Surge protection device for HF applications - Surge protection for signal systems PT-IQ-3-PB-PT

Phoenix - PT-IQ-3-PB-PT - Surge protection device for HF applications - Surge protection for signal systems PT-IQ-3-PB-PT
Photo source: fig. possibly similar
Photo source: fig. possibly similar
PT-IQ-3-PB-PT 2801286 4046356766678 EAN/GTIN DE 50738265 WEEE

$119.92 excl. VAT
$228.68 (-47.56% RRP***)

15-16 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Overvoltage protection device for HF applications PT-IQ-3-PB-PT Rated voltage DC 5 ... 5V,... more
Surge protection device for HF applications - Surge protection for signal systems PT-IQ-3-PB-PT – Phoenix – 2801286 – 4046356766678: Overvoltage protection device for HF applications PT-IQ-3-PB-PT Rated voltage DC 5 ... 5V, maximum continuous voltage AC 4V, maximum continuous voltage DC 6V, rated discharge current (8/20) 10kA, rated load current 0.6A, protection level wire/wire 30V, protective level wire/earth 30V, limit frequency 60MHz, other type of installation, connection 1 terminal, arrester monitoring, optical signaling on the device, overvoltage protection, consisting of protective plug and base element, with integrated multi-stage status display on the module for three signal wires with a common reference potential. For HF applications and telecommunication interfaces without supply voltage (up to 90 MBit/s).
... more
Rated voltage DC 5 V
Highest continuous voltage AC 4 V
Highest continuous voltage DC 6V
Nominal discharge current (8/20) 10 kA
Nominal load current 0.6 A
Protection level wire / core 30 V
Protection level core / earth 30 V
Cut-off frequency 60 MHz
Mounting other
Connection 1 Clamp
SPD yes
With telecommunication contact no
Signaling on the device optical
Explosion-tested version no

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Surge protection device for HF applications - Surge protection for signal systems PT-IQ-3-PB-PT"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.