Conduit end grommet

Your installation rarely corresponds to the length of the installation pipes you use. As a result, you always have to cut the last pipe to the required size. If you use pliers or a saw for this, a burr will appear on the cutting edge, which in the worst case can chafe the insulation of your cables and lines. Then the conductors are exposed and pose a potential safety risk. To prevent this, provide the ends of your installation pipes with end sleeves and thus create a proper pipe termination and edge protection. In the eibabo technology store there are inexpensive end sleeves made of high-quality plastic and aluminum for installation pipes of different dimensions. If you need more, simply use the larger packaging units.

Catalogue content:


In this eibabo® catalogue Installation pipes/cable protection tubes > Terminal sleeve for installation tubes you will find items from the following product groups:

Item overview:

  • Aluminum plug
  • Cable protection
  • Closure
  • Conduit end socket
  • Conduit grommet
  • End socket for installation pipes
  • End spout
  • Foundation pipe
  • Grommet
  • Metal end spout
  • Metal pipe end fitting
  • Pipe edge protection
  • Pipe end socket
  • Plastic end cap
  • Plug-in socket
  • Stainless steel end spout
  • Stainless steel plug
  • Steel armored pipe end socket
  • Terminal sleeve for installation tubes
  • Threaded end socket


from the following manufacturers:

Manufacturer overview catalogue Conduit end grommet:

  • Fränkische
  • Kleinhuis
  • OBO
  • Rico


 
Your installation rarely corresponds to the length of the installation pipes you use. As a result, you always have to cut the last pipe to the required size. If you use pliers or a saw for this, a... read more »
Close window
Conduit end grommet
Your installation rarely corresponds to the length of the installation pipes you use. As a result, you always have to cut the last pipe to the required size. If you use pliers or a saw for this, a burr will appear on the cutting edge, which in the worst case can chafe the insulation of your cables and lines. Then the conductors are exposed and pose a potential safety risk. To prevent this, provide the ends of your installation pipes with end sleeves and thus create a proper pipe termination and edge protection. In the eibabo technology store there are inexpensive end sleeves made of high-quality plastic and aluminum for installation pipes of different dimensions. If you need more, simply use the larger packaging units.

Catalogue content:


In this eibabo® catalogue Installation pipes/cable protection tubes > Terminal sleeve for installation tubes you will find items from the following product groups:

Item overview:

  • Aluminum plug
  • Cable protection
  • Closure
  • Conduit end socket
  • Conduit grommet
  • End socket for installation pipes
  • End spout
  • Foundation pipe
  • Grommet
  • Metal end spout
  • Metal pipe end fitting
  • Pipe edge protection
  • Pipe end socket
  • Plastic end cap
  • Plug-in socket
  • Stainless steel end spout
  • Stainless steel plug
  • Steel armored pipe end socket
  • Terminal sleeve for installation tubes
  • Threaded end socket


from the following manufacturers:

Manufacturer overview catalogue Conduit end grommet:

  • Fränkische
  • Kleinhuis
  • OBO
  • Rico
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to

1 From 8
No results were found for the filter!
RECOMMENDED
3D
Fränkische - E-Ku-E 32 - Gray plastic end cap - End-spout for tube 32mm E-Ku-E 32
$0.58 excl. VAT

*

plus shipping
($1.90 RRP***)
Gray plastic end cap - End-spout for tube 32mm
Fränkische
| E-Ku-E 32
RECOMMENDED
3D
Fränkische - AES-E 25 - Aluminum plug-in end sleeve for aluminum plug-ES - End-spout for tube 25mm AES-E 25
$3.24 excl. VAT

*

plus shipping
($22.43 RRP***)
Aluminum plug-in end sleeve for aluminum plug-ES - End-spout for tube 25mm
Fränkische
| AES-E 25
RECOMMENDED
3D
Fränkische - AES-E 20 - Aluminum plug-in end sleeve for aluminum plug-ES - End-spout for tube 20mm AES-E 20
$2.88 excl. VAT

*

plus shipping
($20.37 RRP***)
Aluminum plug-in end sleeve for aluminum plug-ES - End-spout for tube 20mm
Fränkische
| AES-E 20
RECOMMENDED
3D
Fränkische - AES-E 32 - Aluminum plug-in end sleeve for aluminum plug-ES - End-spout for tube 32mm AES-E 32
$3.43 excl. VAT

*

plus shipping
($24.71 RRP***)
Aluminum plug-in end sleeve for aluminum plug-ES - End-spout for tube 32mm
Fränkische
| AES-E 32
RECOMMENDED
3D
RECOMMENDED
3D
Fränkische - E-Ku-E 25 - Gray plastic end cap - End-spout for tube 25mm E-Ku-E 25
$0.43 excl. VAT

*

plus shipping
($1.33 RRP***)
Gray plastic end cap - End-spout for tube 25mm
Fränkische
| E-Ku-E 25
RECOMMENDED
3D
Fränkische - AES-E 40 - Aluminum plug-in end sleeve for aluminum plug-ES - End-spout for tube 40mm AES-E 40
$4.95 excl. VAT

*

plus shipping
($30.45 RRP***)
Aluminum plug-in end sleeve for aluminum plug-ES - End-spout for tube 40mm
Fränkische
| AES-E 40
RECOMMENDED
3D
Fränkische - E-Ku-E 40 - Gray plastic end cap - End-spout for tube 40mm E-Ku-E 40
$0.81 excl. VAT

*

plus shipping
($2.60 RRP***)
Gray plastic end cap - End-spout for tube 40mm
Fränkische
| E-Ku-E 40
RECOMMENDED
3D
Fränkische - E-Ku-E 50 - Gray plastic end cap - End-spout for tube 50mm E-Ku-E 50
$1.45 excl. VAT

*

plus shipping
($4.29 RRP***)
Gray plastic end cap - End-spout for tube 50mm
Fränkische
| E-Ku-E 50
RECOMMENDED
3D
Fränkische - E-Ku-E 20 sw UV - Plastic end cap black, UV-resistant - End-spout for tube 20mm E-Ku-E 20 sw UV
$0.36 excl. VAT

*

plus shipping
($1.11 RRP***)
Plastic end cap black, UV-resistant - End-spout for tube 20mm
Fränkische
| E-Ku-E 20 sw UV
RECOMMENDED
3D
Fränkische - E-Ku-E 32 sw UV - Black plastic end cap, UV-resistant - End-spout for tube 32mm E-Ku-E 32 sw UV
$0.58 excl. VAT

*

plus shipping
($1.90 RRP***)
Black plastic end cap, UV-resistant - End-spout for tube 32mm
Fränkische
| E-Ku-E 32 sw UV
RECOMMENDED
3D
1 From 8
Viewed from you