Built-in switch 2NO, 400V, 63A, 3.3W - Off switch for distributor 2 NO 0 NC E202/63R

ABB - E202/63R - Built-in switch 2NO, 400V, 63A, 3.3W - Off switch for distributor 2 NO 0 NC E202/63R
Photo source: fig. possibly similar
Photo source: fig. possibly similar
E202/63R 2CDE282001R0063 4016779645904 EAN/GTIN DE 91945327 WEEE

Our best price
$28.84 excl. VAT
$47.10 (-38.77% RRP***)

15-16 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Built-in switch 2NO,400V,63A, 3.3W E202/63R Switching function off switch, number of contacts as... more
Built-in switch 2NO, 400V, 63A, 3.3W - Off switch for distributor 2 NO 0 NC E202/63R – ABB – 2CDE282001R0063 – 4016779645904: Built-in switch 2NO,400V,63A, 3.3W E202/63R Switching function off switch, number of contacts as NO contact 2, number of contacts as NC contact 0, number of contacts as changeover contact 0, number of poles 2, rated current 63A, rated voltage 400V, min. rated voltage 12V , short-circuit strength (Icw) 25kA, type of voltage AC, positive disconnection (according to DIN VDE 0113), color of the cap gray, width in modular units 2, installation depth 70mm, protection class (IP) IP10, switch disconnector E 200 for DIN rail mounting according to DIN EN 60715 available with rated currents of 80 - 125 A and conditional rated short-circuit current of 25kA. Attachment of additional auxiliary contacts S2C-H6R possible. Fast removal possible without dismantling the busbar and use of captive screws. Locking device as an accessory prevents unauthorized ON/OFF switching. Certified according to VDE, CCC, EAC, KEMA approvals
... more
Switching function Breaker
Number of contacts as normally open 2
Number of poles 2
Rated current 63 A
Rated voltage 400V
Minimum rated voltage 12V
Short-circuit strength (Icw) 25 kA
Voltage AC
With signal lamp no
Color of the dome gray
Width in division units 2
Depth 70 mm
IP protection) IP10
Imprint / indication without
Forced separation (according to DIN VDE 0113) yes

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Built-in switch 2NO, 400V, 63A, 3.3W - Off switch for distributor 2 NO 0 NC E202/63R"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.