Contact piece for flat bars - Busbar system for distribution boards SV 9676.546

Rittal - SV 9676.546 - Contact piece for flat bars - Busbar system for distribution boards SV 9676.546
Photo source: fig. possibly similar
Photo source: fig. possibly similar
SV 9676.546 9676546 4028177602779 EAN/GTIN DE 11161726 WEEE

$53.27 excl. VAT

15-16 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Contact piece for flat bars SV 9676.546 Height 0mm, width 0mm, depth 0mm, number of poles 3, bar... more
Contact piece for flat bars - Busbar system for distribution boards SV 9676.546 – Rittal – 9676546 – 4028177602779: Contact piece for flat bars SV 9676.546 Height 0mm, width 0mm, depth 0mm, number of poles 3, bar spacing 60mm, bar height 0mm, bar thickness 0mm, rated current 0A, short-circuit strength (Icw) 23kA, other material, SV contact piece E-Cu, BH: 60x20 mm, for 3 or 4 strands, (Flat-PLS)
... more
Height 0 mm
Width 0 mm
Depth 0 mm
Number of poles 3
Rail spacing 60 mm
Rail height 0 mm
Bar thickness 0 mm
Rated current 0A
Short-circuit strength (Icw) 23 kA
Material other

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Contact piece for flat bars - Busbar system for distribution boards SV 9676.546"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.