CombiController V20 three-pole with NPE+FS - Surge protection for power supply V20-3+NPE+FS-280

V20-3+NPE+FS-280 5095333 4012196163427 EAN/GTIN DE 64419409 WEEE

Our best price
$233.90 excl. VAT
$434.93 (-46.22% RRP***)

15-16 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
CombiController V20 three-pole with NPE+FS V20-3+NPE+FS-280 Rated discharge current (8/20) 20kA,... more
CombiController V20 three-pole with NPE+FS - Surge protection for power supply V20-3+NPE+FS-280 – OBO – 5095333 – 4012196163427: CombiController V20 three-pole with NPE+FS V20-3+NPE+FS-280 Rated discharge current (8/20) 20kA, rated voltage AC 230V, maximum continuous voltage AC 280V, mounting type DIN rail TH35, size 4 TE, protection level 1.3kV, max. conductor cross-section rigid (single/stranded) 35mm², max. conductor cross-section, flexible (finely stranded) 35mm², protection level LN 1.3kV, protection level N-PE 1.3kV, with remote signaling contact, optical signaling on the device, test class type 2, degree of protection (IP) IP20, Der V20 surge arrester made of halogen-free plastic is suitable for surge protection potential equalization according to VDE 0100-443 (IEC 60364-4-44). The modular, pluggable arresters are characterized by a dynamic disconnect device and an optical status display. The FS with NPE variant offers a heavy-duty spark gap between the neutral and protective conductors as well as a potential-free changeover contact that enables remote signaling. The SurgeController is particularly suitable for potential equalization in main and sub-distributions, depending on the type in the areas of TN and TT networks. Thanks to the high-performance varistors, the discharge capacity is up to 40 kA (8/20) per pole. The vibration-proof latching and the voltage and type coding ensure safety and avoid mixing up upper and lower parts. The wedge-shaped design of the contacts makes it easy to insert and even easier to remove the upper parts. Additional technical product information can be called up quickly and easily using the QR code on the rating plate using mobile devices.
... more
Network form DC no
Network form IT no
Network shape TN yes
Mains form TN-C no
Mains form TN-CS yes
Mains form TN-S yes
Network shape TT yes
Network form other no
Nominal discharge current (8/20) 20 kA
Max. Surge current (8/20) 40 kA
Rated voltage AC 230V
Highest continuous voltage AC 280V
Protection level 1.3 kV
Protection level LN 1.3 kV
Protection level N-PE 1.3 kV
Integrated backup fuse no
Mounting DIN rail TH35
Size 4 TE
With telecommunication contact yes
Signaling on the device optical
Test class type 2 yes
IP protection) IP20

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "CombiController V20 three-pole with NPE+FS - Surge protection for power supply V20-3+NPE+FS-280"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.