Thin bed heating mat 100 W/m, 1.5 sqm 140F0416

Devi - 140F0416 - Thin bed heating mat 100 W/m, 1.5 sqm 140F0416
Photo source: fig. possibly similar
Photo source: fig. possibly similar
140F0416 5703466203071 EAN/GTIN DE 66490570 WEEE

Our best price
$191.81 excl. VAT
$275.59 (-30.4% RRP***)

15-16 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Thin-bed heating mat 100 W/m, 1.5 sqm 140F0416 Thin-bed heating application, connection voltage... more
Thin bed heating mat 100 W/m, 1.5 sqm 140F0416 – Devi – 5703466203071: Thin-bed heating mat 100 W/m, 1.5 sqm 140F0416 Thin-bed heating application, connection voltage 230V, connected load 150 ... 150W, power 100W/m², heat conductor load 11W/m, with carrier mat, fixation of the heat conductor glued on, number of PTC thermistors 1, length of PTC thermistor 4000mm, suitable for wet rooms, area 1.5m², length 3000mm, width 500mm, thickness 3.5mm, self-adhesive, thin-bed heating mat with a connecting cable and suitable sensor protection tube DN10 with red cap. The self-adhesive thin-bed heating mat with a connecting cable is ready for installation and was specially developed for installation in leveling compound or flexible adhesive directly below the floor covering. Due to the low installation height of only 3.2 mm, it is ideal for the renovation and modernization of bathrooms, showers, kitchens, etc. This underfloor temperature control system is particularly suitable for retrofitting in angled and/or large rooms, since the second connection can be fed back omitted. The heating cable with additional protective braiding for use with the FI protective circuit is attached to a plastic mesh. The length of the connecting cables is 4.0 m. PTC thermistor: 1 x 4 m, 1.0 mm², voltage: 230 V, nominal limit temperature: 120°C, specific heating output: 100 W/m², linear load: 11W, insulation: PVDF / FEP. Resistance tolerance: +10% / -5%, minimum installation temperature: 5°C, smallest bending radius: 6 x dA, calculation width 50 cm, delivery width: 48 cm, mat height: 3.2 mm, protection class: IPX7, approval: EN 60335-2- 96, area 1.5 m², 0.5 x 3.0 m
... more
Execution Heating foil
With carrier mat yes
Fixation of the heating conductor Glued
Self-adhesive yes
Power consumption -150 W
Power 100 W/m²
Heizleiterbelastung 11 W/m
Number of PTC thermistors 1
Length of PTC thermistors 4000 mm
Suitable for damp areas yes
Suitable as open space heating no
Suitable as roof heating no
Area 1.5 m²
Length 3000 mm
Width 500 mm
Strength 3.5 mm
With regulator no
With room thermostat no
With floor temperature sensor no

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Thin bed heating mat 100 W/m, 1.5 sqm 140F0416"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.