Surge protection device base element for VDSL - Surge protection for signal systems PT-IQ-1X2-TEL...

Phoenix - PT-IQ-1X2-TELE-UT - Surge protection device base element for VDSL - Surge protection for signal systems PT-IQ-1X2-TEL...
Photo source: fig. possibly similar
Photo source: fig. possibly similar
PT-IQ-1X2-TELE-UT 2800769 4046356645072 EAN/GTIN DE 50738265 WEEE

$107.06 excl. VAT
$204.16 (-47.56% RRP***)

15-16 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Overvoltage protection device base element f.VDSL PT-IQ-1X2-TELE-UT Rated voltage DC 180 ...... more
Surge protection device base element for VDSL - Surge protection for signal systems PT-IQ-1X2-TEL... – Phoenix – 2800769 – 4046356645072: Overvoltage protection device base element f.VDSL PT-IQ-1X2-TELE-UT Rated voltage DC 180 ... 180V, maximum continuous voltage DC 180V, rated discharge current (8/20) 10kA, rated load current 0.15A, protection level wire/wire 290V, protection level wire/earth 700V, limit frequency 25MHz, other type of installation, connection 1 terminal, arrester monitoring, optical signaling on the device, overvoltage protection device, consisting of plug and base element, with integrated multi-stage status display on the module, to protect a pair of wires for analog and digital telecommunications interfaces (VDSL up to 50 MBit/ s, over short distances (< 300m) up to 100 MBit/s).
... more
Rated voltage DC 180V
Highest continuous voltage DC 180V
Nominal discharge current (8/20) 10 kA
Nominal load current 0.15 A
Protection level wire / core 290V
Protection level core / earth 700V
Cut-off frequency 25 MHz
Mounting other
Connection 1 Clamp
SPD yes
With telecommunication contact no
Signaling on the device optical
Explosion-tested version no

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Surge protection device base element for VDSL - Surge protection for signal systems PT-IQ-1X2-TEL..."
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.