Step switch without 0 position, 2-pin - Off-load switch 2-pole 10A CG4 A250-600 FS2

Kraus & Naimer - CG4 A250-600 FS2 - Step switch without 0 position, 2-pin - Off-load switch 2-pole 10A CG4 A250-600 FS2
Photo source: fig. possibly similar
CG4 A250-600 FS2 9004257056224 EAN/GTIN DE 21630058 WEEE

Our best price
$37.02 excl. VAT
$48.31 (-23.37% RRP***)

15-16 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Step switch without 0 position, 2-pole CG4 A250-600 FS2, version=step switch, number of poles=2,... more
Step switch without 0 position, 2-pin - Off-load switch 2-pole 10A CG4 A250-600 FS2 – Kraus & Naimer – 9004257056224: Step switch without 0 position, 2-pole CG4 A250-600 FS2, version=step switch, number of poles=2, with zero position=no, rated uninterrupted current Iu=10 A, degree of protection (IP), on the front=IP65, suitable for floor mounting=no, suitable for front mounting =yes, suitable for distributor installation=no, suitable for intermediate installation=no, complete device in the housing=no, design of the actuating element=short rotary handle, connection type main circuit=screw connection, the axial arrangement of the connection terminals on the CG switches enables them to be placed close together or directly to be mounted adjacent to the cable duct. The terminal screws are accessible at a 45° angle to the switch axis. This means that the connecting screws can be reached at an angle from behind (front installation).
... more
Execution Step switch
Number of poles 2
With zero position no
Rated continuous current Iu 10 A
Degree of protection (IP), front side IP65
Suitable for ground mounting no
Suitable for front attachment yes
Suitable for distributor installation no
Suitable for intermediate construction no
Complete device in the housing no
Connection type main circuit Screw

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Step switch without 0 position, 2-pin - Off-load switch 2-pole 10A CG4 A250-600 FS2"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.