Control dimmer switch for electronic ballasts, 1-10V - Dimmer modular distributor SDS12/1-10V
SDS12/1-10V
21100800
4010312109403
EAN/GTIN
DE 30298319
WEEE
Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.
Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.
Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Control dimmer switch 1-10V, f.EVGs SDS12/1-10V compilation other, touch operation, load type...
more
Control dimmer switch for electronic ballasts, 1-10V - Dimmer modular distributor SDS12/1-10V – Eltako – 21100800 – 4010312109403: Control dimmer switch 1-10V, f.EVGs SDS12/1-10V compilation other, touch operation, load type capacitive load, light value memory, can be used with button, can be used with motion detector, can be used with presence detector, can be used with timer/timer, mounting type REG, mounting type mounting with screw, material plastic, material quality thermoplastic, halogen-free, other surface, design of the surface matt, color blue, control voltage 8 ... 230V, connection type screw terminal, core cross section 6 ... 6mm², device width 55mm, device height 45mm, device depth 33mm, 1- 10V control dimmer switch for electronic ballasts. 1-10V control output 40mA. Standby loss only 1 watt. Minimum brightness and dimming speed adjustable. With children's room and snooze switch. Also for controlling LED converters with passive 1-10V interface without auxiliary voltage up to 0.6mA. Above that with auxiliary voltage. Locally and centrally on/off with the same potential. Supply voltage galvanically isolated. The latest hybrid technology combines the advantages of wear-free electronic control with the high performance of special relays. Switching in the zero crossing to protect the contacts. The set brightness level is saved when the device is switched off (memory). In the event of a power failure, the switching position and the brightness level are saved and, if necessary, it is switched on when the supply voltage returns. The minimum brightness (fully dimmed) can be set with the % rotary switch. At the same time, it is determined whether the children's room switch and the snooze switch are active (+KI +SL). The dimming speed can be set with the dim-speed rotary switch. The load is switched on and off with a bistable relay at the EVG output. Switching capacity of fluorescent lamps or LV halogen lamps with electronic ballast 600VA. Due to the use of a bistable relay, there is no coil power loss and no heating as a result, even when switched on. After installation, wait for the brief automatic synchronization before the switched consumer is connected to the mains. Either direction buttons can be connected to arrow up + down, or these connection terminals are bridged and a button is connected as a universal button. The up arrow is then on and dimming up, and the down arrow is off and dimming down. Double-clicking the arrow above triggers automatic dimming up to full brightness at dim-speed. Double-clicking the arrow below triggers the snooze function. The children's room switching is carried out with the button at the arrow above. As a universal button, the direction is reversed by briefly releasing the button. Children's room circuit KI (universal button or direction button arrow above): When switching on by pressing the button for a longer period of time, after approx. 1 second it is switched on with the lowest brightness and, as long as the button is pressed, it is slowly dimmed up without changing the brightness level last saved. Snooze circuit SL (universal button or direction button arrow below): The lighting is dimmed from the current dimming setting to minimum brightness and switched off by a double pulse. The maximum dimming time of 60 minutes depends on the current dimming setting and the set minimum brightness and can be shortened accordingly. You can switch off at any time during the dimming process by briefly pressing the button. A long press during the dimming process dims up and ends the snooze mode.
...
more
Compilation | other |
Of operation | Tip button |
App control via Bluetooth | no |
Dimming Phase control | no |
Dimming Phase section | no |
Series dimmer | no |
Load type | capacitive load |
Extension input | no |
Light value memory | yes |
Suitable with button | yes |
Usable with motion detector | yes |
Suitable with presence detector | yes |
Usable with timer / timer | yes |
Suitable with radio button | no |
Usable with IR button | no |
Mounting | REG |
Mounting | Fastening with screw |
Material | Plastic |
Material quality | Thermoplastic |
Halogen free | yes |
Surface protection | other |
Execution of the surface | frosted |
Colour | blue |
Transparent | no |
Control voltage | 8..230 V |
Connection | Screw terminal |
Core cross-section | 6 mm² |
Device width | 55 mm |
Device height | 45 mm |
Device depth | 33 mm |
Compatible with Apple HomeKit | no |
Compatible with Google Assistant | no |
Compatible with Amazon Alexa | no |
IFTTT support available | no |
Cookie settings
This website uses cookies that are required for the technical operation of the website and always stored. Other cookies that enhance convenience when using this website, or that are intended for direct marketing or to simplify interaction with other websites and social networks, are only stored with your consent.
Configuration
Technically required
These cookies are required for the basic functions of the shop.
Accept all cookies
Amazon Pay
CSRF token
Cookie settings
Currency change
Customer recognition
Customer-specific caching
FACT-Finder tracking
Individual prices
Reject all cookies
Selected shop
Session
Wish list
Device recognition
Saferpay payments
PayPal payments
IP2location
Listing settings
Trustami
Wishlist
TagManager
Statistics and tracking
Google analytics
Partner program
Custom tracking