screwing an electrical conductor offers a safe and maintenance-free connection. Already knew?Push-in terminal does not mean that the wire is fixed by inserting it into the terminal. There are also push-in terminals where the wire is held in place with a screw. The plug-in terminal is also often referred to as a Wago terminal. The clamps were given this designation after the manufacturer Wago. He introduced the spring clamp technology in the early 1950s and has continuously improved it since then. Since the 1970s, the product has revolutionized electrical installation, as screw connections can now be dispensed with in many areas. However, this does not mean that clamps with screw fastening are no longer used. In this catalog you will also find clamps with screw connections, also known as luster clamps or Euroclamps.Where are plug-in terminals used?Push-in terminals are one of the most popular methods of making electrical connections. Solid or stranded conductors can be connected quickly and safely with the help of plug-in terminals. In our shop we offer different types of clamps, which are suitable for different areas of application. For example, there are terminals for use in the following branches of industry:electrical industryautomotive industrytelecommunicationscommunications engineeringPlant construction and mechanical engineeringcomputer engineeringmedical technology In the private sphere, plug-in terminals are mainly used to clamp rigid wires in junction boxes, in control cabinets, in domestic installations or to connect lights.What should I know about plug-in terminals before buying?Electrical installations and electronic circuits almost always have to be connected to external devices, power sources, inputs or outputs. These connections are made using plug-in terminals. These are available in many different types, shapes, sizes and denominations. Choosing unsuitable plug-in terminals can cause some difficulties. These can be simple space problems within a terminal box or have serious consequences such as fires. Therefore, we would like to introduce you to some types of plug-in terminals. Although there are many other variants, we limit ourselves to the most well-known products, which can be found in almost every sector. The areas of application range from classic household wiring to automated applications.Push-in terminalsSo-called push-in terminals use small spring-loaded contact levers. The highlight is that the electrical conductor can be pushed into the terminal without tools. However, it is not possible to pull it out just as easily. The wire is effectively held in place. Compared to the screw clamp, this fixing method offers the advantage that the wire cannot be damaged during installation. If you want to release a pinched wire, pull on the wire while making an alternating twisting motion. In this way, you release the plug connection without damaging the plug-in terminal, the spring mechanism or the electrical conductor.Please noteNot all push-in terminals are designed for multiple use. Some clamp springs hold the wire 'forever'. If you want flexibility in your installation for modifications or repairs, choose push-in clamps with a lever-release lever. This releases the wire again when actuated.When choosing the right terminal, pay attention to the appropriate cable cross-section. This should always correspond to the permitted nominal cross-section of the terminal. You will typically find this information on the packaging. An electrical conductor that is too thin cannot be securely clamped and held.terminal blocks and terminal blocksTerminal blocks accept a single wire and connect it to a circuit or other system. Terminal blocks are available in a variety of sizes, ratings and shapes and are available in rows. Each terminal in a row is only fitted with one wire. This variant of the plug-in terminal is useful for connections that are subject to regular maintenance, repair or modification. Terminal blocks always have a mechanically strong body made of plastic or another insulating material. In addition to the spring attachment, versions with a locking lever are also available. The wire is inserted and a clamping lever holds the electrical conductor in place. Another common connection method is to use a screw. TIP:Great care must be taken when tightening the screw. Overtightening the inserted cable can damage the electrical conductor. An unreliable or potentially dangerous connection would result. In some variants, the screw presses the electrical conductor against a metal body. On other screw-connection terminal blocks, the screw presses onto a flat metal head. This in turn presses the wire against a metal insert.Pluggable terminalsPluggable terminals have a cable entry to allow the wire to be connected. On the other hand, these terminals have a plug output and thus offer a pluggable connection for further installation. This type of plug-in terminal is useful when the connection must be frequently disconnected for maintenance or inspection. These contacts are usually screwed.barrier clampsBarrier clamps also use screws as the mechanism for holding the electrical conductors. Barrier clamps often have more than one connection point for multiple cables or wires. These connection points are isolated from each other (barrier). Depending on the model, barrier terminals have small covers or housings. These protect the cabling additionally. Barrier clamps find application in house wiring and other high voltage connections where arcing or potential short circuits must be avoided.  Catalogue content:In this eibabo® catalogue Installation, isolation and connection material > Screw less terminal you will find items from the following product groups:Item overview:Apartment distributorCable connectionCan clampClamp adapterClamping railComplete cabinetConnection clampConnection clampsConnectorConnector pinsCounter distributionCounter systemDirect measurementEngineering centerFuse boxFuse distributorJunction box clampJunction box terminalMeter boxNeutral terminal barOverhead line clampPower boxRelaxation gripSix-wire terminalSmall distributorsSpare PartsTerminal blockTwo-wire terminalfrom the following manufacturers:Manufacturer overview catalogue Plug-in terminal:ABNBarthelmeEatonFinderHagerKleinhuisOBOPhoenixSpelsbergStriebel & JohnWAGO
Dimming actuator - The technical requirements for the use of dimming actuators are very extensive. Why do I need a dimming actuator and which dimming actuator is the right one for me? In this eibabo catalog you will find many dimming actuators from different manufacturers, for example from the top brands ABB, Berker, Busch-Jaeger, Eaton, EVN, Gira, Hager, Issendorf, Jung, Lingg & Janke, MDT, Merten, Siemens and Theben various automation systems or conventional applications.How do I plan the lighting correctly?You should not start with the control technology first, because this follows at the very end of the lighting planning. First you should plan the lighting according to necessity, appearance, ambience and your own wishes, followed by the functional requirements and then find the right lights.Save by planning!The more precise, the cheaper the execution of the installations. The more complex the functional requirements are, the more important it is to plan and research a suitable SmartHome system.Only then is the functional implementation carried out, which consists of many other topics.What should I know beforehand?Which lights do I want to install?Do I want to use a conventional installation or a bus system?Should the SmartHome be wired or radio (KNX, DALI, or Zigbee radio protocols such as Hue)?Which lights are switched and/or dimmed together and how?Should it be controlled via app or voice assistant?and much more... ... this results in the following findings, for example:Which cables and lines are required?Which control components (e.g. dimming actuators) have to be considered?To what extent do the operating resources have to be secured?How much space must be provided in the electrical distribution?Do I have to consider special flush-mounted sockets for lights?and much more... What do I have to consider before buying a dimming actuator?Before you buy a KNX dimming actuator, the load types of the equipment and their performance should be checked carefully. There are basically 3 types of KNX dimming actuators. There are dimming actuators with the control type leading edge, trailing edge or universal dimming actuators that recognize the connected load type and automatically activate the correct type of control. TIP:Install a few more lights in the room and use a dimming actuator to create a pleasant lighting ambience. KNX dimming actuators are available for installation in the electrical distribution system, then they have the suffix 'REG' for modular installation devices or as a concealed version 'UP' for installation in a mounting box or junction box or as an installation version 'EB' for integration in ducts or similar. 