Blind cover duct outlet

You are erecting a building and want to pour concrete walls and ceilings. If an electrical installation is planned within these building components, you must also create the necessary prerequisites for this beforehand. This will later enable you to pull in the electrical installation quickly and easily. For this case, the eibabo online shop has a wide variety of modules that, when combined, form a complete system of empty conduits and cable outlets. This means that you carry out this pre-installation within the formwork and then pour the formwork with concrete. So that the concrete does not run into the pre-installation, you will also find the matching blind covers for the cable outlets here in the shop. These reliably close your empty piping and can also be easily removed again later after dismantling the pouring shell. Another type of blind covers are those that are mounted together with cover frames from the respective switch ranges. You use this, for example, if you had intended a button or switch, but this was not installed. You use it to cover an empty flush-mounted box in a visually appealing way to match the rest of your switch range.

Catalogue content:


In this eibabo® catalogue Sub-floor systems > Blind plate for duct exit you will find items from the following product groups:

Item overview:

  • Blind cover
  • Blind cover duct outlet
  • Blind cover for duct outlet
  • Blind plate for duct exit
  • Cover
  • Cover plate
  • Electra plan
  • Heavy Duty Cassette
  • Installation
  • Stainless steel cassette
  • Ventilation unit


from the following manufacturers:

Manufacturer overview catalogue Blind cover duct outlet:

  • OBO
  • Tehalit


 
You are erecting a building and want to pour concrete walls and ceilings. If an electrical installation is planned within these building components, you must also create the necessary prerequisites... read more »
Close window
Blind cover duct outlet
You are erecting a building and want to pour concrete walls and ceilings. If an electrical installation is planned within these building components, you must also create the necessary prerequisites for this beforehand. This will later enable you to pull in the electrical installation quickly and easily. For this case, the eibabo online shop has a wide variety of modules that, when combined, form a complete system of empty conduits and cable outlets. This means that you carry out this pre-installation within the formwork and then pour the formwork with concrete. So that the concrete does not run into the pre-installation, you will also find the matching blind covers for the cable outlets here in the shop. These reliably close your empty piping and can also be easily removed again later after dismantling the pouring shell. Another type of blind covers are those that are mounted together with cover frames from the respective switch ranges. You use this, for example, if you had intended a button or switch, but this was not installed. You use it to cover an empty flush-mounted box in a visually appealing way to match the rest of your switch range.

Catalogue content:


In this eibabo® catalogue Sub-floor systems > Blind plate for duct exit you will find items from the following product groups:

Item overview:

  • Blind cover
  • Blind cover duct outlet
  • Blind cover for duct outlet
  • Blind plate for duct exit
  • Cover
  • Cover plate
  • Electra plan
  • Heavy Duty Cassette
  • Installation
  • Stainless steel cassette
  • Ventilation unit


from the following manufacturers:

Manufacturer overview catalogue Blind cover duct outlet:

  • OBO
  • Tehalit
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to

No results were found for the filter!
Tehalit - EKSQ405BL - Heavy duty cassette blind Q405 28/44mm - Blind plate for duct exit EKSQ405BL
$701.74 excl. VAT

*

plus shipping bulky item
($1,663.67 RRP***)
Heavy duty cassette blind Q405 28/44mm - Blind plate for duct exit
Tehalit
| EKSQ405BL
Tehalit - EKR0600BL2 - Stainless steel cassette for 6 Inst devices - Blind plate for duct exit EKR0600BL2
$348.66 excl. VAT

*

plus shipping
($714.63 RRP***)
Stainless steel cassette for 6 Inst devices - Blind plate for duct exit
Tehalit
| EKR0600BL2
Vaillant - 20142143 (VE10) - Sealing caps for flexible air hose - Control valve, round air duct 20142143 (VE10)
$32.32 excl. VAT

*

plus shipping
($39.37 RRP***)
Sealing caps for flexible air hose - Control valve, round air duct
Vaillant
| 20142143 (VE10)
Vaillant - 20180823 (VE10) - Sealing caps for air hoses 52x132mm - Control valve, round air duct 20180823 (VE10)
$35.08 excl. VAT

*

plus shipping
($42.74 RRP***)
Sealing caps for air hoses 52x132mm - Control valve, round air duct
Vaillant
| 20180823 (VE10)
Vaillant - 0020060592 - Closure for condensing technology - Blind plate for duct exit 0020060592
$31.32 excl. VAT

*

plus shipping bulky item
($41.62 RRP***)
Closure for condensing technology - Blind plate for duct exit
Vaillant
| 0020060592
Vaillant - 0020060593 - Closure for condensing technology - Blind plate for duct exit 0020060593
$45.70 excl. VAT

*

plus shipping bulky item
($60.74 RRP***)
Closure for condensing technology - Blind plate for duct exit
Vaillant
| 0020060593
Closure exhaust system DN 60 - Blind plate for duct exit 0010044785
$61.79 excl. VAT

*

plus shipping bulky item
($82.12 RRP***)
Closure exhaust system DN 60 - Blind plate for duct exit
Vaillant
| 0010044785
Closure exhaust system DN 80 - Blind plate for duct exit 0010044784
$65.16 excl. VAT

*

plus shipping bulky item
($86.61 RRP***)
Closure exhaust system DN 80 - Blind plate for duct exit
Vaillant
| 0010044784
Viewed from you