Surge protection device for Ex-i signal circuits PT-IQ-2X2-EX-24DC-UT

Phoenix - PT-IQ-2X2-EX-24DC-UT - Surge protection device for Ex-i signal circuits PT-IQ-2X2-EX-24DC-UT
Photo source: fig. possibly similar
Photo source: fig. possibly similar
PT-IQ-2X2-EX-24DC-UT 2801513 4046356801232 EAN/GTIN DE 50738265 WEEE

$177.58 excl. VAT
$338.63 (-47.56% RRP***)

15-16 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Surge protection device for Ex-i signal circuits PT-IQ-2X2-EX-24DC-UT Rated voltage DC 24 ...... more
Surge protection device for Ex-i signal circuits PT-IQ-2X2-EX-24DC-UT – Phoenix – 2801513 – 4046356801232: Surge protection device for Ex-i signal circuits PT-IQ-2X2-EX-24DC-UT Rated voltage DC 24 ... 24V, maximum continuous voltage AC 21V, maximum continuous voltage DC 30V, rated discharge current (8/20) 10kA, rated load current 0, 35A, protection level wire/wire 50V, protection level wire/earth 1300V, limit frequency 1.1MHz, other type of installation, connection 1 terminal, arrester monitoring, optical signaling on the device, overvoltage protection, consisting of protective plug and base element, with integrated multi-stage status display on the module, for two 2-wire floating Ex-i signal circuits. HART capable.
... more
Rated voltage DC 24V
Highest continuous voltage AC 21V
Highest continuous voltage DC 30 V
Nominal discharge current (8/20) 10 kA
Nominal load current 0.35 A
Protection level wire / core 50V
Protection level core / earth 1300 V
Cut-off frequency 1.1 MHz
Mounting other
Connection 1 Clamp
SPD yes
With telecommunication contact no
Signaling on the device optical
Explosion-tested version yes

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Surge protection device for Ex-i signal circuits PT-IQ-2X2-EX-24DC-UT"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.