Combined arrester DEHNshield type 1+2, 1-p. TN Sys - Combined arrester for power systems DSH TN 2...

DSH TN 255 FM 941205 4013364289185 EAN/GTIN DE 11890845 WEEE

Our best price
$243.97 excl. VAT
$462.68 (-47.27% RRP***)

4-5 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Combined arrester DEHNshield type 1+2, 1-p. TN Sys DSH TN 255 FM network configuration TN, number... more
Combined arrester DEHNshield type 1+2, 1-p. TN Sys - Combined arrester for power systems DSH TN 2... – Dehn – 941205 – 4013364289185: Combined arrester DEHNshield type 1+2, 1-p. TN Sys DSH TN 255 FM network configuration TN, number of poles 2, lightning impulse current (10/350 µs) 25kA, maximum continuous voltage AC 255V, nominal voltage AC 230V, protection level 1.5kV, protection level L-PE 1.5kV, protection level N-PE 1.5kV , follow current extinguishing capability 25kA, specific energy (W/R) 156.25kJ/Ohm, max. conductor cross section solid (single/stranded) 35mm², max Device optical, test class type 1 and 2, energy-coordinated protective effect to the end device, degree of protection (IP) IP20, multi-pole, application-optimized combined arrester DEHNshield, type 1 + type 2 according to EN 61643-11 based on spark gaps. Space-saving spark gap technology with only 1 TE / pole enables a compact design. For the protection of residential buildings and for use in special applications. Enables endpoint protection. For protection against overvoltages, even in the case of direct lightning strikes. Can be used according to the lightning protection zone concept at the interfaces 0A - 2.
... more
Network form DC no
Network form IT no
Network shape TN yes
Mains form TN-C no
Mains form TN-CS no
Mains form TN-S no
Network shape TT no
Network form other no
Number of poles 2
Lightning impulse current (10/350 µs) 25 kA
Highest continuous voltage AC 255V
Rated voltage AC 230V
Protection level 1.5 kV
Protection level L-PE 1.5 kV
Protection level N-PE 1.5 kV
Follow current extinguishing capability 25 kA
Specific energy (W / R) 156.25 kJ/ohms
Mounting DIN rail TH35
Size 2 TE
Remote signaling yes
Signaling on the device optical
Test class Type 1 and 2
Integrated backup fuse no
Voltage switching spark gap technology yes
Overcurrent-protected voltage tap-off no
IP protection) IP20

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Combined arrester DEHNshield type 1+2, 1-p. TN Sys - Combined arrester for power systems DSH TN 2..."
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.