Overvoltage protection Construct TBS - Surge protection for signal systems KOAX B-E2 FF-F

OBO - KOAX B-E2 FF-F - Overvoltage protection Construct TBS - Surge protection for signal systems KOAX B-E2 FF-F
Photo source: fig. possibly similar
Photo source: fig. possibly similar
KOAX B-E2 FF-F 5082434 4012196415731 EAN/GTIN DE 64419409 WEEE

$79.11 excl. VAT
$154.20 (-48.7% RRP***)

15-16 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Surge protection Construct TBS KOAX B-E2 FF-F Maximum continuous voltage AC 4.2V, maximum... more
Overvoltage protection Construct TBS - Surge protection for signal systems KOAX B-E2 FF-F – OBO – 5082434 – 4012196415731: Surge protection Construct TBS KOAX B-E2 FF-F Maximum continuous voltage AC 4.2V, maximum continuous voltage DC 6.2V, nominal discharge current (8/20) 10kA, nominal load current 1A, protection level wire/wire 40V, protection level wire/earth 600V, frequency 0 . .. 160MHz, limit frequency 160MHz, connector/cable adapter mounting type, connection 1 BNC, 50 Ohm, data line protection devices for coaxial and IP-based TV or camera systems in an aluminum housing. Simple installation using an adapter plug. With two-stage protection circuit.
... more
Highest continuous voltage AC 4.2V
Highest continuous voltage DC 6.2V
Nominal discharge current (8/20) 10 kA
Nominal load current 1 A
Protection level wire / core 40V
Protection level core / earth 600V
Frequency 0..160 MHz
Cut-off frequency 160 MHz
Mounting Connector / cable adapter
Connection 1 BNC, 50 ohms
With telecommunication contact no
Explosion-tested version no
IP protection) IP40

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Overvoltage protection Construct TBS - Surge protection for signal systems KOAX B-E2 FF-F"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.