Accessories terminals

Terminals are often used in control cabinet construction and in electrical installation in general. They are used to connect wires, cables, veins and lines. This creates a solid and conductive contact, which in most cases is established either via a screw connection, a clamp connection or a cutting connection. These connections can also be undone if necessary. But all too often it happens that the pure clamp connection is not enough. If connecting bridges, protective caps, isolating plugs, adapters, operating tools, retaining brackets or cover profiles are required, then you will find numerous inexpensive terminal accessories here in the eibabo online shop with which you can complete and optimize your installation. And since accessories and small parts are often needed more often, you can get these products both individually and in sensible packaging units.

Catalogue content:


In this eibabo® catalogue Terminal blocks > Accessories for terminals you will find items from the following product groups:

Item overview:

  • Accessories for clamps
  • Accessories for terminals
  • Accessories/spare parts for terminals
  • Accessory for terminal block
  • Blind terminal
  • Clamp bracket
  • Clamping bracket
  • Countersunk screw
  • Cover
  • Dummy plug
  • Insulating bar
  • Insulating bridge
  • Insulating sleeve
  • Insulating web
  • Mounting base
  • Mounting foot
  • Reducing plug
  • Screw
  • Screw cap
  • Short circuit plug
  • Shorting plug
  • Spare parts for terminals
  • Test plug
  • Test plug socket
  • Test socket
  • Test tap
  • Unlocking tool
  • Washer


from the following manufacturers:

Manufacturer overview catalogue Accessories terminals:

  • Hager
  • Hensel
  • Phoenix
  • Schneider Electric
  • Striebel & John
  • WAGO
  • Weidmüller
  • Wieland
  • Wöhner


 
Terminals are often used in control cabinet construction and in electrical installation in general. They are used to connect wires, cables, veins and lines. This creates a solid and conductive... read more »
Close window
Accessories terminals
Terminals are often used in control cabinet construction and in electrical installation in general. They are used to connect wires, cables, veins and lines. This creates a solid and conductive contact, which in most cases is established either via a screw connection, a clamp connection or a cutting connection. These connections can also be undone if necessary. But all too often it happens that the pure clamp connection is not enough. If connecting bridges, protective caps, isolating plugs, adapters, operating tools, retaining brackets or cover profiles are required, then you will find numerous inexpensive terminal accessories here in the eibabo online shop with which you can complete and optimize your installation. And since accessories and small parts are often needed more often, you can get these products both individually and in sensible packaging units.

Catalogue content:


In this eibabo® catalogue Terminal blocks > Accessories for terminals you will find items from the following product groups:

Item overview:

  • Accessories for clamps
  • Accessories for terminals
  • Accessories/spare parts for terminals
  • Accessory for terminal block
  • Blind terminal
  • Clamp bracket
  • Clamping bracket
  • Countersunk screw
  • Cover
  • Dummy plug
  • Insulating bar
  • Insulating bridge
  • Insulating sleeve
  • Insulating web
  • Mounting base
  • Mounting foot
  • Reducing plug
  • Screw
  • Screw cap
  • Short circuit plug
  • Shorting plug
  • Spare parts for terminals
  • Test plug
  • Test plug socket
  • Test socket
  • Test tap
  • Unlocking tool
  • Washer


from the following manufacturers:

Manufacturer overview catalogue Accessories terminals:

  • Hager
  • Hensel
  • Phoenix
  • Schneider Electric
  • Striebel & John
  • WAGO
  • Weidmüller
  • Wieland
  • Wöhner
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to

1 From 52
No results were found for the filter!
RECOMMENDED
3D
WAGO - 221-2502 - Mounting adapter with strain relief - Accessory for terminal 221-2502
$14.26 excl. VAT

*

(For 25 Piece) plus shipping
Mounting adapter with strain relief - Accessory for terminal
WAGO
| 221-2502
x 25 Piece
Add to wishlist
RECOMMENDED
3D
Phoenix - CASE PTI INSTA L-BOX - Starter kit - Accessory for terminal CASE PTI INSTA L-BOX
$241.51 excl. VAT

*

plus shipping
($433.32 RRP***)
Starter kit - Accessory for terminal
Phoenix
| CASE PTI INSTA L-BOX
RECOMMENDED
3D
RECOMMENDED
3D
WAGO - 243-113 - Mounting adapter - Accessory for terminal 243-113
$2.72 excl. VAT

*

(For 10 Piece) plus shipping
($4.72 RRP***)
Mounting adapter - Accessory for terminal
WAGO
| 243-113
x 10 Piece
Add to wishlist
RECOMMENDED
3D
Hager - KN00A - SSK, adapter, empty - Accessory for terminal KN00A
$3.17 excl. VAT

*

plus shipping
($5.17 RRP***)
SSK, adapter, empty - Accessory for terminal
Hager
| KN00A
RECOMMENDED
3D
Phoenix - CASE KNXL-BOXXMINIDE - Starter kit - Feed-through terminal block 260mm 16A CASE KNXL-BOXXMINIDE
$89.05 excl. VAT

*

plus shipping
($161.79 RRP***)
Starter kit - Feed-through terminal block 260mm 16A
Phoenix
| CASE KNXL-BOXXMINIDE
RECOMMENDED
3D
WAGO - 243-112 - Mounting adapter - Accessory for terminal 243-112
$2.52 excl. VAT

*

(For 10 Piece) plus shipping
($4.27 RRP***)
Mounting adapter - Accessory for terminal
WAGO
| 243-112
x 10 Piece
Add to wishlist
RECOMMENDED
3D
RECOMMENDED
3D
WAGO - 2009-310 - Operating tool for installation clamp - Accessory for terminal 2009-310
$12.30 excl. VAT

*

plus shipping
($18.98 RRP***)
Operating tool for installation clamp - Accessory for terminal
WAGO
| 2009-310
RECOMMENDED
3D
WAGO - 777-310 - Operating tool topJob - Accessory for terminal 777-310
$6.46 excl. VAT

*

plus shipping
($9.98 RRP***)
Operating tool topJob - Accessory for terminal
WAGO
| 777-310
RECOMMENDED
3D
1 From 52
Viewed from you