Control relay 2W potential-free 16A/250V - Installation relay 8...230VAC/DC ER12-002-UC

Control relay 2W potential-free 16A/250V - Installation relay 8...230VAC/DC ER12-002-UC – Eltako – 22002601 – 4010312205372: Control relay for series EB 2W potential-free 16A/250V ER12-002-UC function partially electronic, type of mounting DIN rail, width in modular units 1, installation depth 58mm, number of contacts as NO contact 0, number of contacts as NC contact 0, number of Contacts as changeover contact 2, control voltage 1 8 ... 230V, type of control voltage 1 AC/DC, frequency of control voltage 1 50 ... 50Hz, rated current 16A, supply voltage 250 ... 250V, type of voltage of the supply voltage AC, max. bulb load 2000W, max Fluorescent lamp load 1000VA, max. No standby loss. The latest hybrid technology combines the advantages of wear-free electronic control with the high performance of special relays. Low switching noise. Control display with LED. Integrated freewheeling/quenching diode (A1 = +, A2 = -). Due to the use of bistable relays, there is no coil power loss and no heating as a result, even when switched on. The relay contact can be open or closed during commissioning and is synchronized with the first actuation. This relay is not suitable for feedback with the switching voltage of a dimmer switch. The electronics do not have their own power supply and therefore no standby loss. Only when the control contact is closed is the microcontroller activated, which switches the bistable relay in the right direction. When the control contact opens or the control voltage drops, it switches back.