Impulse switch ES12DX-UC

ES12DX-UC 21100002 4010312107959 EAN/GTIN DE 30298319 WEEE

Our best price
$34.75 excl. VAT
$64.00 (-45.7% RRP***)

4-5 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Impulse switch 16A,1S,250VAC ES12DX-UC function electronic switch, mounting type DIN rail, width... more
Impulse switch ES12DX-UC – Eltako – 21100002 – 4010312107959: Impulse switch 16A,1S,250VAC ES12DX-UC function electronic switch, mounting type DIN rail, width in modular units 1, installation depth 58mm, number of contacts as NO contact 1, number of contacts as NC contact 0, number of contacts as changeover contact 0, control voltage 1 8 ... 230V, type of control voltage 1 AC/DC, frequency of control voltage 1 50 ... 50Hz, control voltage 2 230 ... 230V, type of control voltage 2 AC, frequency of control voltage 2 50 ... 50Hz, rated switching current 16A, supply voltage 250 .. 250V, type of supply voltage AC, max. incandescent lamp load 2000W, max. fluorescent lamp load 1000VA, max. Impulse switch, stand-by consumption of only 0.1 watts. If the contact is used to control switching devices that do not switch at zero crossing themselves, (N) should not be connected, otherwise the additional closing delay will have the opposite effect. The simultaneous use of two potentials at the control inputs is not permitted. Very low switching noise. No constant power supply required, therefore no standby loss. The latest hybrid technology combines the advantages of wear-free electronic control with the high performance of special relays. Due to the use of a bistable relay, there is no coil power loss and no heating as a result, even when switched on. The relay contact can be open or closed during commissioning and is synchronized with the first actuation. The connection terminal assignment is identical to that of the electromechanical impulse switch.
... more
Function electronic switch
Mounting DIN rail
Width in division units 1
Depth 58 mm
Number of contacts as normally open 1
Control voltage 1 8..230 V
Control voltage type 1 AC/DC
Frequency of control voltage 1 50 Hz
Control voltage 2 230V
Control voltage type 2 AC
Frequency of control voltage 2 50 Hz
Rated operating current 16 A
Supply voltage 250V
Voltage type of the supply voltage AC
Max. Incandescent lamp load 2000 W
Max. Fluorescent lamp load 1000 VA
Suitable for manual operation no

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Impulse switch ES12DX-UC"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.