Thin-bed heating mat 150 W/m, 12sqm - Thin-bed heating 150W/m² 12m² 140F0458

Thin-bed heating mat 150 W/m, 12sqm - Thin-bed heating 150W/m² 12m² 140F0458 – Devi – 5703466203491: Thin-bed heating mat 150 W/m,12qm 140F0458 Thin-bed heating application, connection voltage 230V, connected load 1800 ... 1800W, output 150W/m², heat conductor load 11W/m, with carrier mat, fixation of the heat conductor glued on, number of PTC thermistors 1, length of the PTC thermistors 24000mm , Suitable for wet rooms, area 12m², width 500mm, thickness 3.5mm, self-adhesive, thin-bed heating mat with a connecting cable and suitable sensor protection tube DN10 with red cap. The self-adhesive thin-bed heating mat with a connecting cable is ready for installation and was specially developed for installation in leveling compound or flexible adhesive directly below the floor covering. Due to the low installation height of only 3.2 mm, it is ideal for the renovation and modernization of bathrooms, showers, kitchens, etc. This underfloor temperature control system is particularly suitable for retrofitting in angled and/or large rooms, since the second connection can be fed back omitted. The heating cable with additional protective braiding for use with the FI protective circuit is attached to a plastic mesh. The length of the connecting cables is 4.0 m. PTC thermistor: 1 x 4 m, 1.0 mm², voltage: 230 V, nominal limit temperature: 120°C, specific heating output: 150 W/m², linear load: 11 W, insulation: PVDF / FEP. Resistance tolerance: +10% / -5%, minimum installation temperature: 5°C, smallest bending radius: 6 x dA, calculation width 50 cm, delivery width: 48 cm, mat height: 3.2 mm, protection class: IPX7, approval: EN 60335-2- 96, area 12 m², 0.5 x 24.0 m