LED rotary dimmer standard - Dimmer flush mounted 3...210VA 1730 DD

LED rotary dimmer standard - Dimmer flush mounted 3...210VA 1730 DD – Jung – 4011377166974: Standard 1730 DD LED rotary dimmer, composition of the basic element, rotary/push button operation, phase control dimming, trailing edge phase cut dimming, load type other, light value memory, type of installation flush-mounted, type of fastening claw/screw fastening, material other, material quality other, halogen-free, nominal voltage 230 ... 230V, Frequency 50 ... 60Hz, rated power 3 ... 210VA, connection type screw terminal, core cross section 0.5 ... 4mm², rotary dimmer standard LED, insert, with incremental encoder, rated voltage: AC 230 V ~, mains frequency: 50/60 Hz, standby -Power: approx. 0.35 W, power loss: approx. 2 W, device works according to the leading edge or trailing edge principle, device can be operated without a neutral conductor, automatic setting of the dimming principle suitable for the load, switching on by soft start that protects the lamp, switching on with the last set Brightness or saved switch-on brightness, switch-on brightness can be saved permanently, minimum brightness can be saved permanently, electro nical short-circuit protection with permanent shutdown after 7 seconds at the latest, electronic overtemperature protection, connected load at 25 °C: incandescent lamps: 20 to 210 W, HV halogen lamps: 20 to 210 W, HV LED lamps dimmable: typically 3 to 60 W, compact fluorescent lamps dimmable : typically 3 to 60 W, electronic transformers: 20 to 210 W, electronic transformers with LV LED 20 to 60 W, inductive transformers: 20 to 210 VA, inductive transformers with LV LED 20 to 60 VA, ohmic-capacitive: 20 up to 210 W, capacitive-inductive: not permitted, ohmic-inductive: 20 to 210 VA, ohmic and HV-LED: typically 3 to 60 W, ohmic and compact fluorescent lamps: typically 3 to 60 W, operation without neutral conductor: minimum load 50 W, does not apply to loads with HV LED and compact fluorescent lamps, power can be expanded using power boosters, total length of load line: maximum 100 m, connection: screw terminals, 1 x 0.5 to 4 mm² or 2 x 0.5 to 2.5 mm² (solid and finely stranded without ferrule) and 1 x 0.5 to 4 mm² or r 2 x 0.5 to 1.5 mm² (finely stranded with ferrule), ambient temperature: - 5 to + 45 °C, test mark: VDE, for switching and dimming lighting