230V halogen lamps or incandescent lamps, for example, can be operated with both types of control.What is the difference between leading edge dimming and trailing edge dimming?Very simply explained; 12V low-voltage lighting (NV) with a conventional iron-core transformer requires phase control dimming, although these transformers are hardly ever used. 12V low-voltage lighting (NV) with an electronic transformer requires trailing edge dimming.The type of dimming of the dimming actuator can be recognized by the abbreviation 'RL' for trailing edge dimming for incandescent lamps, 230 volt halogen lamps and the abbreviation 'RC' for trailing edge dimming for incandescent lamps, 230V high-voltage halogen lamps, 12V low-voltage halogen lamps, dimmable LEDs and dimmable ones energy-saving lamps. It is also possible that both abbreviations 'RC' and 'RL' can be found printed on the dimming actuator. Often you will also find this imprint: 'R, L, C'. It designates which equipment the dimming actuator can work with (dimmer, transformer, LED). If you find all 3 letters or the abbreviations 'RL' and 'RC', then it is usually a universal dimming actuator.Image: KNX LED universal dimming actuator - Jung 390041SRIn this case, however, the limit values of the power ranges for each type of dimming with connected equipment must be observed. Dimming actuators often have minimum loads, which may not be suitable for the use of LEDs. Trailing edge dimming 'RC' (trailing edge control) is the most common application. Basically, the lamp and the dimmer must be marked as 'dimmable' and fit together. TIP:For LEDs, we always recommend LED dimmers or LED controllers, which have also been developed for exactly this application. If in doubt, you can also contact the manufacturer of the dimming actuator directly if you send a data sheet for the equipment (lamps and, if applicable, ballasts).Can I dim a fluorescent lamp? Are energy-saving lamps dimmable?Yes, fluorescent lamps and energy-saving lamps can also be dimmed, provided the lamp is suitable and marked as 'dimmable' or, in the case of fluorescent lamps, there is a dimmable electronic ballast (EVG) for 1-10V or the DALI standard. You can find KNX dimming actuators for electronic ballasts with a 1-10V interface under Smart Home > Light control unit. Another standard for electronic ballasts is DALI (Digital Addressable Lighting Interface). The advantage over the 1-10V variant is that addressing is possible and there is no wiring according to groups. Further advantages are direct addressing, status messages, scene memory and a wide range of dimming options with the DALI ECG.How do I find out if my lamp / luminaire is dimmable?Basically, the light source used should first be checked to see whether it is dimmable. You can find this marking in the item description or on the packaging. Lamps that have already been planned and fitted with light sources must be checked for dimmability and the type of control with the control gear used.How do I determine the power for my dimming actuator?It must be clear which light groups are to be switched and dimmed together and how high the total output (W/VA) of the group is in order to select the appropriate KNX dimming actuator with regard to the required maximum output, the minimum load and the number of channels as well as the type of control Find. eibabo always recommends a thorough analysis of the application prior to purchase. Lamps and illuminants must be technically analyzed and checked against the technical data of the dimming actuator. In addition, there are countless different parameter properties of KNX dimming actuators between the manufacturers.Why can't I dim my LED light?All dimming actuators meet the standard requirements for dimming. In addition, many manufacturers offer additional interesting parameters. These parameters may be functionally important for your project. The marking KNX universal dimming actuator does not automatically mean that these dimming actuators are also suitable for dimming the LEDs you use.  Catalogue content:In this eibabo® catalogue Installation bus systems > Dimming actuator for bus system you will find items from the following product groups:Item overview:ActuatorBasic moduleBinary inputBrightness controlBus technologyControl blockControl unitDimmer plugDimming actuatorsDimming extensionDIN railEnergy efficientExpansion moduleFan driveFunction moduleLight controllerLightbulbsLightingLighting technologyLuminaire controlOutput moduleRadio controlRadio receiverRetrofit lampsSocket coverStarter packUniversal dimmerUniversal dimming actuatorfrom the following manufacturers:Manufacturer overview catalogue Dimming actuator:ABBBerkerBusch JaegerEatonElsoEltakoESYLUXFinderfrogblue AGGiraHagerIssendorffJungLegrand BticinoLegrand SEKOLingg & JankeMDTMean WellMertenPehaSchneider ElectricSiemensThebenWielandZumtobel
Switch actuator - Do switch actuators only differ in the number of channels? If you would like to know what you should consider before buying a switch actuator, we have put together some helpful information for you in the following article. The possibilities are therefore very extensive and actuators from the eibabo® range take on very central control and switching functions. But what exactly does that mean? We clarify.Briefly summarizedSwitch actuators are components of modern building automation.You can plan these in the new building, retrofit them in the old building and use them flexibly if you are renting.It is possible to digitally network and switch almost all devices and components of building technology.Switch actuators are parameterized with the standardized ETS software.Private areas of application are, for example, switching operations on lamps, sockets, household appliances, entertainment devices and kitchen appliances.In the commercial sector, for example, you switch access systems, escalators, revolving doors and so on.   How does a KNX switch actuator work?Every bus system consists of actuators and sensors. KNX actuators are active switching elements or drive elements and are comparable to a conventional relay in which the coil is intelligently controlled by bus signals. This converts analogue or digital input signals into switching commands or drive commands. The KNX switching actuator also has its own intelligence in the form of a controller, the so-called 'KNX bus coupler'. You can recognize this controller by the red/black clamp.What types of installation are available for KNX switching actuators?KNX actuators are often also referred to as actuators or binary outputs. A distinction is made between classic switching actuators, dimming actuators, blind actuators, roller shutter actuators, heating actuators, analogue actuators and many others. There are actuators for installation in the electrical distribution, then you have the suffix 'REG' for modular installation device. Flush mount versions are labeled 'UP' for mounting in a mounting box or junction box. As a built-in version for integration in ducts or similar, 'EB' is specified as the mounting type. However, additional protection must also be taken into account for built-in versions depending on the installation.The advantages of switching actuatorsEverything under control ? anytime and anywhere. Single-family houses or apartment buildings, an office building or other real estate can have complex structures. With switching actuators, you simplify the organization of recurring processes and at the same time ensure that nothing is forgotten, no errors occur and, ideally, time and energy are saved. For example, you can adapt your building's access system to office hours or make the heating output dependent on the prevailing outside temperature. Or use the option of being able to operate doors, gates or windows at the same time. This ensures safety, especially in commercial properties, and saves the facility manager a great deal of time. All switching actuators work efficiently and silently. You are free to choose the type of control. This can be done via buttons, remote controls, voice controls, via the Internet or using a smartphone app.Classic application examples in everyday lifeAllow tradesmen access to the building even when you are not on site. Automatically open all escape routes in case of danger or control your children's TV times. In conjunction with motion sensors or presence detectors, doors can be opened and closed or security lighting activated. As you can see, with a little creativity, the possible uses of a KNX switching actuator are almost endless.Image: KNX switch actuator ? Eibmarkt SA.12.16In order to be able to use this potential optimally, it is necessary to know the extensive technical requirements. Which switching actuator do I need for my project and how do I avoid purchasing an unsuitable switching actuator? At eibabo® you will find actuators from brands such as ABB, Berker, Busch-Jaeger, Eaton, EIBMARKT, Eltako, Gira, Hager, Jung, Lingg & Janke, MDT, Merten, Siemens and Theben. Depending on their specifications, they are used for various automation systems. More detailed information can be obtained directly from the product. All KNX actuators offered by eibabo® are of the highest quality and can be purchased by both private and corporate customers. Delivery is worldwide.What questions should I ask myself before starting the project?Do I install one device or several?Will more devices be added later?What electrical loads and types of loads can be expected, especially when switching on?How should the control be operated - via app, voice and / or button?Are the devices switched individually or in groups?Which logic should the switching actions follow?and much more... ...accordingly, I have to consider the following thingsthe suitability of the planned or already installed cables and linescircuit protectionthe space required in the electrical distribution systemthe type, number and distribution of control elements ? for example buttonsand much more... Which KNX switching actuator do I need for my project?KNX actuators can be single-channel or multi-channel. For this reason, actuators can switch at least one or more different equipment such as lights, sockets or motors. There are also decisive differences between the manufacturers with regard to the software / application and the technical application. These include, for example, the integrated logics (e.g. staircase lighting function, delay functions, logic functions), the load capacity of the switching channels (6A, 10A, 16A) and the load type (resistive load, inductive load or capacitive load).Each switching actuator is optimized for its respective area of application. The tasks of a heating actuator, for example, are linked to different parameters than those of a universal switching actuator. Everyone has their specific application / software. This eibabo® catalog