Dimmer Universal LED built-in 1724DEB

Dimmer Universal LED built-in 1724DEB – Jung – 4011377177093: Universal LED built-in dimmer 1724DEB composition of the basic element, other operating mode, leading edge dimming, trailing edge dimming, load type universal, extension input, light value memory, type of installation built-in installation, type of fastening fastening with screw, material other, material quality other, halogen-free, nominal voltage 230 ... 230V, frequency 50 . .. 60Hz, rated power 20 ... 210VA, connection type screw terminal, core cross section 0.75 ... 4mm², device width 53mm, device height 97mm, device depth 36mm, universal LED dimmer, built-in, with extension input, rated voltage: AC 230 V, mains frequency: 50 /60 Hz, power loss: approx. 2 W, standby power: approx. 0.3 W, device works according to the leading edge or trailing edge phase principle, operating mode display via LED, switch on with lamp-friendly soft start, switch-on brightness and minimum brightness can be saved permanently, switch on with the last setting Brightness or saved switch-on brightness, electronic short-circuit protection z with permanent switch-off after no more than 7 seconds, electronic over-temperature protection, automatic or manual setting of the dimming principle suitable for the load, power expansion possible through power boosters, operation without neutral conductor possible, test operation for functional testing, connected load at 25 °C: incandescent lamps: 20 to 210 W, HV -Halogen lamps: 20 to 210 W, HV LED lamps dimmable: typically 3 to 50 W, compact fluorescent lamps dimmable: typically 3 to 50 W, electronic transformers: 20 to 210 W, electronic transformers with LV LEDs: typically 20 to 50 W , inductive transformers: 20 to 210 VA, inductive transformers with LV-LED: 20 to 50 VA, when operating in the LED operating mode trailing edge: Connected load for HV-LED lamps: typically 3 to 100 W, electronic transformers with LV-LED: typically 20 to 100 W, ohmic-capacitive: 20 to 210 W, capacitive-inductive: not permitted, ohmic-inductive: 20 to 210 VA, ohmic and HV-LED: typically 3 to 50 W, ohmic and compact fluorescent lamps: typically 3 to 5 00 W, when operating in the LED trailing edge operating mode, the connected load doubles for HV LED lamps and electronic transformers with LV LEDs: ohmic-capacitive: 20 to 210 W, ohmic-inductive: 20 to 210 VA, capacitive-inductive: not permitted, ohmic-inductive: 20 to 210 VA, ohmic and HV-LED: typically 3 to 50 W, ohmic and compact fluorescent lamps: typically 3 to 50 W, operation via 2- or 3-wire extension, rotary extension 3-wire or Button with make contact, total length of load line: maximum 100 m, total length of extension line: maximum 100 m, connection: screw terminals, 1 x 0.75 to 2.5 mm² or 2 x 0.75 to 1.5 mm² (solid), 1 x 1 up to 4 mm² or 2 x 1 to 2.5 mm² (finely stranded without ferrule) and 1 x 1 to 2.5 mm² or 2 x 1 mm² (finely stranded with ferrule), number of extensions: unlimited (extension insert 2-wire item no : 1720 NE and non-illuminated installation button), 10 (auxiliary insert 3-wire item no.: 1723 NE and rotating auxiliary insert 3 wire item no.: 1733 DNE), ambient temperature: - 5 to + 45 °C, dimensions (W x H x D): 53 x 97 x 36 mm, for switching lighting and motors