Input module digital - Fieldbus digital module 20 In / 0 Out XN-322-20DI-PF

Eaton - XN-322-20DI-PF - Input module digital - Fieldbus digital module 20 In / 0 Out XN-322-20DI-PF
Photo source: fig. possibly similar
Photo source: fig. possibly similar
XN-322-20DI-PF 178768 7640130098329 EAN/GTIN DE 92318050 WEEE

$140.99 excl. VAT

15-16 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Supply voltage at AC 50 Hz 0 V, Supply voltage at AC 60 Hz 0 V, Supply voltage at DC 18..30 V,... more
Input module digital - Fieldbus digital module 20 In / 0 Out XN-322-20DI-PF – Eaton – 178768 – 7640130098329: Supply voltage at AC 50 Hz 0 V, Supply voltage at AC 60 Hz 0 V, Supply voltage at DC 18..30 V, Voltage type of the supply voltage DC, Number of digital inputs 20, Digital inputs configurable no, Digital outputs configurable no, Input current at signal 1 3.7mA, Permissible voltage at the input 30 V, Type of input voltage DC, Type of digital output without, Output current 0A, Permissible voltage at the output 0 V, Type of output voltage DC, Short-circuit protection, outputs available no, Number of HW interfaces other 1, With optical interface no, Supports protocol for TCP / IP no, Supports protocol for PROFIBUS no, Supports protocol for CAN no, Supports protocol for INTERBUS no, Supports protocol for ASI no, Supports protocol for KNX no, Supports protocol for MODBUS no, Supports data highway protocol no, Supports protocol for DeviceNet no, Supports protocol for SUCONET no, Supports protocol for LON no, Supports protocol for PROFINET IO no, Supports protocol for PROFINET CBA no, Supports protocol for SERCOS no, Supports protocol for EtherNet / IP no, Supports protocol for DeviceNet Safety no, Supports protocol for INTERBUS safety no, Supports protocol for PROFIsafe no, Supports protocol for SafetyBUS p no, Supports protocol for other bus systems yes, Wireless standard Bluetooth no, Wireless standard WLAN 802.11 no, Radio standard GPRS no, Radio standard GSM no, Radio standard UMTS no, IO-Link master no, System component yes, IP protection) IP20, Delay time with signal change 0..0,5 ms, Rail mounting possible yes, Wall / direct mounting possible no, Front installation possible no, Rack mounting possible no, Suitable for safety functions no, SIL according to IEC 61508 without, Performance level according to EN ISO 13849-1 without, Associated equipment (Ex ia) no, Associated equipment (Ex ib) no, Explosion protection category for gas without, Explosion protection category for dust without, Width 16.8 mm, Height 104.2 mm, Depth 80.3 mm
... more
Supply voltage at AC 50 Hz 0 V
Supply voltage at AC 60 Hz 0 V
Supply voltage at DC 18..30 V
Voltage type of the supply voltage DC
Number of digital inputs 20
Digital inputs configurable no
Digital outputs configurable no
Input current at signal 1 3.7mA
Permissible voltage at the input 0..30V
Type of input voltage DC
Type of digital output without
Output current 0A
Permissible voltage at the output 0 V
Type of output voltage DC
Short-circuit protection, outputs available no
Number of HW interfaces other 1
With optical interface no
Supports protocol for TCP / IP no
Supports protocol for PROFIBUS no
Supports protocol for CAN no
Supports protocol for INTERBUS no
Supports protocol for ASI no
Supports protocol for KNX no
Supports protocol for MODBUS no
Supports data highway protocol no
Supports protocol for DeviceNet no
Supports protocol for SUCONET no
Supports protocol for LON no
Supports protocol for PROFINET IO no
Supports protocol for PROFINET CBA no
Supports protocol for SERCOS no
Supports protocol for EtherNet / IP no
Supports protocol for DeviceNet Safety no
Supports protocol for INTERBUS safety no
Supports protocol for PROFIsafe no
Supports protocol for SafetyBUS p no
Supports protocol for other bus systems yes
Wireless standard Bluetooth no
Wireless standard WLAN 802.11 no
Radio standard GPRS no
Radio standard GSM no
Radio standard UMTS no
IO-Link master no
System component yes
IP protection) IP20
Delay time with signal change 0,4..0,6 ms
Rail mounting possible yes
Wall / direct mounting possible no
Front installation possible no
Rack mounting possible no
Suitable for safety functions no
SIL according to IEC 61508 without
Performance level according to EN ISO 13849-1 without
Associated equipment (Ex ia) no
Associated equipment (Ex ib) no
Explosion protection category for gas without
Explosion protection category for dust without
Width 80.3 mm
Height 16.8 mm
Depth 104.2 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Input module digital - Fieldbus digital module 20 In / 0 Out XN-322-20DI-PF"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.