is about the classic switch actuator. For additional information on heating actuators, shutter actuators or dimming actuators, please use the search function in our shop. NOTE:The application (software) of each actuator determines its special properties. There are also differences in terms of functionality and expandability. Some models are designed as switch actuator main modules. These can later be supplemented with switching actuator extensions via jumper plugs and thus flexibly adapted to loads to be switched in the future.recommendationDownload the descriptions and the application for the desired actuators from the manufacturer's website and compare the specifications.Good planning is therefore a prerequisite. Only when you know what you want to switch with the required actuator can you choose a device that best meets your needs.Is the resilience of an actuator important?When selecting the right actuators, you should pay attention to the required loads on the one hand and the desired functional options that an actuator can offer on a manufacturer-specific basis on the other. Under no circumstances should you, for example, use an actuator with a maximum load capacity of 6A resistive load and 3A for capacitive loads for switching fluorescent lamps with electronic ballasts, since these devices have very high inrush currents (up to 100 A for 3-5ms) for a short time. This can lead to the contacts sticking together. For such loads, it is advisable to use C-load actuators.Does it make sense to use a very heavy duty actuator for very light loads?Please try to select the performance of your actuator as precisely as possible based on your needs. Very low loads on very heavy-duty C-load contacts can lead to wear because the self-cleaning effect no longer occurs. Actuators with a high load capacity of the channels also often require more robust relays with audible switching actions. This should be taken into account in particular when electrical distribution boards are installed in the vicinity of living spaces. TIP:Always choose a switching actuator with regard to its performance to match the respective installation. This protects the technology and extends the service life. In the smart home area, multi-channel 10-16 ampere actuators for resistive loads are used most frequently.Can I connect different phases to the KNX switching actuator?Yes, you can connect different phases to the switching actuator, provided each channel is available separately on the device. In the case of devices with separate potential-free switching contacts, the different phases can be switched next to one another. Different residual current circuit breakers per channel are also possible. In contrast to this, however, operation with different voltages within an actuator is by no means permissible.How do I define the individual switching parameters on the switching actuator?At this point, many interested parties become pensive and begin to doubt whether they can 'program' a switching actuator themselves. It's actually not that difficult. The Engineering Tool Software (ETS) required for this is not really used for programming, but only the group addresses and parameters are assigned to the device.What does ETS mean for KNX?The engineering tool software is a necessary tool for configuring the functions when commissioning KNX devices. The software is only used for parameterization and can also be understood by laypersons with an interest in the logic of the KNX.Programming knowledge is not required and you do not need to know any programming language. If you are interested in the rather simple logical connections of the KNX bus, you are quite capable of creating a project. Of course, more complex concepts require a certain amount of experience. We always recommend having the basic project created by an experienced system integrator. This gives you the option of later changing important parameters yourself very easily if this becomes necessary due to changes in everyday life.What is the difference between binary input and binary output?Switch actuators are also referred to as binary outputs. This designation is not wrong, because these are components that actually switch the connected electrical equipment like a classic light switch - often centrally in the control cabinet. Binary inputs, on the other hand, do not switch the current, but only pass on the signals from conventional operating devices to the KNX system for further processing in a logic module or other KNX participants.  Catalogue content:In this eibabo® catalogue Installation bus systems > Switch actuator for bus system you will find items from the following product groups:Item overview:Adapter plugBasic moduleBlind controlCommand devicesDrive controlElectric infrared heatingEnergy measurementGarage doorHand controlLatching switchOutdoor areaRadio controlRadio systemRelay switchResponse delayShutter outputShutter switchSocket coverSplash proofStaircaseSun protectionSwitch socketSwitching actuator moduleSwitching deviceVentilation controlWipe-offWipe-onWireless switching outputfrom the following manufacturers:Manufacturer overview catalogue Switch actuator:ABBBerkerBusch JaegerEatonEberleEIBMARKTElsnerElsoEltakoESYLUXFinderfrogblue AGGiraHagerIssendorffJungLegrand SEKOLingg & JankeMDTMean WellMertenPehaRutenbeckSchneider ElectricSiemensThebenVaillantWaremaWielandZumtobel
Room temperature controller - When building a new house or renovating, you have numerous interesting options for organizing the control of the room temperature. We will tell you how you can use various bus systems such as KNX, radio or LCN in addition to the conventional temperature setting. Automation not only increases living comfort, but also contributes to the value of your building. This enables you to make necessary adjustments or changes even when you are not at home. This eibabo® catalog provides room temperature controllers for all common applications.What are KNX room temperature controllers?KNX room temperature controllers are part of a building's heating system. These are used for individual room temperature control of interior rooms and have various measuring ranges. The respective devices can differ significantly in terms of application and the functions provided for operation and comfort. For example, the differences are whether static heating surfaces or underfloor heating are to be controlled or whether air conditioning and ventilation functions are to be provided.Do not confuseThermostats are also known as room temperature controllers. Installed on radiators, however, they measure the temperature at the heating and usually only differentiate between on and off.KNX room temperature controllers, on the other hand, continuously control between 0 and 100 percent and use a heating actuator to communicate with the heating actuators.How is the room temperature controlled using KNX?A KNX room temperature controller determines the control difference between the target temperature and the actual temperature. The calculated control difference is sent as a 1-byte command value telegram (a value between 0 and 100 percent) via the KNX bus to the corresponding channel of a heating actuator. This processes the signal and then controls the actuator.The following small example illustrates the rough functionality. The actual manufacturer specific control algorithm may be different:The room temperature controller determines a current temperature of 18 degrees Celsius (controlled variable). However, the desired room temperature should be 22 degrees Celsius. The 22 degrees Celsius then represents the setpoint for the controlled variable. The resulting difference between the actual value and the setpoint is the control deviation. The control difference is 4 degrees Celsius and is used to determine the control variable that is to be used to influence the room temperature. Assuming the manipulated variable is 25%. This value is transmitted as a 1-byte telegram (0-255 = 0-100%) from the room temperature controller to the heating actuator. In this case 63.75. For example, the actuator takes 2 minutes to fully open. The time required for the respective actuator to open or close can be found in the data sheet for the thermoelectric actuator. This information must have been previously stored in the parameters of the actuator using Engineering Tool Software (ETS). With a command value specification of 25%, the actuator would switch on the actuator for 30 seconds (this corresponds to 25% of 2 minutes) and switch it off for 90 seconds. The actuator then switches on again for 30 seconds and so on. If the room temperature controller calculates and transmits a different command value specification, the switching cycle for the actuator also changes.Image: Gira 210003 KNX continuous controllerWhat is the difference between KNX continuous controllers, KNX object controllers and KNX room temperature controllers?The selection of KNX temperature controllers is very large. eibabo® offers products from all leading manufacturers of control technology for HVAC (heating, air conditioning, ventilation) in smart home automation. These include ABB, Berker, Busch-Jaeger, Eaton, Elsner Elektronik, Eltako, EIBMARKT, Gira, Hager, Issendorf, Jung, Lingg & Janke, MDT, Merten, Siemens, Theben and Thermokon. Many of these manufacturers use different designations, such as KNX continuous controller, KNX object controller or KNX room temperature controller.KNX room temperature controllers continuously record temperature values and forward them to other system components as KNX signals that can be evaluated. This process takes place continuously. A KNX continuous controller is therefore the same as a KNX room temperature controller. The situation is different with a KNX object controller. Object controllers are room temperature controllers without direct adjustment options on the device for the setpoint temperature. Object