Speed-/standstill monitoring relay DRIW-E16 230VAC 22.5

DRIW-E16 230VAC 22.5 1101500522 4250184120292 EAN/GTIN DE 87494433 WEEE

Our best price
$61.31 excl. VAT
$150.26 (-59.2% RRP***)

4-5 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Speed monitor DRIW-E16 230VAC 22.5 Design of the electrical connection screw connection, rated... more
Speed-/standstill monitoring relay DRIW-E16 230VAC 22.5 – Metz – 1101500522 – 4250184120292: Speed monitor DRIW-E16 230VAC 22.5 Design of the electrical connection screw connection, rated control supply voltage Us at AC 50 Hz 230 ... 230V, type of voltage for actuation AC, evaluation of the inputs single-channel, speed monitoring function, standstill monitoring function, operating frequency 2 ... 70Hz, number of outputs , safety-related, instantaneous, contact-based 0, number of outputs, safety-related, delayed, contact-based 0, number of outputs, safety-related, instantaneous, semiconductor 0, number of outputs, safety-related, delayed, semiconductor 0, number of outputs, signaling function, instantaneous, contact-based 2, number of outputs, signaling function, delayed, contact-based 0, number of outputs, signaling function, undelayed, semiconductor 0, number of outputs, signaling function, delayed, semiconductor 0, SIL according to IEC 61508 without, width 22.5mm, height 60mm, depth 60mm, The speed and V-belt monitor is used to monitor rotary movements g (underspeeds) on motor or belt driven shafts. Inductive proximity switches are used to record the speed. The impulse generation at the sensor occurs without contact by means of switching cams, gear wheels, segment discs, metallic signal flags or similar. When the operating voltage is applied, the relay picks up. The monitoring function is started via the power contactor of the drive at terminals E1 and E2 after the start-up delay has elapsed. If the drive falls below the switch-off speed, the relay drops out. The error message of the speed and V-belt monitor is reset by resetting or switching off the operating voltage.
... more
Voltage type for actuation AC
With removable clamps no
Evaluation of the inputs one channel
Function Speed ​​monitoring yes
Function Standstill monitoring yes
Operating frequency 2..70 Hz
With feedback loop no
Suitable for safety functions no
SIL according to IEC 61508 without
With approval for BG BIA no
With approval according to UL no
Width 22.5 mm
Height 60 mm
Depth 60 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Speed-/standstill monitoring relay DRIW-E16 230VAC 22.5"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.