Phase rail - Phase busbar 3-p 10mm² 140mm EV-S G 4.8.120

Phase rail - Phase busbar 3-p 10mm² 140mm EV-S G 4.8.120 – Doepke – 09920122 – 4014712021631: Phase bar EV-S G 4.8.120 number of phases 3, number of poles 4, suitable for number of devices 2, pitch 17.5mm, cross section 10mm², length 140mm, number of pitch units 8, rated uninterrupted current Iu 63A, design of the electrical connection fork, insulated, Rated impulse voltage 4.5kV, conditional rated short-circuit current Iq 15kA, max. rated operating voltage Ue 690V, rated short-time withstand current Icw 15kA, suitable for devices with N conductors, these components for wiring circuit breakers in industrial, commercial and private electrical distributors significantly reduce the installation effort. The ready-cut busbars of the Eurovario system are suitable for the supply-side connection of residual current circuit breakers, miniature circuit breakers and RCBO/LS combinations on the underside of the devices. The busbars have a fork design and are available in a wide variety of versions with one to four poles (some with space for auxiliary switches). The touch protection EV-S BS covers unused connections. Properties: can be used to connect residual current circuit breakers, miniature circuit breakers and RCBO combinations, large variety of variants, small design, saves a lot of time when wiring, type of installation: the rails are plugged into the upper or lower connection terminals of the devices to be connected. Areas of application: Busbars of this series are used in conjunction with RCCB. MCB and RCBO used in power supplies of residential and non-residential buildings as well as industrial plants. Notes: The EV-S G ANL (N on the left) or EV-S G ANR (N on the right) connection rails must be used when feeding miniature circuit breakers from above in combination with Doepke residual current circuit breakers.