controllers were developed for object use. In public objects, as a rule, direct adjustment by strangers should be prevented. The values are parameterised directly via the ETS (software). You can change these directly via KNX (KNX buttons, KNX operating panels, KNX visualisations) in the setpoints. KNX object controllers are often cheaper and suitable in private areas for corridors, basements or storage rooms.What do you have to consider when positioning a KNX room temperature controller?As a rule, the installation is carried out using a branch switch box with 4 screw bosses, one switch box deep. Alternatively, use an electronics box if a separate bus coupler is required. With our convenient search function, you can quickly find the right items here in the eibabo® technology store. TIP:There are multi-channel KNX room temperature controllers for installation in your electrical distribution. Here, the temperature is measured via separate KNX sensors, for example from KNX buttons or KNX motion detectors with an integrated temperature sensor. For optimal use of all functions and the best possible recording of the measurement data, please ensure that the installation height is 1.60 m from the top edge of the finished floor. In this way you ensure optimal control and user-friendly handling.How is a room temperature controller connected to the KNX bus?KNX room temperature controllers are equipped differently by the manufacturers. You can either buy the KNX room temperature controller including a bus coupler or you have to order the bus coupler separately. The required interface between the KNX bus and the KNX room temperature controller is called the bus coupler. You can tell whether your controller has a bus connection by the red and black bus terminal. The KNX controllers often offer included KNX binary inputs. These are used, for example, to integrate conventional buttons in the room to switch lights via KNX. These binary inputs usually correspond to the technical data of KNX push button interfaces and can therefore only be extended up to a maximum of 50cm.How important is the appearance of a KNX room temperature controller?There are controllers with or without a dial to adjust the temperature. Other models are operated via the display and menu controls. Everything is possible here. The controls should match your other switch range and reflect your modern, classic, simple or extravagant style of living. TIP:Don't just look at the exterior of a KNX room temperature controller, but also at its inner values. There are often considerable differences in the application developments (software) of the manufacturers. The possibilities that the respective software can offer you may be relevant to your project requirements. Think of:control behaviorInfluencing control processesOperating modes and external switching options or setpoint adjustment optionsstatus feedbacknumber of group addressesBehavior in the event of a bus voltage failureand much more What other properties should I consider before buying a KNX room temperature controller?In addition to the technical, optical and software properties mentioned, other factors can speak for or against a specific model.Do I need anti-theft or dismantling protection?What color or what material do I want for the control panel?Do the local conditions require wireless data transmission?Should it be regulated via a room controller?and some more What are room controllers with integrated KNX room temperature controller?An alternative to the KNX room temperature controllers presented here are the KNX room controllers, provided they have an integrated temperature controller. These are devices that you can use to centrally control lighting, temperature and blinds, for example. Such controllers can be used via individually assignable control panels for switching, dimming, regulating or controlling all required actuators and sensors. You can also get numerous high-quality KNX room controllers here in the shop at top conditions. Use our intelligent search for your research.  Catalogue content:In this eibabo® catalogue Installation bus systems > Room temperature controller for bus system you will find items from the following product groups:Item overview:Building system technologyBus technologyButton interfaceClock thermostatContinuous controllerControllersEnd stripsEnergy efficientHeating controlHeating technologyHome controlHumidityMoellerfunkMoisture meterMultifunction displayNetworkingObject controllerRadio systemRadio transmitterRemote room sensorRoom controllerRoom sensorRoom temperature controllerRoom thermostatTemperatureTemperature controllerThermostatWireless temperature sensorfrom the following manufacturers:Manufacturer overview catalogue Room temperature controller:ABBAlre-itBerkerBusch JaegerEatonEberleElsnerElsoEltakoGiraHagerJungMDTMertenSiemensTheben
Blind actuator - How can I automate my shutters and blinds? Can the time of day, the weather and the position of the sun be taken into account? We provide recommendations and information on the purchase of KNX blind actuators and show you what options the technology offers you in everyday life.If you want to build a new house or renovate an existing building, many questions arise. The technical equipment in particular must be well thought out, because a later change is then only possible with a lot of effort. If you already include the advantages of intelligent building automation in your planning, then the opening, closing and shading of the windows will also play an important role.Useful application examples for controlling blinds or roller shutters:the up and down of roller shutters and blinds according to time specificationsturning the slats of blinds based on the brightness in the roomthe automatic opening of roller shutters or blinds when windows are openedthe simultaneous operation of several shading systemsthe flexible control or regulation of the roller shutters when you are absent via a smartphone appthe automatic drive to the safety position in the event of a storm alarm and back after the all-clearthe blocking of operation for certain peopleautomatic shading according to geographic location and position of the sun (astro control) The use of modern KNX blind actuators supports you in realizing all these projects. They ensure more security, greater comfort and increase the value of your property.  What distinguishes a KNX blind actuator from a KNX switching actuator?All motorized equipment such as blinds or roller shutters can be automated using KNX blind actuators. Standard 230V blind actuators therefore have 2 channels per switching output. A channel to drive up and a channel to drive down. The channels are mutually locked to prevent damage to the drive. So only one phase can be switched through to the drive at a time, never both at the same time. TIP:Never use KNX switching actuators to control blinds and shutters without a downstream isolating relay. With classic KNX switching actuators, the channels are not mutually locked. It would therefore be possible to connect more than one phase to the drive. This can quickly lead to damage to the technology. There are models which, depending on the configuration, can be used both as a switching actuator and as a shutter actuator. Please read the specification of the respective actuator.What should be considered during installation?Motorized 3-point drives must not be connected in parallel. Group formations may only be carried out using isolating relays or group control devices if the manufacturer does not provide for any isolating function. For example, for 4 windows, each with a drive, you should use a KNX blind actuator with 4 channels. There is also the option of operating several drives via one channel using conventional isolating relays. The shutter actuator channel then controls the isolating relay and the drives are connected to the isolating relay. In the meantime, however, the prices for the KNX actuators have fallen massively, so that there is hardly any need to reduce costs by using isolating relays. TIP:When selecting your components, always prefer one blind actuator channel per blind motor. For example, if you would like to integrate 6, 8 or 12 blinds into your system, you will find the appropriate actuator here in the shop.Are blind actuators with 230V AC better than models with 24V DC?This question is not about better or worse. Rather, the type of voltage of the drives should always be considered. The drives of blinds or roller shutters are often designed as 230V AC (alternating voltage) or 24V DC (direct current). That's why you have to buy the matching blind actuator or roller shutter actuator. A 24V DC blind actuator or roller shutter actuator has a plus and a minus connection. A suitable KNX actuator generates the direction of travel (up/down) by changing the poles (pole reversal).Do shutter actuators require a separate power supply?The 24V DC mains supply is not provided by the actuator and must also be installed externally depending on the power requirement for simultaneity (central commands). In this case, very large power supply units can become necessary, which, in addition to high costs, also require a large amount of space. If you can, order 230V AC drives and matching 230V KNX blind actuators from the supplier. These also require their own power supply, but no additional power supply units.That is the reasonSo-called monostable relays are installed in the shutter actuators, which are open and not active when idle. However, the relays continuously require energy as long as they are closed (e.g. for the duration of a blind movement). The bus voltage alone cannot cover this requirement.In contrast, there are bistable relays in classic switching actuators. These only require some energy in the brief moment of switching from one position to another. This can be implemented via the bus and an additional power supply is