Group switch, 1 pole, 20A 3 position - 3-way switch (alternating switch) A9E18073

A9E18073 3606480088506 EAN/GTIN DE 33842582 WEEE

Our best price
$21.44 excl. VAT
$42.58 (-49.65% RRP***)

15-16 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Group switch 1P 20A 3-position A9E18073 switching function changeover switch, number of contacts... more
Group switch, 1 pole, 20A 3 position - 3-way switch (alternating switch) A9E18073 – Schneider Electric – 3606480088506: Group switch 1P 20A 3-position A9E18073 switching function changeover switch, number of contacts as NO contact 0, number of contacts as NC contact 0, number of contacts as changeover contact 1, number of poles 2, rated current 20A, rated voltage 250V, min. rated voltage 250V, type of voltage AC, forced separation ( according to DIN VDE 0113), color of the cap white, width in pitch units 1, installation depth 75mm, degree of protection (IP) IP40, circuit breaker Acti 9 C120N, 10kA (IEC/EN 60898-1), 10kA (IEC/EN 60947-2). 3-pole, rated current 100A, C-characteristic, operating voltage (Ue) 380-415V AC, insulation voltage (Ui) 500V AC. Protecting circuits against short-circuit currents and overload currents. Terminals IP20. Fully open contacts are indicated by the OFF mark on the toggle switch, allowing downstream work to be carried out with due safety. Infeed from above and below. Snap action for low-wear switching of the contacts. Technology of trip unit - thermomagnetic. Can be combined with the FI Block Vigi for C120. Additional add-on auxiliary modules (optional) - display of switch position, error tripping, shunt trip, undervoltage trip, overvoltage trip. Color RAL 9003. The C120N miniature circuit breaker complies with the following standards - IEC/EN 60898-1 and IEC/EN 60947-2. Furthermore, this series is VDE certified.
... more
Switching function Changeover switch
Number of contacts as changer 1
Number of poles 2
Rated current 20 A
Rated voltage 250V
Minimum rated voltage 250V
Voltage AC
With signal lamp no
Color of the dome white
Width in division units 1
Depth 75 mm
IP protection) IP40
Imprint / indication without
Forced separation (according to DIN VDE 0113) yes

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Group switch, 1 pole, 20A 3 position - 3-way switch (alternating switch) A9E18073"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.