Surge protection device for signal circuit PT-IQ-1X2-48DC-PT

Phoenix - PT-IQ-1X2-48DC-PT - Surge protection device for signal circuit PT-IQ-1X2-48DC-PT
Photo source: fig. possibly similar
Photo source: fig. possibly similar
PT-IQ-1X2-48DC-PT 2801257 4046356766401 EAN/GTIN DE 50738265 WEEE

$116.56 excl. VAT
$222.28 (-47.56% RRP***)

15-16 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Overvoltage protection device for signal circuit PT-IQ-1X2-48DC-PT Rated voltage DC 48 ... 48V,... more
Surge protection device for signal circuit PT-IQ-1X2-48DC-PT – Phoenix – 2801257 – 4046356766401: Overvoltage protection device for signal circuit PT-IQ-1X2-48DC-PT Rated voltage DC 48 ... 48V, maximum continuous voltage AC 37V, maximum continuous voltage DC 53V, rated discharge current (8/20) 10kA, rated load current 0.3A, protection level wire/wire 90V , protection level wire/earth 700V, cut-off frequency 1.9MHz, other type of installation, connection 1 terminal, arrester monitoring, optical signaling on the device, overvoltage protection, consisting of protective plug and base element, with integrated multi-stage status display on the module for a 2-wire floating signal circuit.
... more
Rated voltage DC 48V
Highest continuous voltage AC 37 V
Highest continuous voltage DC 53 V
Nominal discharge current (8/20) 10 kA
Nominal load current 0.3 A
Protection level wire / core 90 V
Protection level core / earth 700V
Cut-off frequency 1.9 MHz
Mounting other
Connection 1 Clamp
SPD yes
With telecommunication contact no
Signaling on the device optical
Explosion-tested version no

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Surge protection device for signal circuit PT-IQ-1X2-48DC-PT"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.