Surge protection for signal systems PT-IQ-1X2+F-24DC-UT

Phoenix - PT-IQ-1X2+F-24DC-UT - Surge protection for signal systems PT-IQ-1X2+F-24DC-UT
Photo source: fig. possibly similar
Photo source: fig. possibly similar
PT-IQ-1X2+F-24DC-UT 2800977 4046356665179 EAN/GTIN DE 50738265 WEEE

$107.02 excl. VAT
$204.07 (-47.56% RRP***)

15-16 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Surge protection for signal systems Max. continuous voltage AC 21V, Max. continuous voltage DC... more
Surge protection for signal systems PT-IQ-1X2+F-24DC-UT – Phoenix – 2800977 – 4046356665179: Surge protection for signal systems Max. continuous voltage AC 21V, Max. continuous voltage DC 30V, Nominal discharge surge current (8/20) 10kA, Nominal load current 1A, Voltage protection level core/core 80V, Voltage protection level core/earth 900V, Voltage protection level core/signal ground 600V, Voltage protection level signal ground/protective ground 600V, Limiting frequency 1,1MHz, Mounting method DIN rail (top hat rail) 35 mm, Connection 1 Other, Pro-active thermo-control, Signalling at the device Optic
... more
Rated voltage DC 24V
Highest continuous voltage AC 21V
Highest continuous voltage DC 30 V
Nominal discharge current (8/20) 10 kA
Nominal load current 1 A
Protection level wire / core 55V
Protection level core / earth 1000V
Protection level wire / signal ground 600V
Protection level Signalground / Protectiveground 600V
Cut-off frequency 1.1 MHz
Mounting other
Connection 1 Clamp
SPD yes
With telecommunication contact no
Signaling on the device optical
Explosion-tested version no

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Surge protection for signal systems PT-IQ-1X2+F-24DC-UT"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.