LED wall/ceiling emergency light 4000K - Emergency luminaire 8,4W IP66 672284.0031.89

LED wall/ceiling emergency light 4000K - Emergency luminaire 8,4W IP66 672284.0031.89 – RZB – 4051859217954: LED wall/ceiling emergency light 4000K 672284.0031.89 Type of mounting Wall mounting/ceiling mounting, Escape route lighting function, Suitable for marking type Other, Type of marking not applicable, Monitoring device Monitoring module (centrally supplied system), Switching type maintained/standby mode, Central feed (central battery), Battery properties Other, Light source LED not interchangeable, With light source, Suitable for number of light sources 1, Socket without, Number of light heads 1, Housing material aluminium, Housing color anthracite, Cover material plastic opal, Type of voltage AC/DC, Rated voltage 220 ... 240V, Control gear Current-controlled LED control gear, light distributor without, energy efficiency class of the permanently installed lamp A++, A+, A (LED), degree of protection (IP) IP66, degree of protection (NEMA) other, impact resistance IK10, protection class I, luminaire with limited surface temperature 'D mark' ', Rated ambient temperature according to IEC6 2722-2-1 25 ... 25°C, max. system power 8.4W, rated luminous flux according to IEC 62722-2-1 530lm, luminous flux in standby mode 520lm, color temperature 4000 ... 4000K, power factor 0.54, height /depth 91mm, outer diameter 268mm, type of wiring termination, number of poles 5, conductor cross-section 2.5mm², connection type plug-in connection, elegant appearance without visible screws thanks to bayonet catch with snap lock. LED: Use of smart, low-cost LED modules for mains voltage with high LED system light output for energy-saving operation. Housing made of corrosion-resistant die-cast aluminium, powder-coated, robust design, stainless steel screws. Fast installation: Tolerance compensation for drill holes. Generous cable management space also allows wall outlets in the center of the luminaire. Electrical connection via plug-in terminals. Fastening points outside the lamp compartment, safe installation through consistent avoidance of errors. Seawater resistant coating optionally available. Fitting and housing made of corrosion-resistant die-cast aluminum for outdoor use, powder-coated. Cover spherical cap made of plastic (polycarbonate) opal. With mounting fixation. Screwless installation of the cover via bayonet catch with snap lock. Fastening outside of the sealed area with bore tolerance compensation. Built-in monitoring module. Standard with diaphragm valve to prevent condensation. Light source (mains voltage LED module) included. Energy efficiency class A++ I A++