Meter with Modbus, 1DA - Transformer kilowatt-hour meter 5A METSEPM5110

METSEPM5110 3606480613982 EAN/GTIN DE 33842582 WEEE

Our best price
$256.72 excl. VAT

15-16 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Transformer kilowatt-hour meter 8A Type of meter Electronic, Nominal current (In) 8A, Max.... more
Meter with Modbus, 1DA - Transformer kilowatt-hour meter 5A METSEPM5110 – Schneider Electric – 3606480613982: Transformer kilowatt-hour meter 8A Type of meter Electronic, Nominal current (In) 8A, Max. current (Imax) 20A, Nominal voltage (Un) N-L 20 ... 20V, Nominal voltage (Un) L-L 35 ... 690V, Frequency 45 ... 65Hz, Accuracy class C, Pole type Three conductor, Model Measurement transformer, Energy type Effective power and blind power, Suitable for Purchase, Tariff type One-tariff, Measuring type load profile, Calibrated, Approval Domestic, Pulse output Electrical, Pulse type S0, Pulse rate 1 ... 9999999Imp/kWh (kvarh), Type of indication Digital, Mounting method Plug-in technique, Width in number of modular spacings 6, Type of interface RS-485, Number of positions total (counter) 0, Degree of protection (IP) IP52
... more
Display graphic
Polart Three-wire/four-wire
Voltage AC/DC
Measuring range 35..690 V
Execution Transducers
Rated current (in) 5 A
Maximum current (Imax) 8.5A
Harmonics measurement yes
Power factor yes
Active power yes
Reactive power yes
Apparent power yes
Frequency measurement yes
Phase angle (cos phi) no
Measurement memory no
Maximum value storage yes
Minimum value memory yes
Accuracy class 0.5
Calibrated no
Measurement type load profile yes
Pulse output electrical
With communication interface EN 62056-21 compliant no
With KNX communication interface no
Supports protocol for LON no
With M-Bus communication interface no
Supports protocol for MODBUS yes
With communication interface RS-485 yes
Mounting Front assembly
Width 102 mm
Height 112 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Meter with Modbus, 1DA - Transformer kilowatt-hour meter 5A METSEPM5110"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.