Surge dimming switch EUD61NPN-UC
EUD61NPN-UC
61100801
4010312107874
EAN/GTIN
DE 30298319
WEEE
Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.
Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.
Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Impulse dimmer switch EUD61NPN-UC composition other, touch operation, dimming leading edge,...
more
Surge dimming switch EUD61NPN-UC – Eltako – 61100801 – 4010312107874: Impulse dimmer switch EUD61NPN-UC composition other, touch operation, dimming leading edge, dimming trailing edge, load type universal, light value memory, can be used with button, type of mounting flush-mounted, type of mounting with screw, material plastic, material quality thermoplastic, halogen-free, surface other, design of Surface matt, color blue, rated voltage 230 ... 230V, control voltage 8 ... 230V, rated power 0 ... 400VA, connection type screw terminal, wire cross section 4 ... 4mm², device width 45mm, device height 45mm, device depth 18mm, min. depth of Device box 18mm, universal dimmer switch. Power MOSFET up to 400W. Automatic lamp detection. Standby loss only 0.1 watts. Minimum brightness or dimming speed adjustable. With children's room and snooze switch. For flush mounting. 45mm long, 45mm wide, 18mm deep. Universal dimmer switch for lamps up to 400W, depending on the ventilation conditions. Dimmable energy-saving lamps ESL and dimmable 230V LED lamps also depend on the lamp electronics. Switching at zero crossing with soft on and soft off to protect the lamp. Universal control voltage 8..230V UC, electrically isolated from the 230V supply and switching voltage. No minimum load required. Short control commands switch on/off, permanent control changes the brightness up to the maximum value. An interruption of the control changes the dimming direction. The set brightness level is saved when the device is switched off (memory). In the event of a power failure, the switching position and the brightness level are saved and, if necessary, switched on when the supply voltage returns. Automatic electronic overload protection and over-temperature shutdown. The upper %lamp/dim-speed rotary switch can be used to set either the dimming speed or the minimum brightness (fully dimmed). The duration of soft on and soft off is also changed with the dimming speed. During operation, the lower rotary switch determines whether the automatic lamp recognition should take effect or special comfort positions: AUTO allows dimming of all lamp types. EC1 is a comfort position for energy-saving lamps, which, due to their design, have to be switched on with an increased voltage so that they can also be safely switched on again when dimmed when cold. EC2 is a comfort position for energy-saving lamps which, due to their construction, cannot be switched on again when they are dimmed. Therefore memory is switched off in this position. LC1 is a comfort position for LED lamps which, due to their construction, cannot be dimmed down far enough to AUTO (trailing edge) and must therefore be forced to phase control. LC2 and LC3 are comfort positions for LED lamps like LC1 but with different dimming curves. No inductive (wound) transformers may be used in positions EC1, EC2, LC1, LC2 and LC3. In addition, the maximum number of dimmable LED lamps can be lower than in the AUTO position due to the design. With children's room circuit: When switching on by pressing the button for a longer period of time, the brightness level is switched on after approx. With snooze function: A double impulse dims the lighting from the current dimming setting down to minimum brightness and then switches it off. The maximum dimming time of 60 minutes depends on the current dimming setting and the set minimum brightness and can be shortened accordingly. You can switch off at any time during the dimming process by briefly pressing the button. A long press during the dimming process dims up and ends the snooze mode. L loads (inductive loads, eg wound transformers) and C loads (capacitive loads, eg electronic transformers and LED lamps) must not be mixed. R loads (ohmic loads, e.g. 230V incandescent and halogen lamps) can be added as desired.
...
more
Compilation | other |
Of operation | Tip button |
App control via Bluetooth | no |
Dimming Phase control | yes |
Dimming Phase section | yes |
Series dimmer | no |
Load type | universal |
Extension input | no |
Light value memory | yes |
Suitable with button | yes |
Usable with motion detector | no |
Suitable with presence detector | no |
Usable with timer / timer | no |
Suitable with radio button | no |
Usable with IR button | no |
Mounting | Flush |
Mounting | Fastening with screw |
Material | Plastic |
Material quality | Thermoplastic |
Halogen free | yes |
Surface protection | other |
Execution of the surface | frosted |
Colour | blue |
Transparent | no |
Nominal voltage | 230V |
Control voltage | 8..230 V |
Rated capacity resistive load | 400W |
Rated capacity inductive load | 400 VA |
Rated capacity capacitive load | 400 VA |
Max. switching capacity LED | 400W |
Connection | Screw terminal |
Core cross-section | 4 mm² |
Device width | 45 mm |
Device height | 45 mm |
Device depth | 18 mm |
Min. depth of the device socket | 18 mm |
Compatible with Apple HomeKit | no |
Compatible with Google Assistant | no |
Compatible with Amazon Alexa | no |
IFTTT support available | no |
Cookie settings
This website uses cookies that are required for the technical operation of the website and always stored. Other cookies that enhance convenience when using this website, or that are intended for direct marketing or to simplify interaction with other websites and social networks, are only stored with your consent.
Configuration
Technically required
These cookies are required for the basic functions of the shop.
Accept all cookies
Amazon Pay
CSRF token
Cookie settings
Currency change
Customer recognition
Customer-specific caching
FACT-Finder tracking
Individual prices
Reject all cookies
Selected shop
Session
Wish list
Device recognition
Saferpay payments
PayPal payments
IP2location
Listing settings
Trustami
Wishlist
TagManager
Statistics and tracking
Google analytics
Partner program
Custom tracking