Fan 2100cbm/h,160W,IP55 - Two-way industrial fan 250mm EZQ 25/2 B

Maico - EZQ 25/2 B - Fan 2100cbm/h,160W,IP55 - Two-way industrial fan 250mm EZQ 25/2 B
Photo source: fig. possibly similar
Photo source: fig. possibly similar
EZQ 25/2 B 0083.0104 4012799831044 EAN/GTIN DE 78107228 WEEE

Our best price
$815.00 excl. VAT
$1,254.22 (-35.02% RRP***)

15-16 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Fan 2100cbm/h,160W,IP55 EZQ 25/2 B, mains frequency=50 Hz, rated voltage=230 V, medium... more
Fan 2100cbm/h,160W,IP55 - Two-way industrial fan 250mm EZQ 25/2 B – Maico – 0083.0104 – 4012799831044: Fan 2100cbm/h,160W,IP55 EZQ 25/2 B, mains frequency=50 Hz, rated voltage=230 V, medium temperature=-20..60 °C, volume flow=1470 m³/h, speed=2833 1/min, protection class ( IP)=IP55, design=ventilation, nominal diameter=250 mm, closing flap=without, protective grille on the suction side, yellow chromated, protection against accidental contact according to DIN EN ISO 13857. 8-blade impellers made of glass-fibre reinforced polyamide. Dynamically balanced on 2 levels, according to quality level 6.3, DIN ISO 1940, Part 1. Can be installed in any position. Conveying direction: The following figure shows the conveying direction: Conveying direction A: Suction via the motor, standard. Conveying direction B: blowing via the motor, on request. Direction of rotation, reverse operation: The volume flow is reduced by approx. 35% if the direction of flow is abnormal. Motor: asynchronous motor. Speed controllable. Exception: Type EZQ 45/6 B, EZS 45/6 B, DZQ 40/2 B and DZS 40/2 B. Reversible. Exception: fans with shaded-pole motor (...-E). Not suitable for pumping water vapor-saturated air. AC motor: Type series EZQ and EZS. Rated voltage 230 V, 50 Hz. Thermal overload protection as standard. Fans ../B: Capacitor motors with operating capacitor on the protective grille or on the wall sleeve, protection class IP 55. Fans ../D: Capacitor motors with operating capacitor in the connection box, protection class IP 54. Fans ../E: Shaded-pole motors, not reversible, protection class IP 54 .Electrical connection: To the terminal block in the end cover of the motor. Safety instructions: The fan may only be put into operation if the contact protection of the impeller is guaranteed in accordance with DIN EN ISO 13857. Article: EZQ 25/2 B, design: square wall plate, flow rate: 2100 m3/h, flow rate nominal: 1470 m3/h / in opt. Efficiency, pressure pfs, nominal: 135 Pa - in opt. Efficiency, speed nnom: 2770 rpm - in opt. Efficiency, speed: 2833 rpm, impeller type: axial, speed controllable: yes, reversible: yes, type of voltage: alternating current, rated voltage: 230 V, mains frequency: 50 Hz, rated power: 185 W / in opt. Efficiency, Irated: 0.75 A / im opt. Efficiency, IMax: 1.1 A, degree of protection: IP 55, thermal class: F, installation location: wall / ceiling, installation type: surface-mounted, installation position: horizontal / vertical, material: sheet steel, galvanized, weight: 4.3 kg, nominal diameter: 250 mm, width: 400 mm, height: 400 mm, depth: 259 mm, conveying medium temperature at nominal current: -20 °C to 60 °C, conveying medium temperature at IMax: -20 °C to 60 °C, overall efficiency e: 29.8 % , measurement category: A, efficiency category: static, degree of efficiency N: 40.8, VSD required: no, year of manufacture: see type plate, manufacturer name / official registration number / place of business of the manufacturer: Maico Elektroapparate-Fabrik GmbH / Freiburg Register Court, HRB 601233 / Villingen-Schwenningen , PBEP / delivery volumeBEP / Pfs, BEP: 0.185 kW / 1470 m3/h / 135 Pa, nBEP: 2770 1/min, specific ratio: approx. 1, information on dismantling and disposal: see assembly instructions, information on installation, operation and maintenance : see assembly instructions, items used in the Effizie nz measurement that is not described by the measurement category: sound power level LWA7: 80 dB(A), shutter: none
... more
Power frequency 50 Hz
Rated voltage 230V
Medium temperature 60 °C
volume flow 2100 m³/h
Number of revolutions 2833 1/min
IP protection) IP55
Execution Ventilation
Nominal width 250 mm
Flap without

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Fan 2100cbm/h,160W,IP55 - Two-way industrial fan 250mm EZQ 25/2 B"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.