usually not necessary.What do I need an SMI KNX blind actuator for?SMI stands for 'Standard Motor Interface' and is an intelligent, uniform and manufacturer-independent interface in building automation. This is used to connect various operating resources, such as window drives, roller shutter drives or blind drives to a higher-level building management system. There are SMI KNX blind actuators for drives with an SMI interface. These intelligent drives are therefore able to exchange data telegrams across manufacturers.Which actuators are recommended for controlling roller shutters and blinds?eibabo® carries KNX blind actuators, KNX roller shutter actuators and KNX SMI actuators from ABB, Berker, Busch-Jaeger, Gira, Hager, Issendorf, Jung, Lingg & Janke, MDT, Merten, Siemens, Somfy, Theben, Warema and many other manufacturers.Over 25 years of experienceAll actuators that you get here in the shop are of high quality and reliable. We regularly use these actuators in our projects all over the world.Benefit from our low prices and take advantage of safe, fast and worldwide shipping.1-byte communication object - what is that?In any case, make sure that your blind actuator or roller shutter actuator has a 1-byte communication object for the runtime and slat, in order to be able to enable automatic or targeted control if required.There are no slats in roller shutters, which is why roller shutter actuators do not have the slat communication object, only Up/Down/Stop. Roller shutter actuators often have a 1-bit object for a defined positioning movement that can be set via the ETS software.1 byte means that values between 0-255 can be approached, which correspond to 0-100% related to the travel time. The parameters often allow the running time to be set according to the driving time. The travel time of the blind or roller shutter is entered once in the actuator using the ETS software, namely for a complete opening or closing for each channel of the actuator. There are also actuators for evaluating limit switches, which the motorized drive provides.Image: KNX blind actuator ? Eibmarkt JA.6.230The extensive application of the KNX blind actuator / roller shutter actuator JA.6.230 from Eibmarkt® shown here enables a wide range of parameterization via the communication object, including scenes for runtime and slats, blocking functions, automatic functions, security functions and alarm functions, movement limitations, position feedback and much more.Can a layperson use the ETS software to program the KNX devices?Don't be put off by the term 'programming'. The ETS software is only used to assign and parameterize certain actions. Programming skills or learning a programming language are not required. If you have some imagination to understand logical connections, then you are quite capable of creating a project.our recommendationFor more complex projects, a certain amount of experience is of course helpful. Have the basic project created by a qualified system integrator. In this way, you will later be able to easily change important parameters yourself if circumstances require it.Roughly explained: Imagine the folder system on your Windows PC or iOS computer. Here you create your own structure, save files in it and create links to other folders. This is similar with the ETS software. The 'folders' can be floors or rooms and the 'files' in them are the sensors or actuators of the respective room or electrical distribution cabinet, which you then link to one another.What types of installation are there for KNX blind actuators?KNX blind actuators are available for every type of installation at eibabo®. For example, for installation in the electrical distribution, then these carry the suffix 'REG' for series installation devices or as a flush-mounted version 'UP' for installation in a mounting box or junction box or as a built-in version 'EB' for integration in ducts or similar. However, additional protection must also be taken into account for built-in versions depending on the installation.  Catalogue content:In this eibabo® catalogue Installation bus systems > Shutting actuator for bus system you will find items from the following product groups:Item overview:Azimuth controlBinary inputBlind functionBuilding controlBuilding system technologyCable entryCombination actuatorControl moduleControl unitsDIN railDIN railsDrive controlEngine control unitEngine controllerHome controlInput moduleLight domeNormally open outputOutdoor areaOutput moduleRadio receiverSeries installationShutter controlShutter outputShutter switchSplash proofSun protectionVentilation flapfrom the following manufacturers:Manufacturer overview catalogue Blind actuator:ABBBerkerBusch JaegerEatonEIBMARKTElsoEltakoESYLUXFinderGiraHagerJungLingg & JankeMDTMertenPehaSchneider ElectricSiemensSomfyThebenWaremaWieland
Tactile sensor - Smart, individual, simple, extravagant, futuristic - touch sensors, also known as KNX buttons, like to attract admiring glances and their modern design alone suggests to every user that this is more than a conventional light switch. Rockers, glowing LEDs, small symbols or even LCD displays give an idea of the numerous functions hidden behind many an installation. In addition, there is often a very noble selection of materials such as high-quality metal, acrylic or glass, which always exudes a touch of extravagance. But why are multifunctional touch sensors needed and how do you use their potential optimally? We give you a brief insight here.The basics in a nutshellTouch sensors are multifunctional control elements for the smart home.The design and function selection is huge, from a single button to a control center with 12 or more buttons, everything is possible.You can use it to control, for example, the light, its dimming, blinds, heating, entertainment center, door opener and all other devices in your home network.The button functions can be assigned individually and can be easily reprogrammed if necessary.Integrated LEDs or other displays often show the respective operating status or provide information about errors.   What is a touch sensor or a KNX button?You can operate the end devices integrated in your smart home network with a touch sensor or a KNX button. This can be blinds that you can raise and lower - light that you dim - the heating that you regulate or completely individual, user-defined scenarios. Depending on the model, operation is optically individual. In general, it is operated using a different number of buttons or rocker switches and/or even displays.The different types of KNX buttonsUsing a KNX universal button interface, you can basically turn any conventional button into a KNX button. These interfaces are installed in a deep device box behind the standard button and thus take on the task of the binary input, which converts the classic switching processes into KNX signals.Which doses are suitable?To do this, use a branch switch box with 4 screw domes or a deep switch box or an electronics box. Use our eibabo® search to quickly find the right item.This solution is particularly suitable for the standard application 'basic lighting' per room (see: 'What are standard applications?') or for the modernization of existing installations as well as for inexpensive and functionally manageable system extensions.'Real' KNX tactile sensors are much more complex and range up to control elements with elegant touch displays. Temperature sensors, LED displays and background lighting are often already combined in one device. In contrast to the simple interface variant, there is often the option of providing each key with additional functions, which are then triggered, for example, by a long press, double-click or even triple-click. TIP:We recommend planning well in advance so that you can later fit all the functions you need into your keypad. While some KNX push-button sensors require a separate bus coupler to which they are plugged, the bus coupler is already integrated in others. The eibabo® technology store also has both complete KNX pushbuttons and pushbutton sensor modules. The latter is 'only' about the technology and you can choose a matching design cover yourself. The possibilities are diverse - you can choose exactly what suits your project.The advantages and disadvantages of tactile sensorsThe central control of a large number of actions on different end devices is certainly the greatest advantage. The plus in comfort is combined with the flexible options for changing and expanding a well-planned setup. The disadvantage is certainly the slightly higher acquisition costs of a smart home solution compared to a conventional electrical installation. In the case of units with many keys and each assignment with different control variables (print, double-click), the overview of all the functions and their control can easily be lost.Unusual application examples in everyday lifeWe have already mentioned a few classic use cases. In the course of our more than 25 years of work, we have also been able to implement 'very special' projects. It starts with the smart opening and locking of the cat flap in the basement, continues with the choreographed lighting of exterior facades and doesn't end with the automatic pool cover, the fully automated aquarium or the heated driveway in winter.  