Light time impulse switch with 3 modes 1 NO contact 16A with ZI ZSZ 2

ZSZ 2 zsz209 4046929201063 EAN/GTIN DE 49141360 WEEE

Our best price
$40.00 excl. VAT
$57.45 (-30.37% RRP***)

4-5 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Light-time impulse switch m.3 modes 1S 16A m.ZI ZSZ 2 Electronic function with multifunction, DIN... more
Light time impulse switch with 3 modes 1 NO contact 16A with ZI ZSZ 2 – Schalk – zsz209 – 4046929201063: Light-time impulse switch m.3 modes 1S 16A m.ZI ZSZ 2 Electronic function with multifunction, DIN rail mounting type, width in modular units 1, installation depth 55mm, number of contacts as NO contact 1, number of contacts as NC contact 0, number of contacts as changeover contact 0, control voltage 1 207 ... 253V, type of control voltage 1 AC, frequency of control voltage 1 50 ... 60Hz, control voltage 2 8 ... 230V, type of control voltage 2 AC/DC, frequency of control voltage 2 50 ... 60Hz, rated switching current 16A, release delay 0.25 ... 150min, button glow lamp current 20mA, switching type 3- and 4-wire circuit, switch-off pre-warning without, current surge function selectable, downstream circuit can be switched + permanent light + time extension, supply voltage 207 ... 253V, type of supply voltage AC, Max. incandescent lamp load 1000W, Max. fluorescent lamp load 250VA, Max. fluorescent lamp load (duo circuit) 1000VA, Max ht time impulse switch (current impulse switch) a high degree of comfort, flexibility and functionality with easy handling and operation. By briefly or longer pressing the light button, you can choose between two independently adjustable time ranges. This enables individually configurable short-term / long-term switching in a range from 0.25 to 150 minutes. By pressing the light button again, the consumer is switched off immediately. Two operating modes enable the long-term switching to be blocked. The ZSZ 2 includes an additional external voltage input (8v-230V UC) that is galvanically isolated from the other inputs and outputs, which can be controlled, for example, by a door intercom system without a coupling relay, and also two inputs for central switching on and off, dimensions: 18x55mm , 230V AC - 1 NO contact (potential-free) 16A, tvK/tvL -18/-150min
... more
Function electronic with multifunction
Mounting DIN rail
Width in division units 1
Depth 55 mm
Number of contacts as normally open 1
Control voltage 1 207..253 V
Control voltage type 1 AC
Frequency of control voltage 1 50..60 Hz
Control voltage 2 8..230 V
Control voltage type 2 AC/DC
Frequency of control voltage 2 50..60 Hz
Rated operating current 16 A
Release delay 0.25..150 min
Button glow lamp current 20 mA
Switching 3- and 4-wire circuit
Switch-off without
Surge function selectable yes
Supply voltage 207..253 V
Voltage type of the supply voltage AC
Max. Incandescent lamp load 1000W
Max. Fluorescent lamp load 250 VA

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Light time impulse switch with 3 modes 1 NO contact 16A with ZI ZSZ 2"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.