Contact insert - Socket insert for connector 72p HC-DD72-I-CT-F-144

Phoenix - HC-DD72-I-CT-F-144 - Contact insert - Socket insert for connector 72p HC-DD72-I-CT-F-144
Photo source: fig. possibly similar
Photo source: fig. possibly similar
HC-DD72-I-CT-F-144 1584101 4046356133418 EAN/GTIN DE 50738265 WEEE

$16.10 excl. VAT
$25.89 (-37.81% RRP***)

15-16 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Socket insert for connector 72p Contact insert without contacts, Contact type Socket, Number of... more
Contact insert - Socket insert for connector 72p HC-DD72-I-CT-F-144 – Phoenix – 1584101 – 4046356133418: Socket insert for connector 72p Contact insert without contacts, Contact type Socket, Number of poles 72, Diameter plug-in contact 1,6mm, Material connector of connector insert Thermoplastic, Rated current In 10A, Ambient temperature -40 ... 125°C, Rated voltage 250V, Rated surge voltage 4kV, Over voltage category III, Pollution degree 3, Type of electric connection Crimp connection, Connectable conductor cross section fine-strand without cable end sleeve 0,14 ... 2,5mm², Connectable conductor cross section fine-strand with cable end sleeve 0,14 ... 2,5mm², Connectable conductor cross section solid-core 0,14 ... 2,5mm², Material of contact surface Other, Material contact Other copper alloys, Inflammability class of insulation material acc. with UL94 V0, With protective conductor
... more
Number of power contacts 72
Contact insert without contacts yes
Contact Style Socket
Number of poles 72
Diameter of the plug contact 1.6 mm
Material of the connector insert Thermoplastic
Rated current In 10 A
Ambient temperature 125 °C
Operating temperatur -40..125 °C
Rated voltage 250V
Rated surge voltage 4 kV
Overvoltage category III
Pollution degree 3
With wire protection no
Material of the contact coating other
Material of the contact insert Thermoplastic
Material of the contact other copper alloys
With protective conductor yes
Min. number of mating cycles 500
Width 34 mm
Height 34.5 mm
Depth 84 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Contact insert - Socket insert for connector 72p HC-DD72-I-CT-F-144"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.