Residual current circuit breaker 4p 10kA63A300mATypB+ CFB663D

Hager - CFB663D - Residual current circuit breaker 4p 10kA63A300mATypB+ CFB663D
Photo source: fig. possibly similar
Photo source: fig. possibly similar
CFB663D 3250611627746 EAN/GTIN DE 23692311 WEEE

Our best price
$925.45 excl. VAT

15-16 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Residual current breaker 4-p, Residual current breaker 4-p Number of poles 4, Rated voltage 400V,... more
Residual current circuit breaker 4p 10kA63A300mATypB+ CFB663D – Hager – 3250611627746: Residual current breaker 4-p, Residual current breaker 4-p Number of poles 4, Rated voltage 400V, Rated current 63A, Rated fault current 300mA, Rated insulation voltage Ui 400V, Rated impulse withstand voltage Uimp 4kV, Mounting method DIN rail, Leakage current type B+, Short-circuit breaking capacity (Icw) 10kA, Surge current capacity 5kA, Frequency 50 Hz, Additional equipment possible, With interlocking device, Degree of protection (IP) IP20, Width in number of modular spacings 4, Built-in depth 70mm, Ambient temperature during operating -25 ... 70°C, Pollution degree 2, Connectable conductor cross section multi-wired 1 ... 16mm², Connectable conductor cross section solid-core 1 ... 25mm²
... more
Number of poles 4
Rated voltage 400V
Rated current 63 A
Rated fault current 0.3 A
Rated insulation voltage Ui 400V
Rated impulse withstand voltage Uimp 4 kV
Mounting DIN rail
Fault current type B+
Selective type no
Short time delayed type no
Short-circuit strength (Icw) 10 kA
Surge current resistance 5 kA
Voltage AC
With locking device yes
Frequency 50 Hz
Additional equipment possible yes
IP protection) IP20
Width in division units 4
Depth 70 mm
Pollution degree 2
Explosion protection no

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Residual current circuit breaker 4p 10kA63A300mATypB+ CFB663D"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.