You want to know more? We answer frequently asked questions.Nobody knows everything and sometimes there are small ambiguities that prevent us from correctly grasping connections or from deciding on one or the other product. You may also find an answer to your question in the following topics.How are the KNX devices programmed?Many interested parties are quickly startled by the term 'programming', but it's not that difficult at all, because it's not actually programmed with the 'ETS', but assignments and parameterizations are carried out.What does ETS mean for KNX?The term ETS (Engineering Tool Software) means that it is programming software for commissioning the KNX devices. The tool is more of a software for parameterization and basically also suitable for laypersons with an interest in the logic of the KNX.No programming knowledge or programming language is required. If you are interested in the rather simple logical connections of the KNX bus, you are in a position to create a project. Of course, more complex projects require a certain amount of experience. We always recommend having the basic project created by an experienced system integrator. This allows you to easily change important parameters yourself later on, since many things change in the life cycle.Which touch sensor or KNX button should I buy?Well, we can't give a general answer to this question, but we can perhaps provide some impetus for decision-making. KNX push button sensors are available in a variety of designs. The manufacturers offer solutions for every taste. However, you should not only be guided by the optics. In addition to the optics, eibabo® also recommends checking the applications (parameters and functions) provided by the manufacturer for the ETS (Engineering Tool Software). Significant deficits can open up here in the course of a project if the beautiful button were not able to control the necessary actions correctly. Plan exactly which requirements you place on the respective push button sensor and then select a suitable model accordingly. NOTE:ETS is standardized software for commissioning the KNX devices and can be obtained from www.knx.org. With regard to the design, you should also rely on optics that have a positive effect in the long term and not follow every short-term trend, only to realize a few years later that the brightly colored displays and the LEDs for various status messages on the buttons in the wall were a bit too much of a good thing. It makes sense to ensure that displays can be dimmed or configured in different brightness levels and status LEDs can be configured and switched off. A timeless surface design, for example, has simple elegance, looks classy, is durable and has no playful rockers that could quickly gather dust.How do I recognize whether a touch sensor already has a bus connection?Some touch sensors already have a bus connection. If you're not sure, a look at the back will clarify.Image: KNX push button sensor - Jung 4047TSMA touch sensor is equipped with a bus coupling if it has a black and red (or gray and red) terminal for the bus on its back. This 4-wire terminal with plug-in terminal connection serves as a distributor for up to four KNX lines.How do I keep track of the individual functions of complex touch sensors?We would like to encourage you to think: Imagine you come into a room and have to press the small second rocker from the top left on an 8-way pushbutton sensor every day to switch on the basic lighting. It can quickly happen that you accidentally set the pressure point on the adjacent rocker and unfortunately operate the blinds at 11:00 p.m. Not to mention how a guest or child is supposed to cope with it.So it can indeed be a bit difficult to always steer correctly. But: The advantages of the KNX lie in the intelligence of the system, which is implemented by the system integrator based on their experience and your functional requirements. For this reason, you should arrange functions logically or thematically and, if necessary, group them on easy-to-use buttons. If necessary, it is advisable to divide standard applications and detailed circuits into different buttons at different mounting heights.What are default applications? What is the best way to implement this into the system?The first switch box is usually placed on the 1.05m upper edge of the finished floor. At this point you should mount a conventional double button and connect it twice to the bus via a very inexpensive KNX button interface. Of course, you can also mount 2 or 3 double buttons and integrate a 4-way or 6-way KNX button interface. A deep switch box or electronics box is installed as a flush-mounted box in order to be able to place the small button interface behind the double button.Here you save!Combine a KNX button interface with a conventional double button.With the conventional double button, you have more choice in the design of the switch range and, in the event of defects or design changes, you can obtain a lifetime replacement without having to reprogram. You can assign the most important and most frequently used basic lighting to this button or parameterize the button or the button interface with light scene recall. A beautiful flat switch is also very easy to use for guests and children.What is meant by detailed switching on the KNX button?You should mount detailed circuits of the certainly many functions in a room on the 1.60m upper edge of the finished floor and call them up from a room controller or multiple push-button sensor with an optionally integrated room temperature controller (see also our multiple control unit catalogue). A room temperature controller already requires this mounting height for optimal control. At this user-friendly height, you can then carry out all additional controls for additional lighting, blinds, roller shutters, entertainment, etc.Touch sensors wear out very quickly! Is that correct?Like all other technical components that are used more or less every day, tactile sensors and control points in general are subject to a certain amount of wear and tear. However, this is no different than with conventional buttons or switches. It is possible that individual parts that have been in use for a decade are then worn out.Does it make sense to control the heating using touch sensors?Definitely, as a rule, individual room heating controls are also required for KNX installations. In terms of value for money, the combined buttons with room temperature controllers are the best choice, also in terms of user-friendliness.Which manufacturer offers the most beautiful and best KNX buttons?Beauty is in the eye of the beholder, we won't take a position on that. In terms of quality, however, all brands perform very well. There is no such thing as the 'best' touch sensor. Each manufacturer has its individual strengths in terms of applications (parameters and functions). eibabo® offers switches from all brand manufacturers (from ABB, Berker, Busch-Jaeger, Gira, Hager, Jung, MDT, Merten to Siemens). Select KNX push-button sensors in the following versions: KNX push-button sensor, KNX sensor unit, KNX wall sensor, KNX room control unit, KNX push-button sensor module, KNX push-button sensor extension module, KNX push-button 1-fold, KNX push-button 2-fold, KNX push-button 4-fold, KNX push-button 5-way, 6-way KNX button, 8-way KNX button, KNX control panel, KNX button with bus coupler, KNX button module, KNX touch sensor, KNX button sensor plus, KNX glass button.  Catalogue content:In this eibabo® catalogue Installation bus systems > Touch sensor for bus system you will find items from the following product groups:Item overview:Adapter frameBuilding controlBus couplerBus technologyButton couplerCabel CanalColor displayContactlessControl elementGlass buttonGlass sensorGroup button bus couplerLight scene touch sensorsNickel metallicOutdoor areaPendulum fanReceiving sensorRemote controlRemovable fanShutter buttonSingle rockerSplash proofTactile sensorsTemperature sensorTitle blockTouch sensorWireless pushbuttonWireless solutionfrom the following manufacturers:Manufacturer overview catalogue Tactile sensor:ABBAVM ComputersystemeBerkerbticinoBusch JaegerEatonElsnerESYLUXGiraHagerIssendorffJungLingg & JankeMaicoMDTMertenRopagSiemensTheben
Multifunction socket - In fact, nowadays nothing works without computers, tablets, printers, televisions or other multimedia devices. All these devices accompany us through everyday life and we use them constantly and everywhere. But they have to be connected to the power supply or a data network permanently or at least from time to time via a connecting cable. With multifunction connection sockets you ensure that you have the appropriate connection options in all rooms. The range of products that the eibabo online shop offers you ranges from USB and antenna connections to VGA, HDMI or cinch through to DVI or network connections. An interface to the home network is therefore available for each device. We are proud to always be able to offer you good prices and top quality and are pleased that you are expressing your trust in us with your purchase.Catalogue content:In this eibabo® catalogue Data and telecommunication > Multifunctional connection box you will find items from the following product groups:Item overview:AP socketAppliance connection boxBuilt-in junction boxCATV canChannel socketCombination canCommunication connection boxCommunication socketComposite canDevice junction boxFloor tank boxFlush-mounted junction boxFlush-mounted socketIAE/UAE 8 (6)-TAE 6 F+NModular boxMultifunction junction boxMultifunctional connection boxMultimediaMultimedia connection boxSocketSocket outletSurface-mounted junction boxTelecommunication socketTerminal boxTriple play canUnderfloor boxWall outletWall socketfrom the following manufacturers:Manufacturer overview catalogue Multifunction socket:Astro StrobelCommScope EMEAEthermaHomewayJungKleinhuisKontaktsysteme
