Installation contactor 25A 2S 230-240VAC A9C20732

A9C20732 3606480088575 EAN/GTIN DE 33842582 WEEE

Our best price
$20.68 excl. VAT
$66.48 (-68.89% RRP***)

4-5 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Installation contactor 25A 2S 230-240VAC A9C20732 rated operating voltage 250 ... 250V, rated... more
Installation contactor 25A 2S 230-240VAC A9C20732 – Schneider Electric – 3606480088575: Installation contactor 25A 2S 230-240VAC A9C20732 rated operating voltage 250 ... 250V, rated operating current 25A, category of use 7, rated operating voltage 230 ... 240V, voltage type of the operating voltage AC, voltage type of the operating voltage AC, number of contacts as NO contact 2, number of contacts as NC contact 0 , Max. incandescent lamp load 2850W, Max. fluorescent lamp load 1200VA, Max. fluorescent lamp load (duo circuit) 2400VA, Max Acti 9 iCT. Rated current 25A, 2S, control voltage 230/240V, 50Hz, insulation voltage (Ui) 500V AC. Switching circuits up to 100A. Terminals IP 20. Low-noise switching. Mechanical switch position indicator. Installation contactors with preselection have an operating mode selector switch with four switching positions on the front. Compatible with the entire Acti 9 range. The iCT installation contactor complies with the following standards - EN 61095 and IEC 1095. This range is also VDE certified!.
... more
Rated operating voltage 250V
Rated operating current 25 A
Utilization category 7
Rated control voltage 230..240 V
Voltage type of the operating voltage AC
Voltage type of the actuating voltage AC
Number of contacts as normally open 2
Max. Incandescent lamp load 2850 W
Max. Fluorescent lamp load 1200 VA
Slider for manual operation no
Width in division units 1
Depth 43.5 mm
Additional equipment possible yes
IP protection) IP20

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Installation contactor 25A 2S 230-240VAC A9C20732"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.