LED dimmer insert - Dimmer flush mounted 2VA 6715 U

LED dimmer insert - Dimmer flush mounted 2VA 6715 U – Busch Jaeger – 2CKA006710A0003 – 4011395189221: LED dimmer insert 6715 U Composition of basic element, touch operation, phase control dimming, phase cut dimming, load type universal and LED retrofit, light value memory, can be used with button, can be used with radio button, flush-mounted installation type, fastening type claw/screw fastening, material plastic, material quality Thermoplastic, halogen-free, surface untreated, surface finish matt, color black, suitable for degree of protection (IP) IP20, impact resistance IK00, rated voltage 207 ... 207V, frequency 50 ... 50Hz, control voltage 220 ... 220V, rated power 2 . .. 2VA, connection type screw terminal, core cross-section 75 ... 75mm², device width 71mm, device height 71mm, device depth 33mm, min. depth of device socket 32mm, touch dimmer For switching and dimming electrical loads wirelessly. 3-wire connection technology (neutral wire required). Optimized for dimming retrofit LED lamps (LEDi). For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers and dimmable halogen energy-saving lamps. Mixed load operation LEDi and conventional lamps possible. With adjustable minimum brightness. Minimum brightness with phase control adjustable via potentiometer. Potentiometer fully left corresponds to trailing edge operating mode. Low-noise through the use of MOSFET transistors. Protected against short circuits and overloads (electronic fuse). With light value storage and minimum brightness storage. Without control element. For control element ZigBee Light Link 6735-xxx, 6736-xxx and 6737-xxx. Rated power: 2 - 100 W/VA (retrofit LED loads). Rated power: 10 - 200 W/VA (Non-LED loads).