Housing - on-wall-ceiling - Do you want to bring together several electrical cables for your electrical installations? In this catalog you will find housings that have been developed for mounting on a wall or ceiling. These are mainly referred to as junction boxes, junction boxes, connection boxes, distributor boxes or, according to German standards, as installation boxes. Find out here what the differences are between the individual installation boxes and which criteria are relevant when purchasing.With eibabo®, you can choose exactly the installation boxes that are best suited to your project from a comprehensive range. These are also referred to as passive components of an electrical installation and, in contrast to switch boxes, are mostly installed on plaster. Due to their design, these are designed for stationary installation and for accommodating cables, lines, clamps and other connections. We carry housings with strain relief lugs for pendant lights and external mounting lugs. You will also receive housings with high resistance to the effects of weather. These are impact-resistant, protect against rainwater and are also resistant to changing temperatures and seawater. Housings with these special properties are approved for installation on ships and for offshore applications.Notice:Always leave electrical installations to an experienced electrician. When working on an installation box, safety always comes first. Disconnect the relevant circuit from the power supply.A high percentage of the junction boxes at eibabo® are kept in classic white and grey. However, you can also find cases in colors like black, green, brown, and red for a more customized use.What do I need installation boxes for?Junction boxes are an essential part of the electrical wiring systems for houses and other buildings. These are made of metal or plastic and protect cable connections, connections and distributions in an electrical installation. For example, if you want to distribute the individual supply line for a room to several lines, the wiring is done in the installation box.How are installation boxes installed?The assembly of the installation boxes is very simple. As a rule, the housings have markings or screw channels on the inside, which you should use to attach them to stable and secure surfaces. Some variants offer external attachment tabs. Make sure that the housing corresponds to the conditions at the place of use, is freely accessible for maintenance work and cannot be manipulated by unauthorized persons. TIP:You can close and seal some installation boxes tightly. External influences can be quickly identified through the viewing window in the cover.  TIP:Based on experience, we recommend that you make the entries for each cable before installing the socket and insert cables as a test. In tight installation environments, it can be difficult to cut out post-inserts or expand existing diameters.How do installation boxes differ?Installation boxes differ mainly in size, material and properties for specific locations. Installation boxes can be made of either metal or plastic. The choice between plastic and metal depends on which cable material is used and which mechanical loads an installation box should be able to withstand. Metal-sheathed cable and metal conduit typically require a metal junction box for grounding. Even if the installation box is exposed to heavy knocks or similar influences in everyday life, a stable metal model is recommended. Plastic housings are the standard choice for non-metallic cables.Special featuresSome models are fire resistant or shielded for use in severe conditions. Installation under the ground, under water or in potentially explosive areas is also possible in some cases.Check the local regulations for your electrical installation. This will tell you if you need to use wall outlets with a specific IP rating. In most cases, your electrician can tell you what IP rating is required.Correct dimensioning of the installation boxThe dimensioning of an installation box is crucial to ensure the function of the internal connections. If you have enough space available, we always recommend using a slightly larger can. Cables and wires are rigid and difficult to bend into shape. Clamps require space. If you choose the socket too small, the space for working on the connections will also be very small and cramped. When determining the size, consider:the number of lines to be installedthe length of the lines for comfortable workthe cross-section of the lines and the associated flexibilitythe number of clamps to be installedany other components in the can  TIP:Do not leave any exposed wires in the installation box. Even if you do not need a wire, please always provide it with a clamp. Always allow for some reserve for changes in the future. On average, installation boxes for commercial use are larger than housings for private households, as these often have to accommodate more connections.Image: Spelsberg Abox 250-L junction boxHow do I find the right installation box?There is a large selection of installation boxes. This ranges from universal installation boxes to special products. You will find the right product if you ask yourself the following questions:Do I need an installation box for commercial or private use?What are the site conditions like? (surface, temperature, humidity, electromagnetism, risk of impact)How much space do I have for installation?What is installed in the can and how much?What space should I reserve as a reserve?Do I want to secure the installation box? (vandalism, unauthorized access, sealing) The answers result in a catalog of properties. You can easily set these as a filter here in the shop. With many secure payment methods, fast delivery and worldwide shipping, the eibabo® technology store is your competent specialist dealer for all questions relating to electrical installation.  Catalogue content:In this eibabo® catalogue Connection devices > Box/housing for surface mounting on the wall/ceiling you will find items from the following product groups:Item overview:Balance boxBox canCable tiesCasting resin boxDevice socketElectrical tapeEquipotential bonding boxFire protection boxFlush-mounted boxFunctional integrityInstallation boxJunction boxesKitchen junction boxMini junction boxMounting baseMounting boxOutdoor lightingPhotovoltaicPower supplySecurity boxShutter driveStrain reliefSurface boxSystem socketTransition boxVideo surveillanceWaterproofWiring boxfrom the following manufacturers:Manufacturer overview catalogue Housing - on-wall-ceiling:ABBBernsteinCeagCellpackDätwyler IT Infra.ElsoEnocGlen DimplexGrotheHeliosHenselIndexaKaiserKleinhuisLegrand BticinoMennekesMertenOBOPehaPentairRittalSchneider ElectricSomfySpelsbergStahlVideosystemsWAGOWeidmüllerWieland
CEE socket - All plug connections approved by us are standardized according to CEE. This applies to the flat Euro plug type C, as it is installed on low-voltage light chains, for example, as well as to the well-known German Schuko plug type F. However, the designations of the CEE plug and the CEE socket actually only have two Plug types enforced. These are the red three-phase 400 V three-phase plugs, which are colloquially also not quite correctly called heavy-current plugs, and the blue single-phase 230 V plugs, which are commonly referred to as camping plugs. So if you do woodturning in your free time, often work with a circular saw or are on holiday in a camper van, then you are probably familiar with the CEE socket. If you need CEE plugs and sockets for your installation, you are sure to find the right models here in the eibabo online shop. In addition to variants with different fastening and moisture protection properties, CEE combi sockets are also part of our extensive range.Catalogue content:In this eibabo® catalogue Industrial socket/plug applications > CEE socket outlet you will find items from the following product groups:Item overview:CE standard plug deviceCEE connectorCEE socketCEE socket outletCEE socket outlet, surfaceCEE standard container socketCEE standard wall socketCEE wall socket (AP)CEEform connectorCEEform container socketCEEform extra-low voltage socketCEEform socketCEEform wall boxCekon connectorCekon connectorsCekon container socketExtra-low voltage socketICEE connectorIndustrial plug boxIndustrial socketPlug boxPower socketReceptacleSocketSocket outletThree-phase connectorWall boxWall socketfrom the following manufacturers:Manufacturer overview catalogue CEE socket:ABBABLBachmannBalsBEGA GantenbrinkElektraMennekesPepperl + FuchsPhoenixSchneider ElectricTehalitWalther
CEE socket combination - At eibabo you will always find your required CEE socket combination, that exactly meets your requirements. We offer a wide range of CEE-socket combinations as block distributions, CEE / SCHUKO (shock-proof) combination, CEE adapters, CEE distributors, Delta-Box and energy cubes as well as FP Connection boxes, suspended socket combinations and suspended connectors, small distributors, cross distributors or socket outlet cases, socket strips or a solid rubber distributor boxes and socket distributors. Our products are available as individual devices, as an accessory, as built-in unit or as empty housing. You will find a large number of combinations of CEE and shock-proof sockets, adapters and distributors. The CEE socket combinations are available as ready-to-use devices. Accessory devices are provided fully wired or as empty housing.Catalogue content:In this eibabo® catalogue Industrial socket/plug applications > CEE socket outlet combination you will find items from the following product groups:Item overview:CE standard rubber combinationCE standard socket cubeCEE power bollardCEE rubber distributorCEE small distributorCEE socket outlet combinationCEE standard flush-mounted socket combinationCEE wall combinationCEE wall socket stripCEEform free-standing distributorCEEform hanging basketCEEform wall socket combinationCekon major distributorCekon rubber combinationCekon socket cubeCombinationDistributorEnergy bollardFlush-mounted distributorFree standing distributorHanging basketPower bollardRubber combinationSocket outlet combinationSocket outlet stripSocket strip for wall mountingWall socket combinationWall-mounted distributorfrom the following manufacturers:Manufacturer overview catalogue CEE socket combination:ABBABLABNApsaBachmannBalsCeagDoepkeElektraElsproGSABHagerMennekesOBOSchneider ElectricSpelsbergSteidele-Stromvert.Walther
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to

