Decentralized TLZ actuator with sensor input - Switch actuator for home automation 1-ch PL-SAM1LT

Decentralized TLZ actuator with sensor input - Switch actuator for home automation 1-ch PL-SAM1LT – Eltako – 31100004 – 4010312316702: Decentralized TLZ actuator with sensor input PL-SAM1LT Powernet bus system, Other bus systems without, Flush mounting type, With LED display, Max. switching capacity 2000W, Output power 2000W, Suitable for C-load, Max. number of switching outputs 1, Max. switching current 10A , With bus coupling, min. depth of the device box 25mm, Powerline TLZ actuator with 1 channel. 53x43mm, 25mm deep, for mounting in 58mm switch boxes. Off delay from 1 minute to 120 minutes. Switch-off pre-warning adjustable. 1 NO contact not potential-free 10A/250V AC, incandescent lamps 2000 watts. Sensor input 230V. Standby loss only 0.5 watts. For controlling and switching in the same place. There are two rotary switches on the front for address assignment: The left rotary switch determines the group address g with 16 alphabetical values from A to P. The right rotary switch determines the off-delay time. Above this is a slide switch as a configuration switch with the positions 0, 1 and 2. To the left of the rotary switches is a red LED which displays all activities. Next to it is the reset button and to the right of it a service pin. Functions according to the user manual. The connection terminals at the top are plug-in terminals for conductor cross-sections from 0.2mqm to 1.5mqm.