Contact insert series K4/8 - Pin insert for connector 12p HC-K 4/8-ESTS

Phoenix - HC-K 4/8-ESTS - Contact insert series K4/8 - Pin insert for connector 12p HC-K 4/8-ESTS
Photo source: fig. possibly similar
Photo source: fig. possibly similar
HC-K 4/8-ESTS 1679333 4017918163570 EAN/GTIN DE 50738265 WEEE

$60.26 excl. VAT
$97.01 (-37.88% RRP***)

15-16 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Pin insert for connector Contact type Pin, Number of poles 12, Diameter plug-in contact 6mm,... more
Contact insert series K4/8 - Pin insert for connector 12p HC-K 4/8-ESTS – Phoenix – 1679333 – 4017918163570: Pin insert for connector Contact type Pin, Number of poles 12, Diameter plug-in contact 6mm, Material connector of connector insert Thermoplastic, Rated current In 80A, Ambient temperature -40 ... 125°C, Rated voltage 400V, Rated surge voltage 6kV, Over voltage category III, Pollution degree 3, Type of electric connection Screw connection, Connectable conductor cross section fine-strand without cable end sleeve 1,5 ... 16mm², Connectable conductor cross section fine-strand with cable end sleeve 1,5 ... 16mm², Connectable conductor cross section solid-core 1,5 ... 16mm², Material of contact surface Other, Material contact Other copper alloys, Inflammability class of insulation material acc. with UL94 V0, With protective conductor
... more
Number of power contacts 4
Number of control contacts 8th
Contact insert without contacts no
Contact Style Pen
Number of poles 12
Diameter of the plug contact 6 mm
Material of the connector insert Thermoplastic
Rated current In 80 A
Ambient temperature 125 °C
Operating temperatur -40..125 °C
Rated voltage 400V
Rated surge voltage 6 kV
Overvoltage category III
Pollution degree 3
With wire protection no
Material of the contact coating other
Material of the contact insert Thermoplastic
Material of the contact other copper alloys
With protective conductor yes
Min. number of mating cycles 500
Width 34 mm
Height 42 mm
Depth 111 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Contact insert series K4/8 - Pin insert for connector 12p HC-K 4/8-ESTS"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.