1 From 746
No results were found for the filter!
RECOMMENDED
Legrand SEKO - 350621 - AP box Allmetal, 2 modules - Mounting frame for door station 2-unit 350621
$126.48 excl. VAT

*

plus shipping
($234.20 RRP***)
AP box Allmetal, 2 modules - Mounting frame for door station 2-unit
Legrand SEKO
| 350621
RECOMMENDED
3D
Busch Jaeger - 3746 U-101 - Cooker junction box - Appliance connection box surface mounted 3746 U-101
$8.34 excl. VAT

*

plus shipping
($15.47 RRP***)
Cooker junction box - Appliance connection box surface mounted
Busch Jaeger
| 3746 U-101
RECOMMENDED
Legrand SEKO - 350631 - AP box Allmetal, 3 modules - Mounting frame for door station 3-unit 350631
$153.92 excl. VAT

*

plus shipping
($285.02 RRP***)
AP box Allmetal, 3 modules - Mounting frame for door station 3-unit
Legrand SEKO
| 350631
RECOMMENDED
Legrand SEKO - 350611 - AP box Allmetal, 1 module - Mounting frame for door station 1-unit 350611
$97.66 excl. VAT

*

plus shipping
($180.85 RRP***)
AP box Allmetal, 1 module - Mounting frame for door station 1-unit
Legrand SEKO
| 350611
RECOMMENDED
Legrand SEKO - 350641 - AP box Allmetal, 4 modules - Mounting frame for door station 4-unit 350641
$231.20 excl. VAT

*

plus shipping
($428.15 RRP***)
AP box Allmetal, 4 modules - Mounting frame for door station 4-unit
Legrand SEKO
| 350641
RECOMMENDED
Legrand SEKO - 350632 - AP box Allwhite, 3 modules - Mounting frame for door station 350632
$153.92 excl. VAT

*

plus shipping
($285.02 RRP***)
AP box Allwhite, 3 modules - Mounting frame for door station
Legrand SEKO
| 350632
RECOMMENDED
Legrand SEKO - 350661 - AP box Allmetal, 6 modules - Mounting frame for door station 6-unit 350661
$250.84 excl. VAT

*

plus shipping
($464.52 RRP***)
AP box Allmetal, 6 modules - Mounting frame for door station 6-unit
Legrand SEKO
| 350661
RECOMMENDED
Legrand SEKO - 350622 - AP box Allwhite, 2 modules - Mounting frame for door station 350622
$126.48 excl. VAT

*

plus shipping
($234.20 RRP***)
AP box Allwhite, 2 modules - Mounting frame for door station
Legrand SEKO
| 350622
RECOMMENDED
Busch Jaeger - 41383S-B-03 - Mounting box AP size 1/3 anth matt - Mounting frame for door station 3-unit 41383S-B-03
$61.39 excl. VAT

*

plus shipping
($103.78 RRP***)
Mounting box AP size 1/3 anth matt - Mounting frame for door station 3-unit
Busch Jaeger
| 41383S-B-03
RECOMMENDED
Legrand SEKO - 350633 - AP box Allstreet, 3 modules - Surface mounted housing 3-gang aluminium 350633
$153.92 excl. VAT

*

plus shipping
($285.02 RRP***)
AP box Allstreet, 3 modules - Surface mounted housing 3-gang aluminium
Legrand SEKO
| 350633
RECOMMENDED
Busch Jaeger - 41382S-H-03 - Mounting box AP size 1/2 lgr - Mounting frame for door station 2-unit 41382S-H-03
$52.68 excl. VAT

*

plus shipping
($89.05 RRP***)
Mounting box AP size 1/2 lgr - Mounting frame for door station 2-unit
Busch Jaeger
| 41382S-H-03
RECOMMENDED
BEG - 92121 - AP box IP54 for PD1N-UP - Accessory for motion sensor 92121
$9.71 excl. VAT

*

plus shipping
($13.72 RRP***)
AP box IP54 for PD1N-UP - Accessory for motion sensor
BEG
| 92121
1 From 746